[Android] HTC HERO Sprint Stock ROM - 1.29.651.1

Installation Instructions:
ROM version 1.29.651.1

Installation Instructions:

1. Hardware Requirements (PC)
1 GHz or higher processor clock speed recommended
512 MB of RAM or higher recommended
Super VGA (800 x 600) or higher-resolution video adapter and monitor
150 MB of available free hard disk space
USB 2.0 is required

2. Software Requirements - Supported Operating Systems (PC)

Windows XP Home Edition Service Pack 2
Windows XP Professional Edition Service Pack 2
Windows XP Media Center Edition Service Pack 2
Microsoft Windows Vista Ultimate Edition
Microsoft Windows Vista Enterprise Edition
Microsoft Windows Vista Business Edition
Microsoft Windows Vista Home Premium Edition
Microsoft Windows Vista Home Basic Edition

3. Installation Instructions

Before you proceed the ROM Update Utility (RUU), please confirm the following items:
(1) This software upgrade is a newer version than what is currently installed on your phone. If it is the same version and your phone is operating normally, there is no need to reinstall the software.
To check what version is installed on your phone, press Home > Menu > Settings > About phone > Build number, and note the Build number.
(2) HTC Sync has been installed on your PC. HTC Sync can be found on the MicroSD card that was shipped with your phone. You can also download and install HTC Sync at

Code

www.htc.com/www/support/

(3) Your phone is connected to your PC using a USB cable. The PC must recognize your phone.You will see a sync icon HTC Sync Icon.bmp in the taskbar once the phone has been connected.
(4) Standby and hibernation mode on your PC has been disabled.
(5) Close all running applications on the PC.
(6) The Screen unlock pattern has been disabled, press Home > Menu > Settings > Security and uncheck Require pattern
(7) Make sure that the battery level of the phone is at least 30% (at least 3 green blocks). To check the battery level, tap Home > Menu > Settings > About phone > Status > Battery level.
(8) Once the RUU is downloaded, launch the application on your PC and follow the instructions on screen.

Warning!

* Please note that this upgrade will erase any data stored on the phone. We recommend that you back up all your data before performing this upgrade.
* This is a generic software update. Any additional software or settings provided by your mobile operator or company will be lost. If you require this customization, please contact your supplier first before upgrading.
* The update will take up to 10 minutes, DO NOT interrupt the update process, make/receive phone calls, disconnect the phone from the PC, or press any buttons until the process has been completed.

[wcked]

the attached image is not a sprint picture.It's an example picture to read about the instruction.The file i got it from xda when i find it i'll post it.

[forty01]

Always becareful as to what you update, because this could patch up the kernal that is letting us exploit our phones from being Rooted. I'm not saying that is the issue here, just something to think about here or future updates, upgrades, andso forth :)

[aceofspades626]

THANK YOU.
the geniuses @ my local Sprint repair stores (tried two of them) have the information about the known issue with software version 1.22 refusing to recognize OTA updates, but they haven't been provided this software!
They told me they'd check into it and call me in a week!
If you want something done right...