![]() |
After Flash, Stuck in Reset Loop
I flashed to the 6.1 rom from the leaked rev a rom, I unlocked the phone, and flashed, it makes it to the align screen screen, and then it resets, and starts all over, I have reflashed with the same, rom and every other available rom including the stock rom and the leaked rom. Its all the same. just a reset loop I have hard reset and pulled the battery after every flash, the flashes seem to work correctly just in a rest loop .:Flush:
|
Re: After Flash, Stuck in Reset Loop
Quote:
|
Re: After Flash, Stuck in Reset Loop
BUMP!!!!! i looked into this some more the reason for the loop on resets is because of wrong bootloader on the phone. if you have a stock sprint rom including the rev a leak rom you will have to have the bootloader in 2.06. ( im pretty sure if not very close) and for custom roms like 6.1 you will need to have bootloader olipro 2.40. tell me what rom you are running and what the bootloader version is. you can get it to go manually into bootloader by pressing and holding the power and camera button while reseting with the stylus.
|
Re: After Flash, Stuck in Reset Loop
Ok here is the low down, I started with a fresh phone out of the box, I upgraded to the leaked rom (rev a) on the stock bootloader, I was not happy with that because the performance was poop, and the gps didnt work. I decided to read, read, read and learned how to do another flash with a custom rom this time it was no2chem 5051 and I did it yesterday, with an unlocked spl 1.10 it went into reset loop, I flashed to all other avail. roms with no luck, I successfully flashed back to 2.17 today, its choppy but its not resetting at least not yet. I didnt relock I simply flashed to olipro 2.40, then flashed to no2chem 5048 and back into the reset, loop. I am stuck I am back to 2.17 (stock sprint, what am I missing. I could have sworn I did everything to perfect.
|
Re: After Flash, Stuck in Reset Loop
you need to use spl 2.40 not 1.10.also 4051 has major bugs i suggest 48
|
Re: After Flash, Stuck in Reset Loop
Quote:
|
Re: After Flash, Stuck in Reset Loop
Quote:
|
Re: After Flash, Stuck in Reset Loop
When I enter bootloader (via the cam, and power buttons during soft reset.) it shows reads
"TITA100 MFG SPL-2.40.Olipro CPLD-9" When I softreset to get out of bootloader, it will boot into wm6 stock rom (ver 2.17) in the about screen it reads "CE OS 5.2.1238 (Build 17745.0.2.3)" Under device information it reads "ROM Version 2.17.651.0 ROM Date 11/18/07 Radio Version 1.47.01" Where am I? where do I go from here? I am confused now LOL. Guys I really appreciate the help. |
Re: After Flash, Stuck in Reset Loop
Quote:
|
Re: After Flash, Stuck in Reset Loop
Quote:
I have no2chem build 5048 - 5051 I have the stock 2.17 I have the dcd rom, I have the leaked rom. I both olipro unlockers 1.10 & 2.40 I have the exitbootloader I have the Relocker. I just need to know what order I have to use them in now, as I said I am at: Sprint stock Rom 2.17 Radio 1.47 Locked 1.06/7 bootloader. Thanks guys. I do feel a little accomplished, I beleive I have stumped the D/\sh LOL I don't know how I got that first rom with that bootloader either but I did LOL |
Re: After Flash, Stuck in Reset Loop
3.16 will give you connection errors...you have to follow the recovery steps just dont give up it will flash...it resets alot during install as well....the connection error appears at 11% follow the recover steps...then it will start again at 11% and finish.....so leave locked flash 3.16 sprint leak......after it takes then unlock and do no2chems 48 if thats what you want...
|
Re: After Flash, Stuck in Reset Loop
Ok I got it to take the leaked rom, do I STILL leave it locked to flash from the leak to 5048? or do I unlock before i go to 5048, if i need to unlock, do i use olipro 1.10 or olipro 2.40 to unlock?
|
Re: After Flash, Stuck in Reset Loop
the official rom is out now....I posted it look under windows appz....you can leave it locked for that....Im running it right now...its still wm6.0 but seems so much more stable..as well as a totally new radio.
|
Re: After Flash, Stuck in Reset Loop
Sorry To be such a PITA, but I really want 6.1 with the threaded sms and working GPS. I am hung up installing the leaked rom and ive flashed now 9 times and it still restarts and disconnects at 11%
|
Re: After Flash, Stuck in Reset Loop
Quote:
|
Re: After Flash, Stuck in Reset Loop
Success!!!! Finally a week has paid off. Im now running 6.1 (5048) with gps (i hope) and sms threader.! just one last detail, can someone figure out a regedit to enable the REPEAT function in the phone and text message notification found in Start>Setting>Sounds & Notifications>Notifications. So it will act like a regular phone so when I miss and call or msg it reminds me every 2-3 minutes?
|
Re: After Flash, Stuck in Reset Loop
Quote:
|
| All times are GMT -4. The time now is 10:54 AM. |
Powered by vBulletin® Version 3.8.14
Copyright ©2000 - 2026, vBulletin Solutions Inc. And Powered By phillyfinestserverstat a AI movement.
POWERED BY PHILLYFINESTSERVERSTAT FOR WCKEDIDEN|- NEXTELELITE| - PPCTHEME| - IDENINSIDER