[RELEASE] Advanced Network Caller ID Updated v5 with StandAlone GUI

an enhanced Caller ID. On incoming SMS or phone calls a window pops up that displays,

- The full name of caller
- Address of caller with a map link 
- The number of FTC and caller complaints (to tell if its a spam call)
- Telco name and location (can tell what carrier the call is from) d_
- Relatives of caller (with age!) Do)
- Criminal History

I've also added the ability to add the caller to the contacts book, return the call, and look at past calls. A standalone GUI to run alone and lookup past calls can also be used.

I've only tested and ran this on the HTC Touch Pro and it works well, even for unknown cellular calls. It's kind of crazy the information you can get.

Looking for suggestions, changes, additions - definitely let me know and I will happily (and quickly) add them. You can reach me at kwatkins@gmail.com

Release Notes

- NetCallerID waits until the call is answered or finished before doing the network calls. For the most part, the network connection is unavailable until the phone call is ended.
- If roaming is enabled NetCallerID waits until your out of roaming.
- All history of calls are in the program files\netcallerid\calllogs directory in html format. You can view these with Opera or Pocket IE.
- The setup automatically starts the program. I also put it in \Windows\Startup to start when you re-start the phone.

Download:

Code

http://www.kwatts.net/netcallerid/netcallerid.cab

Code

http://www.kwatts.net/netcallerid/netcallerid.msi

,
Instructions:

Just download the cab and run it on the device. It will automatically start and also start on reset. For the msi, install it on the PC, it will be added to your phone when you connect it to the PC. Go under programs and click the netcallerid icon to run the standalone GUI.


This is very alpha. Pre alpha even. I'm not liable for anything, run at your own risk, etc etc

Prerequisites

-WM5 or 6/6.1 with CF 3.5

Changes for v .3 U
'`
- Added logic to the add to contacts where if name is in address book prompt/don't add.
- A full standalone app has been added where you can lookup past calls. SfbjP#C^
- Added the program to the programs list.
- Numerous bug fixes
- SMS is now turned off by default. Some people were getting Very.Bad results where SMS messages were being swallowed. I *think* it should be fixed but unsure, it's something in the SMS .net interception library. If you really want SMS turn it on under config, do a soft reset, and if you see your not getting SMS messages immed. uninstall and let me know!
- added whitepages.com lookups
-





Prerequisites

-WM5 or 6/6.1 with CF 3.5

Changes for v .4

- UI changes to work on all WM phones and resolutions (including QVGA 320x320)

Changes for v .3

- Added logic to the add to contacts where if name is in address book prompt/don't add.
- A full standalone app has been added where you can lookup past calls.
- Added the program to the programs list.
- Numerous bug fixes
- SMS is now turned off by default. Some people were getting Very.Bad results where SMS messages were being swallowed. I *think* it should be fixed but unsure, it's something in the SMS .net interception library. If you really want SMS turn it on under config, do a soft reset, and if you see your not getting SMS messages immed. uninstall and let me know!
- added whitepages.com lookups
-

Changes for v .2

- Fixed install to storage device errors
- Fixed the configuration GUI
- Added MSI installer



Changes for v .5

- extended API.
- updated GUI
- better support for all wm platforms
- numerous bug fixes
GRTZ WEESJE
MODERATOR@Wckediden HIT THANKS ON THE WAY

[bxr84257]

I tried to install this but I got an error message saying "this application requires a newer version of the Microsoft .NET compact framework than the version installed on this device." I installed the msi to my PC, but i never saw it being added into my phone?? and by the way what is msi lol?? THANKS!!

[MikeyD]

“ Originally Posted by bxr84257 ”

I tried to install this but I got an error message saying "this application requires a newer version of the Microsoft .NET compact framework than the version installed on this device." I installed the msi to my PC, but i never saw it being added into my phone?? and by the way what is msi lol?? THANKS!!

if you had the .net 3.5 framework and your phone activesynced it should have installed on your phone....or just search for the cab to put on your phone i know we have it here.

[V I P]

I installed and opened the application and clicked on look up and config and they both come up with an error message.

[CYBER WEESJE]

“ Originally Posted by V I P ”

I installed and opened the application and clicked on look up and config and they both come up with an error message.

hi whats the error msg give a bit more info


GRTZ CYBER WEESJE
MODERATOR@Wckediden

[V I P]

I don't get the error message anymore but the application doesn't seem like it is VGA compatible. You can't see the top of it and it doesn't look like the screen shots.

[JDMSOHC]

well as stated in the first post, he tested it on his Touch Pro and it worked fine "vga" and I'm using it flawlessly on my Touch Pro "vga" so there must have been an issue with ur install, i'd uninstall and try again... I've had no problems at all..

[CYBER WEESJE]

“ Originally Posted by jdmsohc ”

well as stated in the first post, he tested it on his touch pro and it worked fine "vga" and i'm using it flawlessly on my touch pro "vga" so there must have been an issue with ur install, i'd uninstall and try again... I've had no problems at all..

thanks for the feedback


grtz cyber weesje
moderator@Wckediden

[V I P]

“ Originally Posted by JDMSOHC ”

well as stated in the first post, he tested it on his Touch Pro and it worked fine "vga" and I'm using it flawlessly on my Touch Pro "vga" so there must have been an issue with ur install, i'd uninstall and try again... I've had no problems at all..

Did you download the cab that is uploaded to the site?

[kr1m3boss]

Im also using this on a Sprint Touch Pro and it works fine but the only time I would get an error is when I hit lookup more than once. Other than that it works ok

[sep30012002]

This program is crazy man, it gives me every blood related family member you know just by the phone number. Scary!

[V I P]

People that are using this on the TP...does the program look like the screen shots? This program does not work very well for me. It is almost unresponsive....ie takes about 20 seconds to respond to a tap and it only works once in a while

[CYBER WEESJE]

“ Originally Posted by V I P ”

People that are using this on the TP...does the program look like the screen shots? This program does not work very well for me. It is almost unresponsive....ie takes about 20 seconds to respond to a tap and it only works once in a while

hi if you see the feedback its working for members that installed it dont now what the problems on your device is and give no support on this



GRTZ CYBER WEESJE
MODERATOR@Wckediden

[V I P]

Here is a new version that I am going to try anyway...

Code

http://forum.xda-developers.com/showthread.php?t=494433

[CYBER WEESJE]

“ Originally Posted by v i p ”

here is a new version that i am going to try anyway...

Code

http://forum.xda-developers.com/showthread.php?t=494433

thread update hope this one works for you



grtz cyber weesje
moderator@Wckediden

[V I P]

This version seems to be working much better.....at least as far as the interface and responsiveness. We will see about the amount of info provided. Here is the cab of the newest version.

[CYBER WEESJE]

“ Originally Posted by v i p ”

this version seems to be working much better.....at least as far as the interface and responsiveness. We will see about the amount of info provided. Here is the cab of the newest version.

hi yeah the new one is already in the first posted




grtz cyber weesje
moderator@Wckediden

[jdep1]

i tried the first released and was really bugy i know some of the bugs where fix so i guess i'll give it a run.

[ebuzz]

“ Originally Posted by CYBER WEESJE ”

hi yeah the new one is already in the first posted




grtz cyber weesje
moderator@Wckediden

I tried both of these, the .cab and the .msi files. While the .cab version did seem to show up better on screen, the .msi version had more info for the same calls. For example, with the msi one I got the name and carrier of the call, but with the .cab version installed the same info did not show up. Anyone else have that?

[V I P]

“ Originally Posted by ebuzz ”

I tried both of these, the .cab and the .msi files. While the .cab version did seem to show up better on screen, the .msi version had more info for the same calls. For example, with the msi one I got the name and carrier of the call, but with the .cab version installed the same info did not show up. Anyone else have that?

I'm running the v5 cab that i posted and I haven't got any info out of it.....for any number. What is msi? and what version are you talking about?

[ebuzz]

“ Originally Posted by V I P ”

I'm running the v5 cab that i posted and I haven't got any info out of it.....for any number. What is msi? and what version are you talking about?

Well, IDK what the .msi is, but in the file in the first post the netcaller-v4.rar, when you open it there's an msi file. when you run that from your PC it puts this app on your phone. That's the way I got info, not from the ver. 5 cab file. That didnt really give any info.