Touch Pro (Raphael) HSPL Unlocker And Relocker (CDMA ONLY)

CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you!

SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!!

there are again two HSPL's (similar scene to Diamond_C).

1. 0.25.MFG for the hackers, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc. ;)

2. 0.37 for other people, this has no screen issues but no MFG commands.

(the SSPL is based on the MFG but do not use it as such, only use it to get Hard-SPL on the device!)


Instructions:

first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael (SPRINT etc - see note below!!), then you have to use this hardspl, not the one at xda-developers!!!

NOTE: tested on Sprint touch pro so far, we would like to test Verizon etc touch pro's when they come out.

ok, now the instructions themselves.

0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the Raphael_CDMA_HSPL_037.zip unless you want to tinker with MFG SPL.
3) you must Have Phone Synced with PC in Windows Mobile!
4) run Raphael_CDMA_HSPL_037.exe (or maybe 025, if you want to experiment with MFG SPL),
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say 0.25.C-SSPL.
7) SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.37.CMONEX (or 0.25.CMONEX MFG).

NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.

NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.

NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.

NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.

NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio.

[PHE-NOM]

Originally Posted by elboriyorker

unlock my newee pro without any issues.


@jsgeezie what i did since i have to send my mogul back and did it few other times just put back to stock rom and leave it unlock.. i was not question about it at all...

yeap, just send it back unlock bro. you shoulnd have any problems like elboriyorker said.

[jr5416]

Thanks for this guys ijust unlocked my phone for the very first time tool me long enough lol a whole year .Took me less then 2mintues and it was all done i confirmed it and yea its unlocked this is very easy noobs out there just do it.

[mikewhooo]

i cant even get mine to run when i download it its just 1 file try to open it and it says windows can't find program to open with. i did it before it wont do it now. i had to re download it because i redone windows

[jr5416]

Originally Posted by mikewhooo

i cant even get mine to run when i download it its just 1 file try to open it and it says windows can't find program to open with. i did it before it wont do it now. i had to re download it because i redone windows

Sounds like you dont have winrar bro .

[mikewhooo]

Originally Posted by jr5416

Sounds like you dont have winrar bro .

i sure do because its in the win rar format but only i file unzips

[jr5416]

Originally Posted by mikewhooo

i sure do because its in the win rar format but only i file unzips

So ur saying u do have the program winrar .

[mikewhooo]

oh yea i sure do

[jr5416]

Originally Posted by mikewhooo

oh yea i sure do

Your problli having the same problem i have on my computer sometimes .Sometimes i cant open rar files but ur saying u cant open zips?

[D/\SH]

Originally Posted by jr5416

Your problli having the same problem i have on my computer sometimes .Sometimes i cant open rar files but ur saying u cant open zips?

have you tried the newest version of winrar..... it fixed a lot of those troubles and havent had one since. aslo try a redownload of the zip again since i just downloaded and it came out fine.

[mikewhooo]

will try soon as i get home

--------- New Post Merged on 23/4/2009 at 11:18:09 --------

got it finally took me a few

[bobbyk19]

I've been trying to download Raphael_CDMA_HSPL_037.zip and everytime i try to unzip it says it is corrupeted what can i do?

[D/\SH]

Originally Posted by bobbyk19

I've been trying to download Raphael_CDMA_HSPL_037.zip and everytime i try to unzip it says it is corrupeted what can i do?

try a different internet browser and see what it does for you.... i just downloaded with firefox and had no troubles..... most forums now a days run best with firefox and that includes ares.

[gbogart100]

So when Im trying to go from custom to stock, do I relock first then flash the stock rom, or flash stock rom, then relock?

Also, do I need to throw the relocker in a RUU, cuz it's not an .exe file for me when I DLed

[jr5416]

Originally Posted by gbogart100

So when Im trying to go from custom to stock, do I relock first then flash the stock rom, or flash stock rom, then relock?

Also, do I need to throw the relocker in a RUU, cuz it's not an .exe file for me when I DLed

You gotta flash to stock rom and radio then lock it , bro if you lock it first how do you think your going to get the rom in your phone.

[PHE-NOM]

Originally Posted by gbogart100

So when Im trying to go from custom to stock, do I relock first then flash the stock rom, or flash stock rom, then relock?

Also, do I need to throw the relocker in a RUU, cuz it's not an .exe file for me when I DLed

you dont "need" to re-lock your phone to flash back to custom. it will flash just fine, i've done it many times. you only NEED to unlock your phone when flashing from stock to custom.

[jr5416]

Originally Posted by PHE-NOM

you dont "need" to re-lock your phone to flash back to custom. it will flash just fine, i've done it many times. you only NEED to unlock your phone when flashing from stock to custom.

yea bro but he wants to go to stock rom for some reason ,so if he has to return it to his carrier wouldnt it be better if he locked it ?

[PHE-NOM]

Originally Posted by jr5416

yea bro but he wants to go to stock rom for some reason ,so if he has to return it to his carrier wouldnt it be better if he locked it ?

yeah he can, but not necessary. it's also good to go to stock every now and then, to clean your phone out after flashing so much, lol. that's why i do it. i flash to stock for like 10 minutes, and reflash to whatever rom i want....

[D/\SH]

Originally Posted by PHE-NOM

yeah he can, but not necessary. it's also good to go to stock every now and then, to clean your phone out after flashing so much, lol. that's why i do it. i flash to stock for like 10 minutes, and reflash to whatever rom i want....

there is no need that i can see to go back to stock occassionally? what is it really oing to do? a flash is a flash

[gbogart100]

Thats weird, when I had my mogul I returned it to stock by relocking first, then flashing a stock ROM and it worked fine for me. Thats how I have always done it. But I guess there's no reason to relock if I can just flash a signed stock ROM over a custom just fine.

[PHE-NOM]

Originally Posted by D/\SH

there is no need that i can see to go back to stock occassionally? what is it really oing to do? a flash is a flash

well, i had some roms that have messed my phone up like total freezing, or running reallll slow, and i flash to different roms but the bug followed, so the only way to get back to normal was to flash stock for a few minutes, and that fixes everything. it works for me.

[D/\SH]

Originally Posted by PHE-NOM

well, i had some roms that have messed my phone up like total freezing, or running reallll slow, and i flash to different roms but the bug followed, so the only way to get back to normal was to flash stock for a few minutes, and that fixes everything. it works for me.

cool thanks for the share i will have to recommend that if someone is having these same troubles on the board or someone i know personally so i can confirm also :) good looking.

[PHE-NOM]

it works bro, i use to think the roms where bad, but now i flash stock almost always before flashing a new rom. give it a try sometime...

[7thHTC]

Is the Hard-SPL package mentioned in the directions the file SSPLManual_Raphael.zip. If not where can I find this file? And should it be done before running HSPL_037?

[D/\SH]

Originally Posted by 7thHTC

Is the Hard-SPL package mentioned in the directions the file SSPLManual_Raphael.zip. If not where can I find this file? And should it be done before running HSPL_037?

nothing this will unlock your device so you can flash custom roms..... and after that you find your rom and flash... look at my signature below and you will find a flashing tutorial... this is also a video tutorial here made by stlouisfinest on how to flash your device.

[7thHTC]

I tried running the relocker a couple of times and when it's done I go to the tricolor screen and it still says security unlocked. I'm taking my phone in tomorrow to get replaced because the keyboard is fried in it again, the rom is already back to the original stuff the comes with the phone, I just want to lock it again in case they might check for it at the store. Thanks.

[GokuSS3]

Originally Posted by 7thHTC

I tried running the relocker a couple of times and when it's done I go to the tricolor screen and it still says security unlocked. I'm taking my phone in tomorrow to get replaced because the keyboard is fried in it again, the rom is already back to the original stuff the comes with the phone, I just want to lock it again in case they might check for it at the store. Thanks.

They wont check your phone for that , most of people there dont even know how to put the phone into bootloader mode lol.... a few months back when i had to turn in my Diamond i didnt even flash back to stock they never said or knew the difference haha.

[VenumX]

Originally Posted by GokuSS3

They wont check your phone for that , most of people there dont even know how to put the phone into bootloader mode lol.... a few months back when i had to turn in my Diamond i didnt even flash back to stock they never said or knew the difference haha.

even if they did just tell em to flash it back to stock, if they dont know how just tell em it came like that... hahaha the only reason my techs know about that is because ive shown them how to flash to a different rom so when customers complain about issues with battery and stuff and have a custom rom on there they can switch them back to stock and laugh at them :P

[GokuSS3]

Originally Posted by VenumX

even if they did just tell em to flash it back to stock, if they dont know how just tell em it came like that... hahaha the only reason my techs know about that is because ive shown them how to flash to a different rom so when customers complain about issues with battery and stuff and have a custom rom on there they can switch them back to stock and laugh at them :P

Lmao you just proved that it even more haha. Or another I have used in the past show them your phone what you have done to your phone and all the things you can do there's cant. I have never had to pay insurance on my phone cause I just show them my old one , an they are amazed lol!!!

[m260gt]

wasnt working at first...then realized i had a bluetooth usb port plugged in. so i unplugged it and everything worked now! :) one day of having it and its already unlocked. lol. and i told myself i wouldnt be putting a custom rom on...

[D/\SH]

Originally Posted by m260gt

wasnt working at first...then realized i had a bluetooth usb port plugged in. so i unplugged it and everything worked now! :) one day of having it and its already unlocked. lol. and i told myself i wouldnt be putting a custom rom on...

hahahha and why would you not flash to a custom rom?

[m260gt]

haha because it was too late. im planning on flashing tonight. im looking for a good rom thats for alltel. that will let me do all the alltel things like mms with no trouble.

[jfaulkner467]

why would it be asking me to choose a program to run Raphael_CDMA_HSPL_037

[crazaytalent]

Originally Posted by jfaulkner467

why would it be asking me to choose a program to run Raphael_CDMA_HSPL_037

probably because you failed to extract it (unrar or unzip)... and what its asking you is what program to extract it.... it cant run without being extracted first... Id suggest using winrar to extract and then itll run... if you dont have that, winzip should get it down...

[jfaulkner467]

Why does it ask me to choose a program when I try to install Raphael_CDMA_HSPL_037 Please help

--------- New Post Merged on 20/7/2009 at 03:39:08 --------

I have extracted it with winrar and another file comes up and it only gives me the option to open it and then it ask me to choose

[crazaytalent]

Originally Posted by jfaulkner467

Why does it ask me to choose a program when I try to install Raphael_CDMA_HSPL_037 Please help

--------- New Post Merged on 20/7/2009 at 03:39:08 --------

I have extracted it with winrar and another file comes up and it only gives me the option to open it and then it ask me to choose

interesting... if you etracted it, you should get a folder w/ a exe. program in it... not a file... and then u run it... i suggest you try to redownload and then run again...

out of curiousity... what the file extension of the file you are getting.

[fanaticny]

Originally Posted by jfaulkner467

Why does it ask me to choose a program when I try to install Raphael_CDMA_HSPL_037 Please help

--------- New Post Merged on 20/7/2009 at 03:39:08 --------

I have extracted it with winrar and another file comes up and it only gives me the option to open it and then it ask me to choose

I just downloaded it to see what you were getting and you're not getting the right folder so it's not your fault, there's something wrong with the zip file, it has to be reupped with a new one.

[crazaytalent]

Originally Posted by fanaticny

I just downloaded it to see what you were getting and you're not getting the right folder so it's not your fault, there's something wrong with the zip file, it has to be reupped with a new one.

I just downloaded and extracted and its fine... doesnt need a re up...

make sure your downloading the right unlocker... u should be downloading "raphael_cdma_hspl_037"

[fanaticny]

Originally Posted by crazaytalent

I just downloaded and extracted and its fine... doesnt need a re up...

make sure your downloading the right unlocker... u should be downloading "raphael_cdma_hspl_037"

That's weird bc i can't really unzip it, if I use winrar then I can extract it but i get 1 file, and it should be a folder, the other guy is getting the same thing, a file and not a folder. It says it's an invalid file

Btw, I don't need this, I just wanted to see what file the other guy was getting.

[jfaulkner467]

Have you had problem with it saying you are not connected to your phone and active sync says you are

[fanaticny]

Originally Posted by jfaulkner467

Have you had problem with it saying you are not connected to your phone and active sync says you are

I assuming you were able to unzip and get the folder you need. That problems comes up sometimes, just follow the steps on the screen on how to fix it, it's really simple.

[sdwyz74]

pick up a clean pro on a trade and i ran the unlocker and it shut down my pc into some screen and told me i should restart so i did everything is fine but i put my phone in boot mode again and it says i'm unlocked but i get the error 262 when trying to flash a rom

so i know my TP is not unlocked i tried again and the same thing shuts down my PC and says for me to restart i do and it's safe but i dont want to try again does anyone know my PROBLEM ? and what i should do!

[D/\SH]

Originally Posted by sdwyz74

pick up a clean pro on a trade and i ran the unlocker and it shut down my pc into some screen and told me i should restart so i did everything is fine but i put my phone in boot mode again and it says i'm unlocked but i get the error 262 when trying to flash a rom

so i know my TP is not unlocked i tried again and the same thing shuts down my PC and says for me to restart i do and it's safe but i dont want to try again does anyone know my PROBLEM ? and what i should do!

try toredownload since i have never had troubles... ylou seem to have troubles with all these unlockers.... i would check your firewall and virus scan settings or disable during the unlock and flash and see what that does.

[MonkeYSpanK]

i've been trying to find out where i download the "Raphael_CDMA_HSPL_037.exe " file, so i can flash my touch, but i can't seem to locate it. i downloaded the Raphael_CDMA_HSPL_037.zip but its not in there (if its supposed to be) and my .net framwork is up to date too. i'm probably missing something. so any advise?

[D/\SH]

Originally Posted by MonkeYSpanK

i've been trying to find out where i download the "Raphael_CDMA_HSPL_037.exe " file, so i can flash my touch, but i can't seem to locate it. i downloaded the Raphael_CDMA_HSPL_037.zip but its not in there (if its supposed to be) and my .net framwork is up to date too. i'm probably missing something. so any advise?

its in a zip folder.... do you have winrar on your pc so you can extract it?
the files are right there in the first post attached at the bottom.

[MonkeYSpanK]

Originally Posted by D/\SH

its in a zip folder.... do you have winrar on your pc so you can extract it?
the files are right there in the first post attached at the bottom.

you i have winrar. i can unzip the file fine but inside is an empty file (Raphael_CDMA_HSPL_37) to be exact. and when i extract it and try to open it it asks what program do i want to use. thats where i get stuck.

[GokuSS3]

Originally Posted by MonkeYSpanK

you i have winrar. i can unzip the file fine but inside is an empty file (Raphael_CDMA_HSPL_37) to be exact. and when i extract it and try to open it it asks what program do i want to use. thats where i get stuck.

There is nothing to extract , open up the rar file and double click Raphael_CDMA_HSPL_37.exe and it will run on your computer.

[D/\SH]

Originally Posted by GokuSS3

There is nothing to extract , open up the rar file and double click Raphael_CDMA_HSPL_37.exe and it will run on your computer.

yuppers thats the only way to do it as the tutorials state...... you could actually extract the nbh from that and rename that to RAPHIMG.nbh and than drag it to a freshly formatted FAT32 2 gig card or less and than place the phone into manual bootload and follow the steps (the same process can be done for roms) and if you havent i would suggest that you take a look at my signature below at the tutorial on how to flash roms step by step.... in the tutorials section from the articles tab up top you will also find a vido tutorial on how to flash your touch pro.

[MonkeYSpanK]

Originally Posted by GokuSS3

There is nothing to extract , open up the rar file and double click Raphael_CDMA_HSPL_37.exe and it will run on your computer.

thats the wierd thing, when i open the zip folder the file in there has no extention. no .exe or anything.

--------- New Post Merged on 3/8/2009 at 02:46:59 --------

Originally Posted by D/\SH

yuppers thats the only way to do it as the tutorials state...... you could actually extract the nbh from that and rename that to RAPHIMG.nbh and than drag it to a freshly formatted FAT32 2 gig card or less and than place the phone into manual bootload and follow the steps (the same process can be done for roms) and if you havent i would suggest that you take a look at my signature below at the tutorial on how to flash roms step by step.... in the tutorials section from the articles tab up top you will also find a vido tutorial on how to flash your touch pro.

i tried flashing from my micro sd card, after i formatted it to FAT32. but after the bootloader screen came up a white screen that said loading stayed on. i left it for almost 20 mins but it never changed. i do feel like i'm getting closer to getting this rom installed (thx 3 u guys) :). any other ideas?

[D/\SH]

Originally Posted by MonkeYSpanK

thats the wierd thing, when i open the zip folder the file in there has no extention. no .exe or anything.

--------- New Post Merged on 3/8/2009 at 02:46:59 --------




i tried flashing from my micro sd card, after i formatted it to FAT32. but after the bootloader screen came up a white screen that said loading stayed on. i left it for almost 20 mins but it never changed. i do feel like i'm getting closer to getting this rom installed (thx 3 u guys) :). any other ideas?

reformat and try again it should start loading it immediately.

[MonkeYSpanK]

Originally Posted by D/\SH

reformat and try again it should start loading it immediately.

i did it a few times (to be exact) and it starts up quick but stops when it says loading. should i let it load longer then 20 mins maybe? it does something because when i reset it from loading i have to do a hard reset to get my touch to work right again.