HTC 6800 Bell phone

[nt1nt1]

I noticed most of the posts that upgrade the ROMS to 6.1 or whatever are mostly American providers like Sprint Alltel etc.

I have a stock HTC 6800 from BELL and do not want to so called brick it.

I do want GPS and REV A enabled but also get the latest ROM you guys have tweaked.. this is why I subscribed it seems you guys were the best in the business for the community.

I simply need not a tutorial because I obviously will search the forums for it but I just need warning steps like...
What loader to use
Do not do this because you are with BELL......
DO this because it is a BELL provider phone.......
Make your PRL this.......
lock or unlock it this way.........
use this loader only...etc

I am just fearful of doing it wrong and bricking it lol..

Thanks guys!:smile_mini2:

[D/\SH]

I noticed most of the posts that upgrade the ROMS to 6.1 or whatever are mostly American providers like Sprint Alltel etc.

I have a stock HTC 6800 from BELL and do not want to so called brick it.

I do want GPS and REV A enabled but also get the latest ROM you guys have tweaked.. this is why I subscribed it seems you guys were the best in the business for the community.

I simply need not a tutorial because I obviously will search the forums for it but I just need warning steps like...
What loader to use
Do not do this because you are with BELL......
DO this because it is a BELL provider phone.......
Make your PRL this.......
lock or unlock it this way.........
use this loader only...etc

I am just fearful of doing it wrong and bricking it lol..

Thanks guys!:smile_mini2:

they work on all CDMA phones bro look in my signature to learn how to flash and follow the steps.

[nt1nt1]

Ok Sooo from what I read so far in your tutorials......

I will follow the Mogul steps of flashing a custom ROM to a stock ROM (I have HTC 6800 BELL)

I heard you (Dash) say the best performing custom ROM so far is Kaos's **** Sprint Custom rom Build 420 Take 2. I'm guessing this will work for BELL as well.

Is there any other ROM you suggest? I simply want the Rev A and GPS and fastest performing operating system with the least bugs. I will try your Internet tweak thing after but yeahh.....for now I want to basically go with the most stable.

My ROM and radio version are: ROM v 2.13.666.0 Radio v 1.37.00

I will hard reset before I flash it.

Please reply before I Flash thanks

[D/\SH]

Ok Sooo from what I read so far in your tutorials......

I will follow the Mogul steps of flashing a custom ROM to a stock ROM (I have HTC 6800 BELL)

I heard you (Dash) say the best performing custom ROM so far is Kaos's **** Sprint Custom rom Build 420 Take 2. I'm guessing this will work for BELL as well.

Is there any other ROM you suggest? I simply want the Rev A and GPS and fastest performing operating system with the least bugs. I will try your Internet tweak thing after but yeahh.....for now I want to basically go with the most stable.

My ROM and radio version are: ROM v 2.13.666.0 Radio v 1.37.00

I will hard reset before I flash it.

Please reply before I Flash thanks

yes go with kaos's rom since mine isnt released and have decided to keep it for jsut my customers for the mod service i offer.

[nt1nt1]

The hard SPL says in the DOS window to disconnect and reconnect when in 3 color screen but then it asks to disconnect and reconnect again.

The updater screen pops up but the checklist says to make sure you are connected to ativesync. There is no connection it just says not connected. Can I still run the updater?

Or just run the romupdateutility.exe file from the RUU and do not touch anything on the updater screen?

[D/\SH]

The hard SPL says in the DOS window to disconnect and reconnect when in 3 color screen but then it asks to disconnect and reconnect again.

The updater screen pops up but the checklist says to make sure you are connected to ativesync. There is no connection it just says not connected. Can I still run the updater?

Or just run the romupdateutility.exe file from the RUU and do not touch anything on the updater screen?

read the tutorial my god it has been discussed sooooo many times and search before posting!!!!! it clearly states that if the screen says usb you are still connected to activesync.

[nt1nt1]

Ok I'm stuck on the red green blue screen. I seem to have run the updater but it went too fast so I know it did not load the file.

I think I had the double click on the ROMUpdateUtility.exe in the folder to run the updater not use the updater that just popped up.

How do I get out of this screen as a locker or hard reboot will not work anymore. ... thanks for help btw Im sure I will get through this.

[nt1nt1]

I ran the updater and it went quick I dont think it was pointing to the file. I guesss I didnt double click on the ROMUpdateUtility.exe in the RUU folder.

So now Im stuck on that screen and trying to connect with the unlocker and sometimes get connected but it will not load the new ROM it gets an error saying check your connection when it says USB

[D/\SH]

I ran the updater and it went quick I dont think it was pointing to the file. I guesss I didnt double click on the ROMUpdateUtility.exe in the RUU folder.

So now Im stuck on that screen and trying to connect with the unlocker and sometimes get connected but it will not load the new ROM it gets an error saying check your connection when it says USB

wow give us time to answer and searh for heavens sake both have been discussed before if at the spash screen you need to flash the 3.35 radio on there since you didnt follwo the steps and flash the sprint 3.35 rom first and if in bootloader as long as it says usb you will be fine to flash it over and you must unlock it so make sure you do that before flashing 6.1 alook at my signature for details.

[nt1nt1]

RED GREEN BLUE SCREEN will not go away. Do I lock or unlock now please help. I did read your tutorial but it was not that specific on what the screen should say before updating. sorry please help

[D/\SH]

RED GREEN BLUE SCREEN will not go away. Do I lock or unlock now please help. I did read your tutorial but it was not that specific on what the screen should say before updating. sorry please help

what did i jsut say you have toe flash a god damn mother ****ing rom onto the god damn mother ****ing phone. Read my god damn tutorial and as it says if it says usb go and flash and folloow the step for step!!! and yes im pissed since this has been discussed to hell and go ahead flame on me for getting pissed and see what happens.

[nt1nt1]

I am very sorry. I will work on it
Going to use the locker and run the 3.35 rom

[nt1nt1]

OK I am getting an error on the update utility saying error 264 connection .... check usb

[D/\SH]

OK I am getting an error on the update utility saying error 264 connection .... check usb

sorry bout that had to vent and all but gets titing answering shit over and over trust me your not the first and not the last and i apologize. just need more staff and get some of the weight off of my shoulders........ but if it is still saying that have you tried to flash back to the stock rom to see if you can at least get that back on there so you can start all over????? you might not have unlocked correctly. try that and let us know how it goes.

[nt1nt1]

Ok I was able to load the Kaos rom but now stuck on the guy holding up middle finger on the screen. It does nothing. I know you said go to the old version but is not possible I kept getting could not connect. So now I am trying to put the RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4 350H_SPCS_AM_Ship.exe and stuck on verifying information on PDA phone

[BiG JeW]

Ok I was able to load the Kaos rom but now stuck on the guy holding up middle finger on the screen. It does nothing. I know you said go to the old version but is not possible I kept getting could not connect. So now I am trying to put the RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4 350H_SPCS_AM_Ship.exe and it will not find a connection when searching for PDA settings.
OK poot the phone in boot loader mode... hold the camera and power button down and hit the soft reset key then you will get the rainbow screen. RUN the olpiro unlocker 2.40 then once done.. Get back in bottloader mode then flash to Kaos Rom and follow all the instructions there. PLEASE MAKE SURE YOU HAVE 3.35 radio before flashing to KAOS ROM....

[nt1nt1]

I was able to load a DCD ROM its supposed to be BELL I also had the SPRINT 3.5 on there. Both had issues with data but calls were working. BELL seems to have an issue with their latest patch with connecting to Internet. How do I get the original ROM again or something that BELL users have because I def need Internet lol.

PS I did get the PRL info set in the device... XDAdevelopers had it.

[D/\SH]

I was able to load a DCD ROM its supposed to be BELL I also had the SPRINT 3.5 on there. Both had issues with data but calls were working. BELL seems to have an issue with their latest patch with connecting to Internet. How do I get the original ROM again or something that BELL users have because I def need Internet lol.

PS I did get the PRL info set in the device... XDAdevelopers had it.

you need to run the iota cab in the expanded memory to get he net on the kaos and most likely the dcd rom too.

[nt1nt1]

IOTA CAB?

I did alot of research and it seems that I need the A-Key as it is erased or written over when I loaded the Sprint ROM.

Alot of stuff was written over in the MSL settings lol

I read that if you go back to the Stock BELL ROM you will get all that back. (Not the recent update in April that fixes BT Radio etc.) Yes the full starting ROM . BIG question..... How can I get this start new ROM?

Also I did not see any real good instructions on how to use the unlocker and locker. I flashed as soon as the unlocker said something about SP ram .... What do they do?

[D/\SH]

IOTA CAB?

I did alot of research and it seems that I need the A-Key as it is erased or written over when I loaded the Sprint ROM.

Alot of stuff was written over in the MSL settings lol

I read that if you go back to the Stock BELL ROM you will get all that back. (Not the recent update in April that fixes BT Radio etc.) Yes the full starting ROM . BIG question..... How can I get this start new ROM?

Also I did not see any real good instructions on how to use the unlocker and locker. I flashed as soon as the unlocker said something about SP ram .... What do they do?

all you do is run the unlocker and follow the steps not hard and the rom can be found here and at the htc site.

[nt1nt1]

I now know what the unlocker does have not done the locker but I assume it is for stock roms.

I now have Kaos' F Sprint ROM intalled. I do not see the IOTA cab...

Please tell me where is this ROM I do a search here and on the site. I'm blind please link me if you have time........:connie_mini_hotairb

[D/\SH]

I now know what the unlocker does have not done the locker but I assume it is for stock roms.

I now have Kaos' F Sprint ROM intalled. I do not see the IOTA cab...

Please tell me where is this ROM I do a search here and on the site. I'm blind please link me if you have time........:connie_mini_hotairb

you needed to flash to the 3.35 rom first and than it is in the extended rom!!!!!!!!!! please follow the steps in my signature it lays it out step by step and clearly for you..... please read forst or i will close this thread.

[nt1nt1]

I did install the Sprint 3.5 then kaos.....

I found iota ... :viannen_65:ran it rebooted still no connection to Internet with Bell...

I also have not found the stock ROM for bell htc6800..

Hey Im getting better at it ....and thanks thus far

[D/\SH]

I did install the Sprint 3.5 then kaos.....

I found iota ... :viannen_65:ran it rebooted still no connection to Internet with Bell...

I also have not found the stock ROM for bell htc6800..

Hey Im getting better at it ....and thanks thus far

you should be getting net i have done bell phones before..... go to start.settings/connections/connections/internet/start or get

[nt1nt1]

Connections icon .... you mean..... no go on the regular config

http://www.htcwiki.com/thread/1439477/Data+connection+problem+after+flashing+ROM

This guy sounds like he experiences the same thing.....

I need the original rom to copy down the original A-key etc.....

This site does not have ... no?

[D/\SH]

Connections icon .... you mean..... no go on the regular config

http://www.htcwiki.com/thread/1439477/Data+connection+problem+after+flashing+ROM

This guy sounds like he experiences the same thing.....

I need the original rom to copy down the original A-key etc.....

This site does not have ... no?

we have the original rom but not the file search google and you may be able to find especially if someone has dumped the rom already.

[goku48532]

has any completely broken they're phone with a rom?

[D/\SH]

has any completely broken they're phone with a rom?

almost impossible to do but can be done.

[nt1nt1]

No luck on finding this BELL 6800 stock ROM. Sooo close to find but it is either BELL Vogue.... Alltel Titan.... lol

Anyone out there have it please PM ME!

[D/\SH]

No luck on finding this BELL 6800 stock ROM. Sooo close to find but it is either BELL Vogue.... Alltel Titan.... lol

Anyone out there have it please PM ME!

its stock go to htc.com

[nt1nt1]

That was the second site I went to lol

I literally checked the usual places but nada

[D/\SH]

That was the second site I went to lol

I literally checked the usual places but nada

all i did was search bell and found this bro. https://www.wckediden.com/showthread.php?t=157600&highlight=bell

[nt1nt1]

That was a good find ............. now only if I can find the same thing for the HTC 6800 instead of the Touch .... lolz

[D/\SH]

That was a good find ............. now only if I can find the same thing for the HTC 6800 instead of the Touch .... lolz

i dont think they have came out with an update so might not be possible .... will have to search google to see if you can find that rom or the file.

[nt1nt1]

Yeah I wasn't looking for the update. I wanted the old original version.

Rumors say that there will be an update to fix the last update they had that screwed up alot of Bell users data connectivity. I hope this new update will fix my issue as well.

[nt1nt1]

Do you think if I go to my MSL settings ##778#...MSL enter..... If there is a setting I can put in there?

How can I get my A Key? Anything I need in there to authenticate with bell when trying to get my data back on my phone?

[D/\SH]

Do you think if I go to my MSL settings ##778#...MSL enter..... If there is a setting I can put in there?

How can I get my A Key? Anything I need in there to authenticate with bell when trying to get my data back on my phone?

doubt it bro im not really familiar with the bell service provider so truthfully couldnt tell you there.