Touch Pro (Raphael) HSPL Unlocker And Relocker (CDMA ONLY)

[D/\SH]

“ Originally Posted by MonkeYSpanK ”

i did it a few times (to be exact) and it starts up quick but stops when it says loading. should i let it load longer then 20 mins maybe? it does something because when i reset it from loading i have to do a hard reset to get my touch to work right again.

no it should go immediately and you may just have to do from a computer bro.... not hat hard of a process and dont understand what could be going wrong without seeing.... you prolly doing one step not fully or skipping something....... if you would like i o offer a mod service and i could gt you all hooked up through that... if you want more details you can send me a pm.

[sdwyz74]

once again i have problems with this unlocker i have a pro and i unlocked it and it shut down my whole computer when i go to boot i see SPL-0.37.0000 BUT IT DOES'NT HAVE THE CNONEX BEHIND IT ??? DONT WHATS WRONG BUT NEED ANSWER!

[VenumX]

“ Originally Posted by sdwyz74 ”

once again i have problems with this unlocker i have a pro and i unlocked it and it shut down my whole computer when i go to boot i see SPL-0.37.0000 BUT IT DOES'NT HAVE THE CNONEX BEHIND IT ??? DONT WHATS WRONG BUT NEED ANSWER!

that just means that it didnt go through all the way, try it again.

[D/\SH]

“ Originally Posted by sdwyz74 ”

once again i have problems with this unlocker i have a pro and i unlocked it and it shut down my whole computer when i go to boot i see SPL-0.37.0000 BUT IT DOES'NT HAVE THE CNONEX BEHIND IT ??? DONT WHATS WRONG BUT NEED ANSWER!

unlocking isnt hard are you sure you computer isnt ****ed up because its just plug phone into activesync and connect than run exe or ruu and you good to go.... if it is shutting odwn sounds liek your infected or somehing on your device isnt functioning correctly.

[MonkeYSpanK]

“ Originally Posted by D/\SH ”

no it should go immediately and you may just have to do from a computer bro.... not hat hard of a process and dont understand what could be going wrong without seeing.... you prolly doing one step not fully or skipping something....... if you would like i o offer a mod service and i could gt you all hooked up through that... if you want more details you can send me a pm.

i'll try it again from scratch and see whats up. ur probably right about me missing a step. i appreciate the offer about u doing it for me, but i use my cell all the time for work and can't afford to send it off. thx though

[sdwyz74]

“ Originally Posted by D/\SH ”

unlocking isnt hard are you sure you computer isnt ****ed up because its just plug phone into activesync and connect than run exe or ruu and you good to go.... if it is shutting odwn sounds liek your infected or somehing on your device isnt functioning correctly.

well dont know just know everytime i hook it up and i try to complete the unlocking it shut's down and gives me some warning bullshit??? i'm running a real copy of windows and i have a couple anti virus running but no go on the unlock and as far as the device goes i have 2 TP one brand new in the box and the other a clean used one and both just shut it down so i'll be sending the new one to you and the used one i'll just sell it stock i'm just really want to learn this thing I READ EVERY SINGLE PAGE OF THIS THREAD and i followed the directions. i finally beat the touch vouge challenge i had going with my self and htc mogul no sweat but this TP is a nightmare! OR YOUR RIGHT SOMETHING IS WRONG WITH MY PC SO I'M HOOKING UP MY BACK UP PC NOW IT'S A FRANENSTIEN BUT IT'S FAST AND RUNS GOOD! so i'll get this one up and try again if i ge the same error/shutdown then i know it's the phone

[D/\SH]

“ Originally Posted by sdwyz74 ”

well dont know just know everytime i hook it up and i try to complete the unlocking it shut's down and gives me some warning bullshit??? i'm running a real copy of windows and i have a couple anti virus running but no go on the unlock and as far as the device goes i have 2 TP one brand new in the box and the other a clean used one and both just shut it down so i'll be sending the new one to you and the used one i'll just sell it stock i'm just really want to learn this thing I READ EVERY SINGLE PAGE OF THIS THREAD and i followed the directions. i finally beat the touch vouge challenge i had going with my self and htc mogul no sweat but this TP is a nightmare! OR YOUR RIGHT SOMETHING IS WRONG WITH MY PC SO I'M HOOKING UP MY BACK UP PC NOW IT'S A FRANENSTIEN BUT IT'S FAST AND RUNS GOOD! so i'll get this one up and try again if i ge the same error/shutdown then i know it's the phone

not necessarily the phone... i never heard of one not unlocking..... it can be firewalls and those virus protectors that are casuing it to fail also so disable and try that if you havent.

[RandyBaby]

thanks for the unlocker, im about to try my first new rom

[GokuSS3]

“ Originally Posted by RandyBaby ”

thanks for the unlocker, im about to try my first new rom

Well glad you like it , have fun flashing your first rom too!!!!

[Randomray]

Quick question... How do u get Backup of original sprint rom for warrant and insuarance purposes (incase i gotta return it to the regular sprint rom)???

[jr5416]

“ Originally Posted by Randomray ”

Quick question... How do u get Backup of original sprint rom for warrant and insuarance purposes (incase i gotta return it to the regular sprint rom)???

U dont back it up bro if u ever want to return to the original rom all u have to do is download the rom here and flash back and relock,here is the link that will provide u with the roms to go back to stock rom :

Code

https://www.wckediden.com/stock-rom-links-t178602.html

[Randomray]

Thanks.... i hit that rep button!!!

[m396 #00-011]

I'm having trouble with the links, are they working for everyone else?

[D/\SH]

“ Originally Posted by m396 #00-011 ”

I'm having trouble with the links, are they working for everyone else?

the attachmenbts work fine... what is the problem that is being caused.... need a little detail.

[m396 #00-011]

Wouldn't launch, would get errors to send copy to microsoft. Found latest update for my net framework, and seems to be working now

[PsyChoTk]

I just finished installing Windows 7Pro and when i try to launch the HSPL or any ROM utility the status bar never moves past 0%. I'm all updated with the latest drivers/ programs/ etc.

I see the status in the screen and my phone both show 0%. I've turned off the firewall, etc. but nadda. I assume its 7 and the programs. I've also ran as admin but no luck. anyone else having this issue???

i guess i'll break down and run it from the sd card.

--------- New Post Merged on 13/8/2009 at 05:55:17 --------

as a side note. i've d/led the .037 file twice on two different computers and the file does not extract the .exe file correctly. I think it might be a corrupt file????

[DenverDev]

I have to ask.........

Are any of you that are having difficulty getting your TP unlocked using a VZW Touch Pro?????? The .37 unlocker WILL NOT WORK for a VZW TP........have to get .35 ...... the following is the thread from PPC for the .35

Code

http://forum.ppcgeeks.com/showthread.php?t=42503&highlight=touch+pro+unlocker

HTH

[PsyChoTk]

“ Originally Posted by DenverDev ”

I have to ask.........

Are any of you that are having difficulty getting your TP unlocked using a VZW Touch Pro?????? The .37 unlocker WILL NOT WORK for a VZW TP........have to get .35 ...... the following is the thread from PPC for the .35

Code

http://forum.ppcgeeks.com/showthread.php?t=42503&highlight=touch+pro+unlocker

HTH

nope sprint. using the same software, that got me addicted to flahing in the first place. for some reason when i upgraded from Window 7 RC to a volume license version Windows 7 PRO. nothing wants to work...........................i'm on the wife's laptop running vista home and everything works fine. Maybe, i'll goto the IT department tomorrow and get the introverted nerds on it.

[jerryrigg]

I don't suppose there's a ruu that can be loaded from card for relocking by any chance is there? I need to return the device, but nothng via USB will recognize it. I have been through all the advanced network fucntions, and tried on xp activestink and vista mobile device center. Nill. The new tech at the local sprint store is surprisingly sharp- I don't think I could sneak an unlocked phone past him. anyone, anyone?
thanks

--------- New Post Merged on 14/8/2009 at 12:20:26 --------

nevermind, I figure it out :P

[wickidninja]

i finally got to use this on my touch pro. thanks, and WinMo 6.5 here i come hah

[D/\SH]

“ Originally Posted by wickidninja ”

i finally got to use this on my touch pro. thanks, and WinMo 6.5 here i come hah

hhahahahaha about time! now g3et to unlocking and flashing a custom rom :smile: remember to read and re-read the flashing guide ansd follow the steps and you will be golden,

[slick78]

after you download the relocker zip for touch pro what do you do with it? I mean how do i run it to relock my phone?

[D/\SH]

“ Originally Posted by slick78 ”

after you download the relocker zip for touch pro what do you do with it? I mean how do i run it to relock my phone?

plug your phone into your computer and connect via activesync or mobile device center. than double click on the exe and follow the steps...

[slick78]

i dont get anything like that when i unzip the file all it has a picture of somehing that looks like a piece of paper with the right top corner folded down?

--------- New Post Merged on 18/8/2009 at 03:37:18 --------

what should i see when i unzip file?

[VenumX]

“ Originally Posted by slick78 ”

i dont get anything like that when i unzip the file all it has a picture of somehing that looks like a piece of paper with the right top corner folded down?

--------- New Post Merged on 18/8/2009 at 03:37:18 --------

what should i see when i unzip file?

when you open the zip file in either winzip, winrar, or 7zip you should see a file called "Raphael_CDMA_HSPL_037.exe" you then drag that file from the zip archive into another folder, or your desktop. From there you can run that file (with ur phone plugged into the computer) and it will do everything for you...like magic.

[slick78]

“ Originally Posted by VenumX ”

when you open the zip file in either winzip, winrar, or 7zip you should see a file called "Raphael_CDMA_HSPL_037.exe" you then drag that file from the zip archive into another folder, or your desktop. From there you can run that file (with ur phone plugged into the computer) and it will do everything for you...like magic.

i downloaded the relocker file, so thats the wrong one? Is there something that i need to download on my pc that i may be missing? i have winrar but when it extracts it is that pic that i described earlier?

[VenumX]

“ Originally Posted by slick78 ”

i downloaded the relocker file, so thats the wrong one?

oh i guess i didnt read that far back in the thread, are you trying to unlock your phone so you can put a new ROM on it or are you trying to flash back to stock and relock your phone?

[slick78]

i just flashed back now i am trying to lock it so i can return to store

[VenumX]

“ Originally Posted by slick78 ”

i just flashed back now i am trying to lock it so i can return to store

ok so as long as you are relocking it you have downloaded the correct file... so when you open the zip file in winzip/winrar/7zip you will see an exe called "Raphael_CDMA_Relocker.exe" and drag that to a folder / desktop. run it from wherever you dragged it to with ur phone plugged in and it will relock ur phone

[slick78]

something must be missing on my end, cause when i unzip the file attached all i get is a picture that shows up (like i dont have the program to run it or something) do i need something downloaded on my pc to run it. I have locked and relocked phones before and don't remember having this problem?

[PsyChoTk]

“ Originally Posted by slick78 ”

something must be missing on my end, cause when i unzip the file attached all i get is a picture that shows up (like i dont have the program to run it or something) do i need something downloaded on my pc to run it. I have locked and relocked phones before and don't remember having this problem?

i did. it didn't download right for me on 2 different computers. i think the upload might be bad???? idk, thou it could be just me....

[slick78]

i have downloaded it a couple of times but the same thing keeps happening

[PsyChoTk]

“ Originally Posted by slick78 ”

i have downloaded it a couple of times but the same thing keeps happening

Try this one. I just used it the other day. It's my personal copy.

[slick78]

“ Originally Posted by PsyChoTk ”

Try this one. I just used it the other day. It's my personal copy.

is this the relocker, i am trying to relock my phone

[D/\SH]

the attachments work fine for me dont understand the troubles..... and just take this title and throw it into google and you will find double digit numbers of forums, and other places that hasve it as well as us.... i dont know what the issue is but downloading using firefox with no uissue and used as a test ansd all works fine.

[wcked]

“ Originally Posted by D/\SH ”

the attachments work fine for me dont understand the troubles..... and just take this title and throw it into google and you will find double digit numbers of forums, and other places that hasve it as well as us.... i dont know what the issue is but downloading using firefox with no uissue and used as a test ansd all works fine.

yep me too i have no issues..i take it they're downloading using ie..try using firefox or safari

[PsyChoTk]

“ Originally Posted by wcked ”

yep me too i have no issues..i take it they're downloading using ie..try using firefox or safari

yea, IE8 and IE7....................i'm a slave to m$....

[slick78]

i dont know, when i try and run it i get an error message saying "the application failed to intialized properly"

[D/\SH]

“ Originally Posted by slick78 ”

i dont know, when i try and run it i get an error message saying "the application failed to intialized properly"

mmmm thats odd, have you tried to download without ie ansd using firefox?

[Jjday7]

Dash do you have any idea why I cannot access any content on the site.... I was fine the other day but now I get this message. Really didn't want to post this here but I can only get into the forum

you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

[D/\SH]

“ Originally Posted by Jjday7 ”

Dash do you have any idea why I cannot access any content on the site.... I was fine the other day but now I get this message. Really didn't want to post this here but I can only get into the forum

you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

read the rules and you will find the answer..

[Jjday7]

I just looked over all the rules and don't see anything that applies. Can you let me know what caused this. I haven't done anything against the rules. was my account disabled?

[D/\SH]

“ Originally Posted by Jjday7 ”

I just looked over all the rules and don't see anything that applies. Can you let me know what caused this. I haven't done anything against the rules. was my account disabled?

dude are you serious..... send me a pm this is ridiculous and has been talked about hundreds of times.

[BigBadWolf77]

“ Originally Posted by Jjday7 ”

I just looked over all the rules and don't see anything that applies. Can you let me know what caused this. I haven't done anything against the rules. was my account disabled?

DASH EDIT: not on main boards

[D/\SH]

“ Originally Posted by BigBadWolf77 ”

DASH EDIT: not on main boards

please dont post that information on the boards... please refer them to the thread under the welcome center of the site under main category tab

[Shamarr]

Why is it that when I download the file it comes downloads as a wmv file? Am I doing something wrong?

[D/\SH]

“ Originally Posted by Shamarr ”

Why is it that when I download the file it comes downloads as a wmv file? Am I doing something wrong?

you have wmp opening all files, this is a zip file so you will need to open on your computer with a program named winrar.

[blackdiamond017]

“ Originally Posted by D/\SH ”

you have wmp opening all files, this is a zip file so you will need to open on your computer with a program named winrar.

For some reason, my pc won't open the file when it's extracted. I extracted it to a folder on my desktop and then when I tried to open the containing file. It asked what I wanted to open it with. Not sure what I'm doing wrong here.

[jr5416]

“ Originally Posted by blackdiamond017 ”

For some reason, my pc won't open the file when it's extracted. I extracted it to a folder on my desktop and then when I tried to open the containing file. It asked what I wanted to open it with. Not sure what I'm doing wrong here.

Try this bro i had the same problem hopefully this helps :

Code

https://www.wckediden.com/winrar-380-pro-t184735.html?t=184735&highlight=winrar

[blackdiamond017]

“ Originally Posted by jr5416 ”

Try this bro i had the same problem hopefully this helps :

Code

https://www.wckediden.com/winrar-380-pro-t184735.html?t=184735&highlight=winrar

Thanks man but can't get there. My account doesn't have the privs. It looks like the version I have currently. I actually downloaded it here a while back.