View Single Post
  #12  
Old 05-23-2008, 06:26 PM
HIGHDEF360's Avatar
HIGHDEF360 HIGHDEF360 is offline    
Wcked Member
Mobile Model: SPRINT HTC TOUCH

 
Join Date: November 24th, 2007
Posts: 163
Downloads: 0
Uploads: 0
HIGHDEF360 NoobHIGHDEF360 NoobHIGHDEF360 Noob


View HIGHDEF360's Profile   Edit Options Edit Profile Picture View HIGHDEF360's Photo Album Add HIGHDEF360's to Your Contacts Show Groups Edit Avatar Subscribed Threads Private Messages
Default Re: Did not soft reset after Alltell ROM

This what I found...I know it says for Sprint users...Cant hurt to try...If dosnt wrk your in the same situation.....so Maybe try it :o)

Oh ya I found it at PPCGEEKS.COM

--------------------------------------------------------------------------------------------------------------------------------------------------------------------


DOWNGRADING AND REVERTING BACK TO ORIGINAL SPL
1. Download ImCoKeMaN's original unlocker here: ftp://up.ppcgeeks.com/Vogue/Users/Im...e_unlocker.exe
2. Run Vogue_unlocker.exe and follow the on screen instructions to a T as it is very easy to mess up. This will overwrite the 2.31.coke SPL. During the unlocking process your device will display 0.36.coke SPL. This will change once update is complete.
3. Once you finished with the unlocker, your SPL should no longer display 2.31.coke but should now display 0.40.coke.
4. Your device will automatically soft-reset after the update is complete. Do not allow to boot back up into OS. Instead, hold down the camera and power buttons and insert the stylus into the soft-reset hole again putting you in bootloader mode.
IF YOUR DEVICE DISPLAYS AN SPL OF 0.40.coke THEN CONTINUE TO STEP 5. IF NOT THEN RE-RUN STEPS 2&3 UNTIL IT DOES.
5. Since it is recommended that you flash back to the OEM 6.0 Sprint ROM at this time, that is the link that I am providing here. Download and flash the OEM 6.0 Sprint ROM. This will overwrite the custom SPL written by ImCoKeMaN's unlocker.
6. You're now done. Your phone has now been reverted back to it's original shipped state.

PLEASE NOTE: It has been said that GPS radios and Non-GPS radios are very different. Flashing from the original 1.13 Radio to a 3xx Radio will write a TOTALLY new Radio to your device and reverting back to the OEM 1.12 Radio will not completely remove the new 3xx radio.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------


RESTORE THE 1.33.003 PRI
(Must complete the Downgrading and reverting back to original SPL tutorial first - CRITICAL)



If you are a Sprint user and you allowed the Alltel customization to run and complete then you most likely are now wondering where the Sprint PCS banner went from the HTC Home Plugin and are also wondering why you are not able to connect to the internet regardless of what you do. This is a tutorial on how to fix this problem.

What happened to cause this problem is that Alltel's customization also contains a 2.01.001 PRI which is different from Sprint's 1.33.003 PRI. Allowing customization to run will overwrite Sprint's with Alltel's leaving you with no internet or Sprint PCS banner on the Home plugin.

Here is how to fix it:
1. Download GetSPC here: http://www.5gmobile.us/mobilefiles/VX6800/GetSPC.zip
2. Extract the zip file and copy the GetSPC folder to the root of main memory of your device.
3. Go to Start/Settings/System/Device Information and either open notepad or get a piece of paper and write down your ESN. This is your HEX ESN.
4. Run GetSPC.exe from that folder you placed on in the ROOT folder of your device and in the TOP box, type in your HEX ESN. Hit "GO" and the number generated will be your MSL. Write this number down as well.
5. From the dialpad(MUST BE ORIGINAL VOGUE DIALPAD, NOT A SKINNED DIAL PAD) dial ##786# and it will bring up a large list of quite a few different numbers. Write down your MDN and MSID(you will need them, trust me).
6. Click Menu and select reset. It will ask you to put in an unlock code. Type in your MSL. Everything will reset back to the factory defaults, including your PRI, MDN, and MSID.
7. Follow boot sequence and align screen and what not and allow Sprint's customization to complete.
8. From the dialpad, dial ##(6 digit MSL here)# and click edit. Type in your MDN and MSID and click OK.
9. Your phone should now be reverted back to the bare bones stock OEM 6.0 Sprint ROM with the Sprint PRI of 1.33. You're done.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Reply With Quote