ICube For The Mogul

[D/\SH]

“ Originally Posted by babydolltracy ”

Ok just to make sure, this is for the PPC 6800 (mogul) right? if so i tried downloaded both files and load them on to my phone. I soft resetted and nothing worked? it remained on the original screen. Now i don't have anything on my phone except for the original settings and programs. Can you tell me what's going on? Oh yeah i tried uninstalling it and installing it about 3 times before I gave up. Tried looking for other people who have the same errors but no hope. (i read on something you said that said it will not work on moguL? but i didn't get it since this post said icube on mogul) Can you help me?

yes the title says mogul. all you do is in stall the cube can first than the icube cab second and than soft reset and you will be golden....... dont understand why it wouldnt work for you if you did that....... never gave me any problems. also im pretty sure there is a readme or nfo file you might want to try reading thta for install instructions (inside the zip/rar file)

[loki007420]

“ Originally Posted by D/\SH ”

ok you only have to post once i already answered your same questions in a different thread. only warning on the double posting. slide2unlock that is a problem with the 2 programs since the cube wasnt ever meant to be on the mogul unless you are using the flashlight version than you can out it on the exclude list. and for the other i dont know what to tell you.... prolly s2u also but seriously why the big deal on that i only allign my screen once and that is when i do a hard reset or flash my rom.

this kinda confused me, im really intrested in using this program, i was using UL but that kinda drove me nuts (had some problems and didnt bother to look it up).. Does this not play well with s2unlock? :hiding:

[D/\SH]

“ Originally Posted by loki007420 ”

this kinda confused me, im really intrested in using this program, i was using UL but that kinda drove me nuts (had some problems and didnt bother to look it up).. Does this not play well with s2unlock? :hiding:

plays fine with the newes version of S2U2. and all you do is install the 2 cab files.

[Troublerite]

DASH,

Is this (...fig-xplode.cab) also the link for downloading the iCube on the Sprint Touch? I attempted to do so on my storage card and got the message:

"Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permission."

[lunatic9025]

Ok when i click on _setup it takes me 2 the internet for some reason, I guess my question is wat king of program is the setup so it will stop thinking that it is an internet file or something?

[D/\SH]

“ Originally Posted by lunatic9025 ”

Ok when i click on _setup it takes me 2 the internet for some reason, I guess my question is wat king of program is the setup so it will stop thinking that it is an internet file or something?

just follow the steps and install the 2 cab files bro..... they have to be done on the phone not the computer.

[lunatic9025]

Yea thats wat im sayin, i click setup and it goes str8 to IE... i have no idea y...

[BiG JeW]

“ Originally Posted by lunatic9025 ”

Yea thats wat im sayin, i click setup and it goes str8 to IE... i have no idea y...

Soft reset and try again.. you are installig the files from the phone?!

[lunatic9025]

yea, im doin this on my phone, soft reset with no luck... ok the setup is an XML Source File, all other downloads are WinRAR archives when im on the computer then when i get to the phone there is no problem, but when on the computer for this setup is a XML source file instead of WinRAR and when i get to the phone it shows up as an internet explorer file...

[BiG JeW]

“ Originally Posted by lunatic9025 ”

yea, im doin this on my phone, soft reset with no luck... ok the setup is an XML Source File, all other downloads are WinRAR archives when im on the computer then when i get to the phone there is no problem, but when on the computer for this setup is a XML source file instead of WinRAR and when i get to the phone it shows up as an internet explorer file...

Dude you need to intall the first link from the phone. the second link you need to extract the winzip files from the pc and then follow the steps.... ITs written on the top!!

[lunatic9025]

the first link is not installing when i click on setup on the PHONE, it is bringing up the internet browser with all the code i guess..

[D/\SH]

“ Originally Posted by lunatic9025 ”

the first link is not installing when i click on setup on the PHONE, it is bringing up the internet browser with all the code i guess..

what are you talking about they are cab files you are prolly clicking the xml file which meands you uncompressed too far........ go to the noob guide and rea thta beofre trying this so you can learn to install cab files....... you want it to end in .cab

[BiG JeW]

“ Originally Posted by D/\SH ”

what are you talking about they are cab files you are prolly clicking the xml file which meands you uncompressed too far........ go to the noob guide and rea thta beofre trying this so you can learn to install cab files....... you want it to end in .cab

lmao!

[lunatic9025]

omg i have many programs on my mogul i kno how 2 install cab files since day one, D/\SH im tellin u this one file is not appearing on my screen as a cab file, lyk no bs im not a noob... it says its an xlm file which is a java file, i have no idea y its sayin that, i jus wanna kno if u have any suggestions...

[lunatic9025]

oh by the way im unzippin wit winRAR...

[D/\SH]

“ Originally Posted by lunatic9025 ”

oh by the way im unzippin wit winRAR...

yea as i said above you went to far with unzipping you can take apart a cab file you know....!!!!!!!

[lunatic9025]

ok i figured it out, when rapidshare downloads the software it automatically sends it to winRAR to unzip and stuff, but this file didnt need unzipping so since i use firefox it doesnt ask me whether i want to save or open the file it automatically opens to WinRAR, wat i did was try it wit internet explorer and ie gives u the option to save or open so i jus saved which bypassed the unzipping using winRAR

[ShakerHP]

Greetings;
I really like this iCube thing for the Mogul, but is there a way to edit the contacts block, the button, instead of it going to the stock contacts i would like it to go to iContact.exe??? is there a way to do this?

Thank You!

Shaker HP

[D/\SH]

“ Originally Posted by ShakerHP ”

Greetings;
I really like this iCube thing for the Mogul, but is there a way to edit the contacts block, the button, instead of it going to the stock contacts i would like it to go to iContact.exe??? is there a way to do this?

Thank You!

Shaker HP

yes as said before use the app called cube config. you cna find by doing a search.

[Mike20PR]

i installed the icube but the launcher side doesnt display properly, it shows the names but the display is stuck in the animation inbetween pages, and its black
Posted via Mobile Device

[D/\SH]

“ Originally Posted by mike20pr ”

i installed the icube but the launcher side doesnt display properly, it shows the names but the display is stuck in the animation inbetween pages, and its black
Posted via Mobile Device

have you tried to soft reset and you installed to the main memory and noty the card right because the card loads slower than the stuff on the main memory which can casue the images to load slower giving you the problem you have.

[Bigoc50]

hey, I installed the touch flo on my tytn ll and its working alright, but the problems came when I installed the icube for the mogul, I since then hard reseted and just use touchflo, but is there any way I can have icube as well...... the main problems were the icons didnt go to anything like my touchflo now my music icon doesnt work it keeps saying audio manageer isnt there or somthing.

[D/\SH]

“ Originally Posted by Bigoc50 ”

hey, I installed the touch flo on my tytn ll and its working alright, but the problems came when I installed the icube for the mogul, I since then hard reseted and just use touchflo, but is there any way I can have icube as well...... the main problems were the icons didnt go to anything like my touchflo now my music icon doesnt work it keeps saying audio manageer isnt there or somthing.

you are really confusing can you try to be more specific on what you want?????? your jumping all over the place and cant get a grasp on what you are saying.

[cuz215]

a

[D/\SH]

“ Originally Posted by cuz215 ”

a

what is that supposed to mean please dont trash the threads with useless and meaningless poswts. Thanks

[cuz215]

“ Originally Posted by D/\SH ”

use cube config 4.1

I've done some searching, but I'm not able to fine a download for cube config 4.1. I've got 3.0, so I figure thats the reason why I can't customize all the buttons that aren't working with this app. Where can I find CubeConfig4.1?

Oh and thanks for the app, outside of not being able to customized the buttons yet, this app kicks ass!! Thanks

[D/\SH]

“ Originally Posted by cuz215 ”

I've done some searching, but I'm not able to fine a download for cube config 4.1. I've got 3.0, so I figure thats the reason why I can't customize all the buttons that aren't working with this app. Where can I find CubeConfig4.1?

Oh and thanks for the app, outside of not being able to customized the buttons yet, this app kicks ass!! Thanks

bro search for cube customizer or just customizer and you will find it not that hard and also stickied if not mistaking under the 6800 and touch areas of the help desk..... PLEASE SEARCH!!!!

[cuz215]

“ Originally Posted by D/\SH ”

bro search for cube customizer or just customizer and you will find it not that hard and also stickied if not mistaking under the 6800 and touch areas of the help desk..... PLEASE SEARCH!!!!

bro, I must be doing something wrong. I keep coming up wiht the same threads and none have the app, I can only find post's mentioning it. You said it was easy to find, so what am I doing wrong when I search in thread titles, and in all post. I search for cube customizer, cube configurator, cube config, icube config, icube customizer, ect., and I still get all the same threads with no app. Any help would be appreciated. Thanks

[D/\SH]

“ Originally Posted by cuz215 ”

bro, I must be doing something wrong. I keep coming up wiht the same threads and none have the app, I can only find post's mentioning it. You said it was easy to find, so what am I doing wrong when I search in thread titles, and in all post. I search for cube customizer, cube configurator, cube config, icube config, icube customizer, ect., and I still get all the same threads with no app. Any help would be appreciated. Thanks

e you joking searched cube customizer and found it right away: https://www.wckediden.com/showthread...695#post189695

[cuz215]

Thanks,
I ended up getting it from the following link. Incase anyone wants.


D/\SH EDIT: deleted link since we have posted here and working fine without any troubles.... no need to make people go elsewhere for the same thing.


Cool, no problem. This cube setup is bad ass bro, I've been tring three different iphone interfaces, and this is, by far in my opinion, the best. Thanks for the help!!

[cuz215]

Hey is there a database for additional icons for this config? Or is there an easy way to config teh icons for using Config 4.1? I change the icons to a different .brn file, but there is no change. Any suggestion?

[D/\SH]

“ Originally Posted by cuz215 ”

Hey is there a database for additional icons for this config? Or is there an easy way to config teh icons for using Config 4.1? I change the icons to a different .brn file, but there is no change. Any suggestion?

did you sift reset after you changed the icons cause the cubeconfig does work........ and for the files to work you have to have the dimensions exactly correct or they wont work period.

[princessmari11]

do i have to be premuim memeber to get it ???? b/c i do not want it stopping after 90 days..........

[broSki]

“ Originally Posted by princessmari11 ”

do i have to be premuim memeber to get it ???? b/c i do not want it stopping after 90 days..........

no u dont, all apps here are full versions

[graff3]

installed the programs but as stated earlier it did not want to autostart. i followed the directions as stated above. i am trying to reinstall right now, the only thing it gave me after install was a toold folder in the programs. how do i get it up and running?

P.S. after i installed icube it said it may not work because it is for an older version of windows

[D/\SH]

“ Originally Posted by graff3 ”

installed the programs but as stated earlier it did not want to autostart. i followed the directions as stated above. i am trying to reinstall right now, the only thing it gave me after install was a toold folder in the programs. how do i get it up and running?

P.S. after i installed icube it said it may not work because it is for an older version of windows

bro look at the title made for moguil and it does work ive used it you swipe your finger up you dont open with a folder. go to options and look at touchflo config and make sure bottom to top is open cube and top to bottom is close cube.

[graff3]

i figured out how to work it, now it asks me if i have touchflo installed when i try opening cube settings.

[raybond25]

“ Originally Posted by graff3 ”

i figured out how to work it, now it asks me if i have touchflo installed when i try opening cube settings.

well, do you have touchflo installed? lol if you don't then logically that would be the place to start

[graff3]

touchflo is installed man

[raybond25]

did you soft reset after insalling both cabs?

[jmart]

when i opened up the zip for the cube, it downloaded but stated that it was for an older version and may not work properly. I did a soft reset and nothing happened, ever run into this before. I'm running wm 6 pro with the 2.17 rom update

[D/\SH]

“ Originally Posted by jmart ”

when i opened up the zip for the cube, it downloaded but stated that it was for an older version and may not work properly. I did a soft reset and nothing happened, ever run into this before. I'm running wm 6 pro with the 2.17 rom update

bro i didnt mean here i meant where you got the files.... and you downloaded the mogul version correct since you do have the mogul..... if not thats why nad it will always say that since it is a custom made application... also there will be two files the skin and touchflo

[GokuSS3]

This is a great app for the Mogul huge upgrade from the normal Cube.... Thanks

[GokuSS3]

Dash I lose my screen taps when i have the cube installed anyway to get those back ? Or does is require a reg edit ?

[D/\SH]

“ Originally Posted by GokuSS3 ”

Dash I lose my screen taps when i have the cube installed anyway to get those back ? Or does is require a reg edit ?

there is no way to get them back period.

[GokuSS3]

Dam that sucks oh well can live with out it.....

[D/\SH]

“ Originally Posted by GokuSS3 ”

Dam that sucks oh well can live with out it.....

lmao word i did that on my mogul since i used touchflo but not the cube.

[GokuSS3]

Not to get off topic for long but when does Sprint get the Pro Touch ? Phone looks sick in the you tube videos

[D/\SH]

“ Originally Posted by GokuSS3 ”

Not to get off topic for long but when does Sprint get the Pro Touch ? Phone looks sick in the you tube videos

in a couple weeks do a searh for it i even wrote my review since i got it.

[GokuSS3]

A Search here in Wckediden or on youtube ? And thanks for the info....