Wckediden - Mobile Tricks and Tweaks Community

Wckediden - Mobile Tricks and Tweaks Community (https://www.wckediden.com/index.php)
-   Tutorial Forum (https://www.wckediden.com/forumdisplay.php?f=498)
-   -   [Check4SPAM] RE: URL Attempt (https://www.wckediden.com/showthread.php?t=181159)

jvreeken 02-12-2009 09:13 PM

[Check4SPAM] RE: URL Attempt
 
[URL Attempt] User received an error - No action required!

I made my own cable...
here are the instructions:
WHAT YOU NEED:
http://photos-b.ak.fbcdn.net/photos-...06689_2167.jpg
1) HTC Audio 2.5mm/USB Splitter Cable can be found here http://accessoryone.com/htc-utstarco...s-pr-5594.html
these also came with the 6800 and 6900. (I had a couple lying around)
2) A standard RCA cable cut in half

Steps to Build your cable

Start off by taking the cable splitter:
http://photos-a.ak.fbcdn.net/photos-...06680_2832.jpg AND CUT THE END HEADPHONE END OFF:
http://photos-h.ak.fbcdn.net/photos-...06679_1930.jpgI used an exacto knife to carefully strip back the plastic from the wires from the 2.5mm side of the adapter.
http://photos-f.ak.fbcdn.net/photos-..._306677_38.jpg
DO NOT cut off the metal shielding from the cable just peel it back.
http://photos-g.ak.fbcdn.net/photos-...06686_8976.jpg
The wires on the 2.5mm adpater are: RED,GREEN,BLACK,BLUE,WHITE,YELLOW - You will not need the yellow wire so cut it off/pull it out.
http://photos-g.ak.fbcdn.net/photos-...06678_1031.jpg
Do the same for the RCA CABLE:
http://photos-b.ak.fbcdn.net/photos-...06681_3642.jpg
Now the fun part, splicing them all together in the right pairs:
Here is how to build the cable connect.
WHITE - Positive for VIDEO
BLUE - Negative for VIDEO
BLACK - Positive AUDIO Left
GREEN - Positive AUDIO Right
RED - Connect both Negatives for audio to this wire then ground this to the Shielding (Doing this will help prevent noise!)

THE FINAL STEP:
Remove the no.4 pin from the ext-usb end.
http://forum.ppcgeeks.com/attachment...2&d=1225606714
This will allow the phone to see the adapter as a video adapter instead of a headset. I used a thumb tack to lift the pin, and then just wiggled it back and forth from right to left with an exacto knife until it snapped out...

you could also try a small set of tweezers to pull it out (THIS IS THE HARDEST PART)

tape that sucker up and enjoy!
http://forum.ppcgeeks.com/attachment...4&d=1225606939

wcked 02-12-2009 09:31 PM

Re: [Check4SPAM] RE: URL Attempt
 
can you give us the title name for this so i can change it.You have under 5 post and you can't post live link.Thats why it went into que


All times are GMT -4. The time now is 08:37 PM.

Powered by vBulletin® Version 3.8.14
Copyright ©2000 - 2026, vBulletin Solutions Inc.
POWERED BY PHILLYFINESTSERVERSTAT FOR WCKEDIDEN|- NEXTELELITE| - PPCTHEME| - IDENINSIDER