Garmin Mobile XT for WindowsMobile V42020wp
 

Garmin Mobile XT for WindowsMobile V4.20.20wp
Requirements: Windows Mobile 2003/SE/WM5/WM6 PocketPs with GPS receiver
Overview: Add full-featured navigation to your GPS-enabled smartphone with Garmin Mobile XT. Just plug this data card into your compatible phone¹ (see specs tab) and start navigating. With no monthly fees, preloaded maps, turn-by-turn directions, real-time services and only $99, this easy-to-use data card has everything you need to navigate to the front door.
Image Image

Changes made from version 4.10.40w to 4.20.20w:

Provide EULA dialog and accept choice before installation of the application.
Provide support for Brazilian Portuguese text display.
Provide support for version 1.60 of the QueAPI.
Provide support for Afrikaans language.
Provide additional gain for European and Brazilian Portuguese voice output.
Provide text updates for Brazilian Portuguese.
Update the backlight override setting for 'On While Routing' to include staying on while a route calculation is pending.
Update various translations for Slovenian, Spanish, Swedish and Turkish.
Update Mexican food category to Spanish/Mexican food category.
Update the display color of parks and water on the maps at night.
Correct display of Custom POIs within Tools -> Manage My Data -> Custom POI Sets when the file is saved on the storage card.
Correct a rare error that could cause the application to shutdown when downloading maps from MapSource.
Correct display for MapSource communication if the application is running in background mode.
Correct a rare error that could cancel a route calculation if two route calculations occur back-to-back quickly.
Correct a rare error that could cause the command bar to not be redisplayed when the application was not exited normally.
Correct default measurement settings for England.
Correct the non-display of a Garmin Online service if a service is not supported.
Correct the safety camera display of some unique camera points.
Correct the display of the north arrow on VGA devices.
Correct the display of direction indicators for the GPS Info page on VGA devices.
Correct a rare error that could cause the application to shutdown when a Contact contained specific information.
Correct a text display error that caused some letters to be clipped at the bottom edges.
Correct the display of traffic data for users in France.
Correct a rare error that could cause the application to shutdown if a turn preview window closes before showing the route recalculation message.
Correct the About page text that was being cutoff in some text languages.
Correct voice instructions to always speak all words ? some WM6 devices were skipping every other word.
Correct display of buttons, list items and message boxes for WQVA screens.

More Info:
Code:
http://www8.garmin.com/support/colle...t=010-00579-00

Download Instructions: All credits for the keygen go to JetMouse, as well as Lord Yuz and starix who helped with the creation of the keygen.
Code:
Installation procedure:

a) Start installation of 'GarminMobileXTforWindowsMobile_42020w.exe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_4xxxx.exe' for voice files. In storage card
c) Install 'GarminMobileXTFreeBasemap_4xxxx.exe' for Garmin's base map. In storage card
d) Run GarminMobileXT and click "Connect to a Garmin GPS" go to 'setting\about' record the Unit ID and use keygen to create unlock key.
e) Save as sw.nl file.
f) Copy 'sw.unl' to '\Storage Card\Garmin'.


Rapidshare: http://rapidshare.com/files/21331591..._mobile_xt.rar
4Share: http://www.4shared.com/file/39850879...mobile_xt.html

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Is this like the same version thats stickied? Does this work with internal GPS?

Thanks

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

no its not look at the build number

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

i test ran this and it is working well i must say props dash and the AUTHOR...lol

but i have to figure out about local city map. I will research more..if any body can assist that would be great.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

thanks for the test bro i was going to test for you guys today and this one seems a lil more stable than the last.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

You are not authorized to post any spam link (You need 5 or more post to post a link)

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

you should be fine to post a link now since you have 5 posts... we do that to cut back on people spamming.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Hi Dash -- I've two quick questions for you:

1) Is Unit ID the same as Device ID or Card ID (will be installing to card)?
2) I've experimented a little with the keygen and don't see where to save as "sw.nl' -- am I to create this as a text file from scratch, and if so, can you show me what its contents should look like?

Thanks - your efforts are appreciated.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

actually that was a typo you have to save it to sw.unl and put it in your garmin directory in your storage card .then take the card out wait 2 sec then do a soft reset. and boom you are set. to go

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Hi wcked - typo affirmed. Thanks.

How is sw.unl created and what should its contents look like?

When navigating to Garmin's settings/about to get a Unit ID for the keygen utility, do I use the Device ID or Card ID as the Unit ID? <whew!>

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

the way i did it was open you notepad copy and paste the serial to the notepad the save as"sw.unl", now go to your active synce open explore look for storage card then once you find garmin folder just put that sw.unl file inside the garmin folder...ok then you take the card out wait 2 sec then put it back in after that do a soft reset and you are good to go.also what you will be lookin for is unit id

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Well, so far no errors. Will not be going out until the morning, but will let you know how I make out.

What about the City Navigator North America NT 2008 key that I generated?

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Yeah, btw thanks coder for the info about that keygen... Also, my question earlier was how to i get the north american maps... do i get them on official garmin site or i get them off any torrent site...

Thanks

Balkar

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

torrent site will work we had smeone upload the files but you have to be a premium member and all to get to them so he is going to reupload the files soon i hope.... he has all of north america..

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Alright, me again, maybe a stupid question but i'm new to those thing especially that *UNL file...

How do i create it exactly... I open notepad, copy the keygen, hit save and as the file name i did put sw.unl and saved it. Now i get a file when i look in explorer that is called sw.unl.txt

Is that the right thing to do or i am doing it wrong

Thanks

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

yes because a word document saves as a .txt which stands for text file.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

You now need to rename sw.unl.txt to sw.unl

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

remove the .txt and leave it as sw.unl so it should be sw.unl not sw.unl.txt

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Ok, I got this working so from the bottom of my heart to you 3, mark, wcked and dash, Thanks a WHOLE lot! I've been looking for this for like 3 months until i found this site... I'll refer all i can to here, this seems like a really great community!

Again, thanks! O and hitted all those thanks button :P

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

I'll try to get a sucessful signal with my gps and i'll keep you gyuys updated with com port or other stuff...

Well actually, before i try this, do you know if its possible to sync a bluetooth gps and a htc touch with this software or it has to be a phone with a built in GPS absolutly...

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

I signed up for a 2 month premium for megaupload so ppl can pull off maps of the US. The login and pass are in the other thread as well.

Login: Will7272
Pass: sprintpcs

Hope this helps.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Wait...i don't get it. Now what exactly do i put in for Unit ID in keygen? All I see in "about" is Device ID and Card ID...

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

are you serious bro??? we just went through the whole thing in this thread nasd also in the read-me.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

thansk for this. this is for the american maps fo rthose that dont know. Go to this site and follow the instructions given.
http://jinxinlove.blogspot.com/2007/...on-garmin.html

I used the above linked app to get Garmin Mobile XT installed. You may have a different method or already have the program. If so, proceed to the next 2 downloads.
GARMIN1.rar (762.94 MB)
http://www.megaupload.com/?d=MI6L7MMT
GARMIN2.rar (677.81 MB)
http://www.megaupload.com/?d=A37R1CN9

Download the files from the links above and install the program. Install on PC only. This will install City Navigator North America 2008 nonNT.

Once you install, use the appropriate registry entry for your operating system before you launch the program. Connect Mogul using activesync. Once connected, launch the program you installed (MapSource). Click on Utilities and get your Unit ID. You will need to use this with your keygen. Launch the Keygen. Enter your Unit ID in space provided and click generate to get your GM XT device unlock code. On same keygen screen, look for Select Map Product. Scroll down and select custom map set. A small window will open asking you to input the Map ID code. Enter 243 in this field. This will unlock the detailed maps for the US and I believe Canada. Scroll or pan around to where you want to have detailed maps. Once you select or highlight an area, hit the send to device button and you're good to go. If you have any questions or problems, I'll do what I can to help. I have tested and use this on my Mogul and it works flawlessly.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

thanks dash i had downloaded 15 files and the 12 file was corrupted i will try this one now...and get back to you guys

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Dead serious. i saw the question asked. i saw WHAT to do with the keygen generated key, and i get all that. But I don't see WHAT to put into keygen as the Unit ID in the first place. And I don't see a "read-me".

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

These files shouldn't be corrupt but in the case that 1 or 2 of them are, I have a par set that will repair them. I'll keep checking to see how everybody is doing.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

This URL doesn't seem valid. The "..." in the URL is the same in the actual shortcut - if you hover your mouse over that link, the URL doesn't expand, it includes the "...". Take a look at the webpage's source. http://www.anonym.to/?http://jinxinlove.blogspot.com is valid, though, but don't know where to go from there.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Try this one.

http://jinxinlove.blogspot.com/2007/...on-garmin.html

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Ah, the missing link! Thanks, Will7272. I had no problem installing the latest Garmin Mobile XT (v4.20.20wp), but thought that your two RAR files would provide me with the detailed US maps I had (incorrectly?) presumed to be missing. The above jinxinlove link doesn't shed any light as to what to do with the Mapsource you provided (and I successfully installed onto my PC). How do I get it to my phones card? BTW, jinx' files are of an older version of the Garmin Mobile XT software.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

i wasn't talking about the mega files that was corrupted. It was a set of 15 files that i had to download from another site and the 12th rar files was corrupted, so i will download that dash posted and see how it work out

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Connect your device using activesync.
Run Mapsource.
Click on Utilities---->Get Unit ID
Once you get your Unit ID, place it in the top line of the Keygen.
Get your GM XT Device Unlock Code and copy to cliwckedoard.
Go to Utilities and paste that 25 digit code into Mapsource.
On same keygen screen, look for Select Map Product.
Scroll down and select custom map set. A small window will open asking you to input the Map ID code.
Enter 243 in this field.
Get the map unlock code and enter that 25 digit code into Mapsource the same way you did your GM XT Device Unlock Code
This will unlock the detailed maps for the US and I believe Canada. Scroll or pan around to where you want to have detailed maps. Once you select or highlight an area, hit the send to device button and you're good to go. If you have any questions or problems, I'll do what I can to help. I have tested and use this on my Mogul and it works flawlessly.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

I am never prompted for a Map ID code, so I can not enter 243 in this field. After getting my GM XT unlock code, etc., I select the map product City Navigator North America NT 2008, but no window opens. I only have the option to generate a key. FWIW, I am using keygen v1.3.

Update: I was choosing the complete North America map product and didn't select custom. Will try again. Thanks.

2nd Update: Not mentioned was whether to register the product -- in all cases, I opted not to. Anyway, I selected the lower portion of Canada and all of the continental U.S., clicked on the send to device button, and received an error, asking that I copy the log and send it to Garmin (which I didn't). The log is attached.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Make sure you select Custom Map Set. I've never used Mapsource until I downloaded it. Play around with it and you'll get it working exactly the way you want.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Hey dash, those 2 last links, i guess they are the maps right? I can only download the second one for some reason... first one was deleted, were they boh the same thing? Also, will they install with the version you gave us the link to in this thread(The first post :P)

Thanks

Balkar

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Yes. This program is the Mapsource program you'll need to get US maps. It will allow you to unlock maps in V4.20.20wp as well as the older version V4.10.40w. I just checked the first link and the download worked for me. Try checking again.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

I never selected the entire continental US. I did the entire east coast and some of the mid US. Try selecting a smaller area to test or break the areas up that you want to transfer. Also, make sure that you use the correct registry file for mapsource for either XP or Vista. That may cause an error if not done.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

lol..i feel like a noob map source install... having trouble setting maps east side to mobile.

there should be a detail tutorial on it..:Flush:

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

But are the first and second file the same thing? Or do i need both? Sorry i have a slow connection lol downloading at 60kb

Thanks

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

You need both

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

There is a map select tool near the toolbar. It's shaped like a polygon. Mine is located right under the help menu. Select that tool then select the state in which you live in. Send those files over to phone. Run Garmin on phone with GPS signal to test. It should work. I've done it on 4 phones so far and no probs.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

thanks for all the help bro you got this down lol.... 4 phones!!! very nice at least someone is getting use out of these apps besides me.... i was using garmin for a couple weeks before anyones decided to give it a shot lol..... keep up the great work.

Thanks:
D/\SH

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

I used the non-64bit reg version (not specifically XP-labeled) for Vista (32-bit). I just tried selecting Albany, NY (not even the whole state), and see:

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Ok so i got mapsource, both pieces, the 3 .zip with exe inside that i installed form my pc to my phone and the keygen.

I sucessfully managed to register Garmin.

Now, what do i do next with what i got... DO i neet the NT or non NT maps... Again, in advance, thanks

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Connect your device using activesync.
Run Mapsource.
Click on Utilities---->Get Unit ID
Once you get your Unit ID, place it in the top line of the Keygen.
Get your GM XT Device Unlock Code and copy to cliwckedoard.
Go to Utilities and paste that 25 digit code into Mapsource.
On same keygen screen, look for Select Map Product.
Scroll down and select custom map set. A small window will open asking you to input the Map ID code.
Enter 243 in this field.
Get the map unlock code and enter that 25 digit code into Mapsource the same way you did your GM XT Device Unlock Code
This will unlock the detailed maps for the US and I believe Canada.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Mark it may be something with Vista. I'll check around and see what I can find might be the problem.

Edit: Mark, download this patch from Garmin's website and see if that fixes the problem with Vista. Several people have had the same problem you are having with Vista.
http://www8.garmin.com/support/downl...ils.jsp?id=209

Read up on it to make sure the problems this patch fixes are the problems you're having.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Hey will, is map source within the 2 rar files i downloaded, i found a setup.exe... is that it?

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

You'll need to place the contents of the 2 files you downloaded into one folder. (Extract them to the same folder.) Then extract the entire program. Once you do that, you'll see the exe to use to install.

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Alright guys here is my head up installing this on the htc touch. It works, i can sync it with a external bluetooth gps. Gotta use com port 4, Follow Will instruction in this thread and u'll get it. Thanks a whole lot man, really appreciate, i just come back from a test drive with it :P Works wonder

Re: Garmin Mobile XT for WindowsMobile V4.20.20wp
 

Cool man. Glad I was able to help out.