Treo 750 WM6 ROM! GET IT NOW!
 

Windows Mobile 6 WM6 for Treo 750, 700w v6
Requirements: PPC Treo
Overview: This is the "non-official yet", WM6 update from AT&T for the Treo 750. Copy the image file to your SD card, enter bootloader mode and flash the update. There's detailed instructions on the net. Google is your friend.. :)

Installation and Upgrade Guide

• Plug the Treo 750 into a power source
• Load software update onto your miniSD card (CHEEIMG.nbh file). Insert the card.
• Press and hold both the PTTApp Button (lowest button on left side of device) + Pin Reset (next to miniSD card slot). You no longer need to hold the Windows key as well. You will be prompted to press the End key to start the update. This step takes about 10 minutes to complete.
• Hard reset the device when prompted. To hard-reset, hold the End key while pressing the pin reset button. Answer “yes” to “Erase all data” prompt.
• To verify the software, hold the Down-Arrow while pin-resetting. You will see:
o Firmware: R 1.47.25.00
o ROM: D 1.25
o Keyboard: U 26
• The Bootloader can also be confirmed by holding down the PTT button and pin resetting (without the updater miniSD card inserted)
o SPL: SPL 0.24


Image
Download Instructions:
http://rapidshare.com/files/45691329/CHEEIMG.nbh