US Cellular PPC 6800
 

OK I tried unlocking my phone with the unlock program and now all I get is a a red, green, blue and white screen. Hard reset won't even fix it. I'm pissed and need help to get my phone back. My life was in this thing... HELP!!!!! What can I do?????

Re: US Cellular PPC 6800
 

What unlocker did you use? If you used the wrong one you may have bricked your phone.

Re: US Cellular PPC 6800
 

I used the Hard-spl-mfg. The one found in your sig. https://www.wckediden.com/show...titan+unlocker.
I found the hard reset and tried that. Guess what? Didn't work. I'm screwed aren't I?

Re: US Cellular PPC 6800
 

What happened when you ran the unlocker? Did the progress bar show up and complete? Where did you get the unlocker? What does the text say on the screen when you have your phone on?

Re: US Cellular PPC 6800
 

I ran it and eneded up with the screen I stated earlier. It says

Left side Right Side top

TITA100 RUUNBH
SPL-2.40.01ipro
CPLD-9

Bottom Middle

Serial

Re: US Cellular PPC 6800
 

Ok, which ROM are you gonna try to flash? Unplug the usb and plug it back in and see if the "serial" changes to USB.

Re: US Cellular PPC 6800
 

Well it won't connect anymore to active sync. Now what? And thanks for your help so far....

It does say usb at the bottom of the screen tho.

Re: US Cellular PPC 6800
 

Ok, as long as it says usb at the bottom, you are connected to activsync. So continue with the flashing process. Do you have a blank RUU and the ROMs nbh file yet?

Re: US Cellular PPC 6800
 

No all I have is the one file. What else will I need? Not sure what I am doing so all help would be great.

Re: US Cellular PPC 6800
 

What file do you have? Did you select a ROM yet?

Re: US Cellular PPC 6800
 

https://www.wckediden.com/attachment...0&d=1227301398
click that and download the RUU

Re: US Cellular PPC 6800
 

I have no rom and the file I have is the one that says it unlocks the phone?

I have been trying to get it to hook to active sync and I won't...

Re: US Cellular PPC 6800
 

It wont say its connected on your comp, but as long as it says USB on the bottom, you ARE connected. You need to download a ROM that is US Cellular compatible and the RUU from the link I posted above.

Re: US Cellular PPC 6800
 

Ok, I got the one you and the link for. Now where do I find a US cell one?

Re: US Cellular PPC 6800
 

OK, go here and download this
Just download it, then place it in the RUU that you just downloaded and choose to overwrite when prompted. After that run the RomUpdateUtility. Follow the onscreen prompts and let it do its thing. After its done, the phone will reset, you have to follow some more onscreen prompts, when your phone says "will perform customization in 3 sec....2 sec..."(it will be counting down), do a soft reset, just dont let it countdown and start. Then you need to install a US Cellular cab

Re: US Cellular PPC 6800
 

OK, no matter what I try it won't find my phone. Am I doing something wrong? What order do I run this stuff and what files. Sorry for all the questions, kind of in a panic here.

Oh, and happy new year and thanks a again and again... You the man..

Re: US Cellular PPC 6800
 

Dude, I told you, it will NOT say your connected on your comp. As long as it says USB on your phone, you ARE connected. Did you download the ROM yet?

Re: US Cellular PPC 6800
 

Just got it all downloaded and starting. Will let you know what happens.

--------- New Post Merged on 31/12/2008 at 10:50:57 --------

Where do I get a US Cell Cab?

--------- New Post Merged on 31/12/2008 at 10:59:42 --------

Ok, it did it's thing and now it is sitting on the htc start screen? Is that good? How long will it take before I get the countdown?

Re: US Cellular PPC 6800
 

If its stuch at the start screen, it sounds like you have an old radio. What does it say when you start your phone next to the red R:

Re: US Cellular PPC 6800
 

1.64.00 is that old?

Re: US Cellular PPC 6800
 

Download this tell me when its done.

Re: US Cellular PPC 6800
 

Hey, where you running WM 6.1 or were you still on 6.0?

Re: US Cellular PPC 6800
 

Well, I gotta go to bed, I got work tomorow. If this doesnt work, I'm pretty sure that you can flash Kaos Take 2 and it will work. You just have to put your phone into bootloader mode manually. We have a very helpfull staff and I'm sure if/when anyone of them see this they will chime in and help you and/or correct any mistakes I may have made or include steps I might have forgotten.

Re: US Cellular PPC 6800
 

I am pretty sure sure I am still 6.0. Good ole US cellular. I will do what I can butg zI am sure I will have more questions tomorrow.
Happy New year and don't work to hard.

Re: US Cellular PPC 6800
 

If your still 6.0, I would recommend flashing to your stock 6.1 rom, then try flashing a custom rom. Just follow the instructions for flashing stock from custom in the Flashing guide.

Re: US Cellular PPC 6800
 

OK, and where do I get the stock ROM at and will it flash even tho my phone won't show connected on the phone?

Re: US Cellular PPC 6800
 

try this, its the newest as far as i know for your phone, hope it works outafter downloading, click and run the file, no ruu needed, just make sure battery is more than 50%, and usb is connectied to phone and computer

Re: US Cellular PPC 6800
 

Youll prolly have to put the phone into bootloader (tri-colored screen) manually, then flash it. remember, as long as it says usb and not serial, you are connected.

Re: US Cellular PPC 6800
 

And I how do I get it into bootloader mode? Sorry I am such a pain in the but..

Re: US Cellular PPC 6800
 

Lol, dude I better be gettin like 50 thanks from you in this thread:) Press and hold the camera and power button the soft reset. That should take you to the bootloader screen.

Re: US Cellular PPC 6800
 

Once ur in bootloader run the update utility tool thing in the file from ur pc and u should be good to go. As long as it says USB in the bootloader flashing will go easily. Lol but first upgrade ur radio then do the above

Re: US Cellular PPC 6800
 

He is upgrading his radio by flashing the latest stock setup, and what do you mean "then do the above"?

Re: US Cellular PPC 6800
 

Ok, it is loading now. What do I do again after it is done?

Sorry, a bit hungover from last night and my mind is a bit fuzzy..

Re: US Cellular PPC 6800
 

Which one is loading> The stocker?

Re: US Cellular PPC 6800
 

This is the one I just installed..

Re: US Cellular PPC 6800
 

yea thats the stock one. when it is done, tell me if u can use your phone again

Re: US Cellular PPC 6800
 

Everything seems to be working fine on my phone now. Do i need to do anything else? How do I get the GPS to work?

Re: US Cellular PPC 6800
 

Ok, now your radio should also be updated, do a soft reset and tell me whats next to the red R now

Re: US Cellular PPC 6800
 

3.42.50 is what it says now. You are definitely a SUPERman. Thanks a million for all your help so far.
You have made it a happy new year for me and my girlfriend. She was more pissed than I was.

Re: US Cellular PPC 6800
 

Ok bro your good to go now. Just act like none of this happened and flash the custom ROM again following the flashing rules and youll be set. No stuck at splash screen for you this time around!! :)