WMWifiRouter v1.01

[D/\SH]

WMWifiRouter v1.01
Requirements: PPC WM5, WM6 - Any Windows Mobile Pocket PC with WiFi connection
Overview: WMWifiRouter is a tool to use your Windows Mobile 6 (possibly 5) as a WiFi <-> GPRS/UMTS/HSPA router. It'll allow you to use WiFi capable devices to connect to the internet through your phone's data connection.
WMWifiRouter is a tool that turns your Windows Mobile device into almost an Access Point. Almost, because it uses an Ad-Hoc (computer-to-computer) connection instead of infrastructure mode. It’s purpose is the same though: allow your WiFi-enabled devices to use your WM device’s data connection to connect to the internet

Get online with any device anywhere.
WMWifiRouter instantly turns your wifi enabled smartphone* into a wireless internet hotspot. Now you can use your laptop and any other device with wifi to get online and surf, email, instant message, and anything else you normally use the internet for!
* check for requirements below

What Do I Need?
To use WMWifiRouter you need the following on your mobile device*:
- Windows Mobile 5 AKU 3.3 or newer or Windows Mobile 6
- Both a wifi and a cellular data connection
- An installed and working version of Internet Sharing**
- 15 MB of free device memory

More Info:
Code:
http://www.wmwifirouter.com/consumer/

Download Instructions: Users of WMWifiRouter version 0.91 and earlier should uninstall it before installing this version, to prevent conflicts.

For some users the normal versions do not install correctly.
There are modified versions of the installer below: ActiveSync - CAB
Note that you should only use these modfied installers if you are having installation issues!

HERE IS A UPDATED VERION WMWIFIROUTER: V.1.03 5/6/08

http://rapidshare.com/files/115832092/WMWiFiRouter.zip.html
Complete with serial
Use Serial to Activate

Serial http://rapidshare.com/files/104687098/Serial.txt

ActiveSync http://rapidshare.com/files/104683483/WMWifiRouter-v1.01.exe
Cab http://rapidshare.com/files/104683481/WMWifiRouter-v1.01.cab
ActiveSync http://rapidshare.com/files/104683485/WMWifiRouter-v1.01i.exe (MODDED VERSION! SEE ABOVE)
Cab http://rapidshare.com/files/104683484/WMWifiRouter-v1.01i.cab (MODDED VERSION! SEE ABOVE)

[sracercelica]

If I access the internet through my laptop with this, will sprint know and charge me more?

[D/\SH]

If I access the internet through my laptop with this, will sprint know and charge me more?

no they wont because you are technically running off of wifi... at least thats the way that i understand it and all....i dont use the app personally but if someone wants to chime in and help that would be great.

[beastman]

I've used the prior version of WMWifiRouter this past month. When my bill posts, I will let you all know if they charge extra.

[BiG JeW]

If you have the unlimited data internet pack on your phone, you will notbe charged!! I use this app religiously, Never been charged...ENJOY!

[beastman]

I didn't use it excessively last month but did use it. No charge to my latest bill.

[D/\SH]

I didn't use it excessively last month but did use it. No charge to my latest bill.

thanks for the update shouldnt charge anyone with the unlimited data package....

[sracercelica]

Im going to download this when I get home. Can anyone tell me if this is better than PDA Net? speedwise? I know that for the 15 min that I got pdanet to work it was impressively fast (faster than my home dsl).

[D/\SH]

Im going to download this when I get home. Can anyone tell me if this is better than PDA Net? speedwise? I know that for the 15 min that I got pdanet to work it was impressively fast (faster than my home dsl).

this si blazing fast and up to 2 times faster than pdanet im using this right now.

[sracercelica]

this si blazing fast and up to 2 times faster than pdanet im using this right now.


cool cant wait to try.

By the way have you ever had any overheating issues? I checked out their website and it said that sometimes it will overheat if you have the phone charging while routing and you have to wait 12 hrs. :(

[BiG JeW]

i personally never ran into the phone overheating to the point i had to wait for 12hrs. The phone does get above normal temp when pluged in and charging, but never overheated OR locked up!

[D/\SH]

i personally never ran into the phone overheating to the point i had to wait for 12hrs. The phone does get above normal temp when pluged in and charging, but never overheated OR locked up!
i myslef havent ever heard this or seen this happen and i used it for hours straight.

[TweetyBear]

thanks for this app. been looking for it like forever.

EDIT: also, do you recommend installing to phone or sd card?

[D/\SH]

thanks for this app. been looking for it like forever.

EDIT: also, do you recommend installing to phone or sd card?

phone for sure i install all my apps to the phone and never to the car.

[TweetyBear]

phone for sure i install all my apps to the phone and never to the car.

ok. i'll trust ya on this one lol. loving this app

[JDMSOHC]

after i erased this off my phone, upon soft reset an error message pops up before phone even fully restores saying that it cant find file "wmwr_cprog", an than i have to hit the LG prada phone button, or goto CommManager and manually turn my phone on now... Wasnt doin this before i erased wmwifirouter, now it is... Whats the deal..?? I've cleared all wmwifi files that i could find on my phone, went into registry searchin around an seems like its all gone, so why is it still lookin for that file..??

[D/\SH]

after i erased this off my phone, upon soft reset an error message pops up before phone even fully restores saying that it cant find file "wmwr_cprog", an than i have to hit the LG prada phone button, or goto CommManager and manually turn my phone on now... Wasnt doin this before i erased wmwifirouter, now it is... Whats the deal..?? I've cleared all wmwifi files that i could find on my phone, went into registry searchin around an seems like its all gone, so why is it still lookin for that file..??

because you didnt erase all the files on the phone. there is still some trace somewhere in the registry program files or the windows folder.

[broSki]

This app is simply wonderful bro, I was using pdanet and left that as soon as I saw this. I got a question tho: I notice my internet sharing opens whenever I connect, is this normal? B/c if i hit disconnect in the internet sharing it just disconnects me from everything.


Also dash, I ws having some trouble configuring some options and I asked jew for help so I found this video on youtube and he describes how to configure everything in the simplest terms, so if you want you can add to 1st post also, wmwifiRouter (http://youtube.com/watch?v=VLTxO7SAkwc)

[TweetyBear]

This app is simply wonderful bro, I was using pdanet and left that as soon as I saw this. I got a question tho: I notice my internet sharing opens whenever I connect, is this normal? B/c if i hit disconnect in the internet sharing it just disconnects me from everything.


Also dash, I ws having some trouble configuring some options and I asked jew for help so I found this video on youtube and he describes how to configure everything in the simplest terms, so if you want you can add to 1st post also, wmwifiRouter (http://youtube.com/watch?v=VLTxO7SAkwc)

wifirouter uses internet sharing so it has to be on. you can't turn it off. hope that helped

[Mandingo]

Loving the app. JUst one more Knife in the Iphone. Still trying to figure out if i can create a secure connection. so that no one else can leech off my phone?

[BiG JeW]

Dont think it is possilbe as i have tried securing with both WEP and other methods. I had no luck ... it tell me when accessing the network from the pc to type the pw or secutity code in and no matter how simple a make the code, the computer doesnt accept it. If anyone knows if a way to secure please let us know.! Thanks!

[BiG JeW]

Dont think it is possible as i have tried securing with both WEP and other methods. I had no luck ... it tell me when accessing the network from the pc to type the pw or security code in and no matter how simple a make the code, the computer doesn't accept it. If anyone knows if a way to secure please let us know.! Thanks!



Sorry for the DOUBLE POST!! Wckediden site told me a had to wait 30sec before posting, I did wait and then it posted twice. PLEASE FORGIVE! LMAO!

[D/\SH]

Dont think it is possible as i have tried securing with both WEP and other methods. I had no luck ... it tell me when accessing the network from the pc to type the pw or security code in and no matter how simple a make the code, the computer doesn't accept it. If anyone knows if a way to secure please let us know.! Thanks!



Sorry for the DOUBLE POST!! Wckediden site told me a had to wait 30sec before posting, I did wait and then it posted twice. PLEASE FORGIVE! LMAO!

lol no problem bro

[broSki]

to secure it just go to setting/connections/Wi-Fi and once your on it, click and hold on the name of your network and hit edit,after it will bring you to a page that says network name and connects to etc.... hit next, on this page is where you will go to where it says data encryption and select the drop down and select WEP, when you select WEP under that just type in the network key you want and hit next then finish and your set.

Now for my question:
in the configure wireless networks page, we have to select only computer-to-computer, but the thing is that selection wont stay like that, when i exit out and use wmwifi and disconnect and then lets say tomorrow i want to use it again, and i open the config wireless networks page again just to check its set at only access points...does this happen to anybody or what?

[TweetyBear]

to secure it just go to setting/connections/Wi-Fi and once your on it, click and hold on the name of your network and hit edit,after it will bring you to a page that says network name and connects to etc.... hit next, on this page is where you will go to where it says data encryption and select the drop down and select WEP, when you select WEP under that just type in the network key you want and hit next then finish and your set.

Now for my question:
in the configure wireless networks page, we have to select only computer-to-computer, but the thing is that selection wont stay like that, when i exit out and use wmwifi and disconnect and then lets say tomorrow i want to use it again, and i open the config wireless networks page again just to check its set at only access points...does this happen to anybody or what?

mine also defaults to only access points even though i put all available. i don't know why either. i'll check it out on all my phones and see if it's true for all

[TweetyBear]

on my other phone with a stock rom it defaults at all available. i don't understand. on my main phone i use kaos rom (best rom ever lol)

[broSki]

on my other phone with a stock rom it defaults at all available. i don't understand. on my main phone i use kaos rom (best rom ever lol)

lol hmmm I wonder whats going on. Ima see and search to see if there is a registry edit.

[BigBadWolf77]

Dont think it is possilbe as i have tried securing with both WEP and other methods. I had no luck ... it tell me when accessing the network from the pc to type the pw or secutity code in and no matter how simple a make the code, the computer doesnt accept it. If anyone knows if a way to secure please let us know.! Thanks!

I believe that for a WEP to work correctly it needs to have 10 digits for 64bit encryption and 26 digits for 128bit encrytion. Your best bet is to have a 10 digit number. I have mine set to 1234554321 that way it is somewhat secure, but also easy enough to give someone else who needs a hotspot. I can also confirm that mine works.

[BiG JeW]

OK thanks for that info Bigbadwolf. you aare probably right. I never inputed a 10 digit character before. thanks for the heads up!

[make-ya-kri]

OMG this app is D/\shit. LOve this, keep up the good work folks. Question will this work with the VX6800 from Verizon?

[BiG JeW]

yes it will make sure you install through the pc on this phone (exe file),,, I dont believe the cab file will install on this model as i have modded one like this out before and had issues with cab, but no issues with the exe file....Press the thanks button.

[Mandingo]

to secure it just go to setting/connections/Wi-Fi and once your on it, click and hold on the name of your network and hit edit,after it will bring you to a page that says network name and connects to etc.... hit next, on this page is where you will go to where it says data encryption and select the drop down and select WEP, when you select WEP under that just type in the network key you want and hit next then finish and your set.

Now for my question:
in the configure wireless networks page, we have to select only computer-to-computer, but the thing is that selection wont stay like that, when i exit out and use wmwifi and disconnect and then lets say tomorrow i want to use it again, and i open the config wireless networks page again just to check its set at only access points...does this happen to anybody or what?



thanks everything works great, also set up the 10 bit encryption like BiGBADWOLF said i just used my phone number like everyone uses for there wireless passcode. works great.

[broSki]

Posted via Mobile Device
yup np bro, glad it worked for you,i also have my phone number aswell to lol

[D/\SH]

Posted via Mobile Device
yup np bro, glad it worked for you,i also have my phone number aswell to lol

lol me too but mine is my number backwords!!!! and bigman that means i know your password!!!!!!

[broSki]

lol me too but mine is my number backwords!!!! and bigman that means i know your password!!!!!!

lol word

[BiG JeW]

Awsome .. I am going to secure mine now... YipPiEE!:groupwave:

[Lopan]

Can anyone verify if WMWifiRouter REQUIRES PAM (Phone as a modem), or does the mo cheap $15 Sprint PCS Vision (Data for phone only) works with this. I sure would like to take my phone bill down a notch.

All I've hear so far is "It should" instead of "it works on my $15 PCS Vision".

I have been using my Sprint Mogul with WMWifiRouter for a few months now and I can tell you that phone gets so hot that the battery overheating protection causes it to stop charging and then drains the battery shortly afterward as a result. This happens on all four of my batteries even the HTC provided one. If I keep a fan on it or in a cool place... no problem.

[D/\SH]

Can anyone verify if WMWifiRouter REQUIRES PAM (Phone as a modem), or does the mo cheap $15 Sprint PCS Vision (Data for phone only) works with this. I sure would like to take my phone bill down a notch.

All I've hear so far is "It should" instead of "it works on my $15 PCS Vision".

I have been using my Sprint Mogul with WMWifiRouter for a few months now and I can tell you that phone gets so hot that the battery overheating protection causes it to stop charging and then drains the battery shortly afterward as a result. This happens on all four of my batteries even the HTC provided one. If I keep a fan on it or in a cool place... no problem.

never had the overheating problem and if you have been using it for months now should you know the 15 dollar plan works? i use that all the time without problems and havent been billed for it yet!!! love it and full always comes off a lil warm but not bad at all and fully charged.

[lalo41]

can u connect your phone to the xbox 360 and used xbox live ?

[D/\SH]

can u connect your phone to the xbox 360 and used xbox live ?

maby it does make a new router but the lag would be ridiculous and wouldnt be enjoyable even.

[Balkar]

Hey, i read the whole thing and i am still wondering if you can install this on the vogue touch... I heard somewhere in some other thread of a Wifi microSD card that could work... I was wondering if something like an external bluetooth wifi antena(kinda like gps but for wifi) existed... I did a few search on google but my googling skills kinda suck 9 out of 10 times...


Thanks

[D/\SH]

Hey, i read the whole thing and i am still wondering if you can install this on the vogue touch... I heard somewhere in some other thread of a Wifi microSD card that could work... I was wondering if something like an external bluetooth wifi antena(kinda like gps but for wifi) existed... I did a few search on google but my googling skills kinda suck 9 out of 10 times...


Thanks

no the only way is wifi card but for the touch users you can use pdanet.

[Mandingo]

I took this progam to the test this weekend. Hooking up my PS3, Computer, and Xbox 360. Haven't found it to over heat. Just got warm. Battery lasted for about 3 or so, with the Wifi is constantly running. Xbox 360 works perfect. I Loged on, Downloaded content, and online play. Same with the PS3. Computer and streaming video works also. Very happy with the program, I'm even considering canceling my Cable internet subscription. As far as extra charges for sprint. i have unlimited data and everything. no xtra charge for turning it in to a modem.

[spidermonkey21]

Works Great. Key works without problems for me. No more need for that cable running from the computer and running into the problem of people not having ActiveSync installed for PDAnet. Thanks D/\SH. In the configuration do you need to select Phone as Modem, or Sprint PCS. Or, do you just simply leave it blank and let it connect however?

[broSki]

Works Great. Key works without problems for me. No more need for that cable running from the computer and running into the problem of people not having ActiveSync installed for PDAnet. Thanks D/\SH. In the configuration do you need to select Phone as Modem, or Sprint PCS. Or, do you just simply leave it blank and let it connect however?

just leave that alone.

[spidermonkey21]

The serial that was originally provided by D/\SH also works for the latest version 1.03

Just tested and working today. I love how it also provides that you can use WEP security.

[broSki]

The serial that was originally provided by D/\SH also works for the latest version 1.03

Just tested and working today. I love how it also provides that you can use WEP security.

yup you can also use wep in this version also, I posted hot to do that a few pages before this one.

[Mandingo]

I'm a strong believer in ...if its not broke don't fix it. what the Difference from V1.01 to V1.03

[broSki]

I'm a strong believer in ...if its not broke don't fix it. what the Difference from V1.01 to V1.03

word, I just search other forums for tht new version and i dont see it, so it means he probably got it from the site which means it isnt hacked.

[Balkar]

no the only way is wifi card but for the touch users you can use pdanet.

Thanks for getting back to me quickly...

But as far as the wifi card is concerned, do you think the card does a similar job when compared to the mogul's built in wifi? Because i do use pdanet but i read in the thread that people seem to exprience a faster speed with wmwifirouter.... I wouldnt mind the swapping card between my microsd storage card and the wifi one...

Thanks

[BiG JeW]

Thanks for getting back to me quickly...

But as far as the wifi card is concerned, do you think the card does a similar job when compared to the mogul's built in wifi? Because i do use pdanet but i read in the thread that people seem to exprience a faster speed with wmwifirouter.... I wouldnt mind the swapping card between my microsd storage card and the wifi one...

Thanks
Has been idscussed before...WifiiRouter is a better then Pdanet. If you have wifi built in or via card or external hardware... this is indeed the best app for using phone to access the internet and tunring the phone into a a router!! :focus:

[spidermonkey21]

word, I just search other forums for tht new version and i dont see it, so it means he probably got it from the site which means it isnt hacked.

As mentioned above in the original post, the modded version is only for if you are having installation issues. In other words, doesn't that mean the modded version does the same functions?


For some users the normal versions do not install correctly.
There are modified versions of the installer below: ActiveSync - CAB
Note that you should only use these modfied installers if you are having installation issues!

[BiG JeW]

As mentioned above in the original post, the modded version is only for if you are having installation issues. In other words, doesn't that mean the modded version does the same functions?
To clarify all the mixup cause I have used the app since the day it was out. I HAVE NOTICED the cab file works and installs with mo issues with sprint carries. THE EXE version via activesync is the app (thats works for all carriers) to use if the cab file doesnt work. The exe is always the best way to go anyway! (personal experiences)

[BigBadWolf77]

*************NEWEST VERSION HERE**************
http://rapidshare.com/files/113063789/WMWifiRouter-1.03.zip.html
Complete with serial
*********************************************

Go ahead and update the original post if you have the ability.

[BiG JeW]

*************NEWEST VERSION HERE**************
http://rapidshare.com/files/113063789/WMWifiRouter-1.03.zip.html
Complete with serial
*********************************************

Go ahead and update the original post if you have the ability.
thanks mas... I will add it to the original post... Thanks!!

[D/\SH]

*************NEWEST VERSION HERE**************
http://rapidshare.com/files/113063789/WMWifiRouter-1.03.zip.html
Complete with serial
*********************************************

Go ahead and update the original post if you have the ability.

could you post a new thread for the updated application please and thanks.

[BiG JeW]

could you post a new thread for the updated application please and thanks.
Will do right now!

[Lopan]

never had the overheating problem and if you have been using it for months now should you know the 15 dollar plan works? i use that all the time without problems and havent been billed for it yet!!! love it and full always comes off a lil warm but not bad at all and fully charged.

I downloaded the newest version of WMWifiRouter and installed No2Chem's Windows Mobile 6.1 5060 ROM yesterday, now all my overheating/battery charge failures are fixed.

And I just terminated my $40 Phone as a modem plan and purchased the $15 Sprint PCS Vision services and it all works like a charm.

Thankyou

[BiG JeW]

I downloaded the newest version of WMWifiRouter and installed No2Chem's Windows Mobile 6.1 5060 ROM yesterday, now all my overheating/battery charge failures are fixed.

And I just terminated my $40 Phone as a modem plan and purchased the $15 Sprint PCS Vision services and it all works like a charm.

Thankyou
WOW ... good to know. we have the new one posted now and i will install it as mine get hot but doesnt overheat. I am sure they fixed some issues... thanks for the heads up!

[bxr84257]

Does this work with the Touch??

[Mandingo]

Lol...your the reason Dash is going crazy....LMAO.....

I got your back on this one Dash.

Dude read the entire thread before posting. that question was asked before.
look at Page 5 of this thread and it will answer your question.

[DARKSTAR21]

After about an hour and a half of learning winrar and how to install programs onto my phone I got this program to work and connect my laptop to it. I gotta say this is a sick program to have. Works awsome and that video really helped to. Damn sprint for trying to charge extra for tethering hahaha
Thanks guys

[D/\SH]

After about an hour and a half of learning winrar and how to install programs onto my phone I got this program to work and connect my laptop to it. I gotta say this is a sick program to have. Works awsome and that video really helped to. Damn sprint for trying to charge extra for tethering hahaha
Thanks guys

no problem enjoy

[BigBadWolf77]

After about an hour and a half of learning winrar and how to install programs onto my phone I got this program to work and connect my laptop to it. I gotta say this is a sick program to have. Works awsome and that video really helped to. Damn sprint for trying to charge extra for tethering hahaha
Thanks guys

You are well on your way to becomming a junkie. Kiss your productive work days goodbye.

[DARKSTAR21]

Damn I think I messed up my settings because it wont send out a signal anymore.
I think because I tried it when it was charging from the usb port to my computer.
I even went ahead an made a new connection from scratch, it keeps trying to dial that sprint 777 :(
any ideas?

[broSki]

Damn I think I messed up my settings because it wont send out a signal anymore.
I think because I tried it when it was charging from the usb port to my computer.
I even went ahead an made a new connection from scratch, it keeps trying to dial that sprint 777 :(
any ideas?

yea go to start/setting/connections/wifi and then go down where you will see a drop down box, hit that and select the option that says only computer to computer and you should be ok

[BigBadWolf77]

Damn I think I messed up my settings because it wont send out a signal anymore.
I think because I tried it when it was charging from the usb port to my computer.
I even went ahead an made a new connection from scratch, it keeps trying to dial that sprint 777 :(
any ideas?

The program makes setting changes as it loads, and then switches them back when it unloads. Under options is crash recovery. Anytime the program doesn't successfully load (ie in your case, internet shareing bugged out because you were tethered) use the recovery to get back to your default settings, then try to reload the program. You can just X this program out either, you gotta use the diconnect and quit buttons.

[JDMSOHC]

ok, so now that i've deleted wmwifirouter off my phone, i get an error message every retart my phone with a popup before the phone even fully restores to the today screen saying "wmwf_config" was not found blablabla.... how the hell do i keep my phone from searching for this file... i've deleted all traces of wmwifirouter on my phone and i still get this error...??

[BigBadWolf77]

ok, so now that i've deleted wmwifirouter off my phone, i get an error message every retart my phone with a popup before the phone even fully restores to the today screen saying "wmwf_config" was not found blablabla.... how the hell do i keep my phone from searching for this file... i've deleted all traces of wmwifirouter on my phone and i still get this error...??

If it is on startup check your startup folder to make sure there is not a link file there, but you will most likely need to pick through your registry to rid yourself of the issue. Did you use the prgoram remover or did you just go in and start deleteing things?

[JDMSOHC]

i always use the programs uninstall option if applicable, otherwise just goto Start/Remove Programs and do it that way... I've searched through the registry again and again and cant find any of the files that are integrated into wmwifi... And I didnt have this issue before the install, after the install i wasnt satisfied because of the lack of communication between phone and psp, so i erased it, soft reset and upon soft reset it had that lil error box popup like a startup file is missing... But there are no wmwifi files anywhere on my phone to be found... Any certain spots in registry maybe to look, or is there a way to just make it not look for the file at all, thats what im after...

[broSki]

i always use the programs uninstall option if applicable, otherwise just goto Start/Remove Programs and do it that way... I've searched through the registry again and again and cant find any of the files that are integrated into wmwifi... And I didnt have this issue before the install, after the install i wasnt satisfied because of the lack of communication between phone and psp, so i erased it, soft reset and upon soft reset it had that lil error box popup like a startup file is missing... But there are no wmwifi files anywhere on my phone to be found... Any certain spots in registry maybe to look, or is there a way to just make it not look for the file at all, thats what im after...

try downloading sktools and run the clean up and the other stuff in there. jew says that will clean up the stuff that doesnt work

[PPCFreak]

SORRY, you must have 5 or more post to post live links....

[PPCFreak]

Rapidshare Link for v1.03 doesn't work.

Seems to be a truncated link. Gives ... before the -1.03 in the rapidshare link.

[D/\SH]

Rapidshare Link for v1.03 doesn't work.

Seems to be a truncated link. Gives ... before the -1.03 in the rapidshare link.

we know we have a new thread with updated link for it try to search for that.

[DARKSTAR21]

Its cool I just redid all the steps and watched that you tube vid but it did take awhile and my email is being all funky and asking me for my password every 5 minutes

[BiG JeW]

Its cool I just redid all the steps and watched that you tube vid but it did take awhile and my email is being all funky and asking me for my password every 5 minutes
Just delte your email account and set it up again... I noticed if you have 2 accounts from gmail. One of them will always ask you for a password. Sometimes it works fine and sometimes it acts up. Try deleting email account and set it up again!

[make-ya-kri]

trying to get my GF's verizon vx6800 to work. I did all the things I was supposed to do.. It says Fatal Error Connection sharing not found what could be the problem. Has anyone established connection with this phone. if so how?

[BiG JeW]

trying to get my GF's verizon vx6800 to work. I did all the things I was supposed to do.. It says Fatal Error Connection sharing not found what could be the problem. Has anyone established connection with this phone. if so how?
Please try the lateset verson 1.03 and fun the exe from the PC.... thats how i got my customers version to work!

[D/\SH]

Please try the lateset verson 1.03 and fun the exe from the PC.... thats how i got my customers version to work!

yeah you could try that i got both version running the the verizon version.

[Sparkhawk]

Can't wait to get this running!!! Thanks D/\sh! The link is bad though.

[BiG JeW]

Can't wait to get this running!!! Thanks D/\sh! The link is bad though.
thanks i will reup shortly..\
\LINK is updated!

[D/\SH]

I have the same problem fatal error. I try all versions (1.01, 1.01i,1.04) with the same problem. But i found the solution for my problem. I unistall the .cab program that i install in my device. then i install the cracked.exe version 1.01i with my laptop via activesync and follow the instructions. i use the same serial txt and now works perfectly until now. Sorry about my bad english and i hope that this reply help someone too.

[buddielee1]

Great App D/\sh, my family is going on vacation, and the house has no internet, wife is a C.P.A. and needs this to check her web site while away, this is the ticket, no problems worked great, thanks again, now I am going to get a Slingbox at what I understand is your old employer?? :brows: if you ever need tax help email me.

[D/\SH]

Great App D/\sh, my family is going on vacation, and the house has no internet, wife is a C.P.A. and needs this to check her web site while away, this is the ticket, no problems worked great, thanks again, now I am going to get a Slingbox at what I understand is your old employer?? :brows: if you ever need tax help email me.

hahahaha word and slingbox and me working for them??????

[buddielee1]

Sorry, I was under the impression that you worked for Best Buy ,My Bad Done

[D/\SH]

Sorry, I was under the impression that you worked for Best Buy ,My Bad Done

hahaha nope not no more that was a while ago...... doing security at a hospital and police officer part time.

[darth cl3ric]

I don't know what i'm doing wrong but i keep getting the license error! Any help will be appreciated. Thanks

[D/\SH]

I don't know what i'm doing wrong but i keep getting the license error! Any help will be appreciated. Thanks

we are aware of the problem.... for some reason some get some dont.... try going back to an older version of the application.

[brown88]

i also am having the problem. i tried going through all and still have the same response.

[D/\SH]

i also am having the problem. i tried going through all and still have the same response.

theres a precracked version jew has let him see this and he will post it up

[brown88]

got it to work and this is what i did. first i watched the youtube video and did all the steps, then on the options tab in wmwifirouter i went to configuration, cellular connection, and chose sprint pcs. oh and in comm manager i went to settings, wireless lan, menu, network cards, and held on my wifi name and chose turn on wifi. hopes that helps. i currently don't know if connecting to sprint pcs will charge me so hopefully someone will find that out.

[D/\SH]

got it to work and this is what i did. first i watched the youtube video and did all the steps, then on the options tab in wmwifirouter i went to configuration, cellular connection, and chose sprint pcs. oh and in comm manager i went to settings, wireless lan, menu, network cards, and held on my wifi name and chose turn on wifi. hopes that helps. i currently don't know if connecting to sprint pcs will charge me so hopefully someone will find that out.

no it will not charge you since your running through the program.

[brown88]

my first time solving a problem instead of asking a question. im gettin good at this.

[thegameksk]

To those of you who have used this for your xbox360s: if you hook your phone up to your 360 via USB cable will it still work? I dont have a wireless card in my 360 and im wondering if this will work. Thanks.

[D/\SH]

To those of you who have used this for your xbox360s: if you hook your phone up to your 360 via USB cable will it still work? I dont have a wireless card in my 360 and im wondering if this will work. Thanks.

yes it does work.

[thegameksk]

The program crashed and now it keeps saying that it doesnt detect a wireless card.I hit crash cleanup, do what it says, and restart but it still wont detect my card. Any ideas??? Thanks,

[D/\SH]

The program crashed and now it keeps saying that it doesnt detect a wireless card.I hit crash cleanup, do what it says, and restart but it still wont detect my card. Any ideas??? Thanks,

you dont need a wireless card on this bro it makes your phone into a router.

[thegameksk]

Somethings going on. When I switch the button on and start the program the routor symbol doent popup in my icons and I get that message.

[D/\SH]

Somethings going on. When I switch the button on and start the program the routor symbol doent popup in my icons and I get that message.

no clue you try a uninstall and reinstall?

[Frankie_Bones]

Okay, I want to make sure my phone is connecting correctly. I can get the programs running and connect to the internet with it. However my phone status says

Sprint PCS
Phone as Modem

instead of
Sprint PCS
Sprint PCS (which is how it is when I use the phone's internet)


is this how the program is supposed to run or is it logging me on as PAM and am I incuring new PAM Charges instead of the regular data that is covered on my unlimited data plan???

This may be a stupid question, but I really want to avoid sprint's extra data charges.
Thanks!!!

[D/\SH]

Okay, I want to make sure my phone is connecting correctly. I can get the programs running and connect to the internet with it. However my phone status says

Sprint PCS
Phone as Modem

instead of
Sprint PCS
Sprint PCS (which is how it is when I use the phone's internet)


is this how the program is supposed to run or is it logging me on as PAM and am I incuring new PAM Charges instead of the regular data that is covered on my unlimited data plan???

This may be a stupid question, but I really want to avoid sprint's extra data charges.
Thanks!!!

no when using you wont be getting charged by sprint

[spidermonkey21]

after trying to install v1.05 and getting no luck, i went back and installed the
"ActiveSync http://rapidshare.com/files/10468348...ter-v1.01i.exe (MODDED VERSION! SEE ABOVE)" from the first post. i figured no big deal, as long as it works. it installed, i re-registered with the original key. works perfectly. checked the about screen and it showed me that i'm on v1.05. not sure if it was just a hang in the registry or what, so i'm not really sure what version im on anymore.

anyways, to make a long post short, i think if you use the ActiveSync http://rapidshare.com/files/10468348...ter-v1.01i.exe (MODDED VERSION! SEE ABOVE), then register the key, it will work perfectly as it is for me now. thanks for the program..

[htc_touch1990]

can i put dis on the touch even tho it dont have wifi

[D/\SH]

can i put dis on the touch even tho it dont have wifi

no it will not work you will have to use pdanet.

[Mike20PR]

why do i get the message that the files cannot be extracted when i run the modded .exe mentioned above??

[D/\SH]

why do i get the message that the files cannot be extracted when i run the modded .exe mentioned above??

not sure bro try to redownload and see what happens if not i will see if i can dig out the file and get you a reup that works.

[Mike20PR]

not sure bro try to redownload and see what happens if not i will see if i can dig out the file and get you a reup that works.

ok thanx bro, lets see if a reup works cuz im tryin to get this back on my mogul cuz it supposely works with serial

[D/\SH]

ok thanx bro, lets see if a reup works cuz im tryin to get this back on my mogul cuz it supposely works with serial

were you using the exe or the cab verison?

[Mike20PR]

were you using the exe or the cab verison?

im trying the modded .exe cuz its the one that its said to work