Ultimate Launch V 12 [Today plug-in that sets up tabs like a cube etc]

[DASH]

“ Originally Posted by lajon007 ”

how do i change the icons to the ones i want on each turn

are you joking?!!!!!! did you read the thread even???????? the reason it is sooo long is because others like you dont read and the same questions get asked over and over again. click on the tab you want than go to change and than click new and add the apps that you want.

[ca3sar]

any way you can provide the crack were i can overite. Ive been using the trial for awhile and dont want to changes my pages by uninstalling. Also will the crack stop the not activated? You current review still shows you changing the seriall? I love it but dont want to uninstall and reinstall. Any quick crack?

[sl8dogg]

“ Originally Posted by ca3sar ”

any way you can provide the crack were i can overite. Ive been using the trial for awhile and dont want to changes my pages by uninstalling. Also will the crack stop the not activated? You current review still shows you changing the seriall? I love it but dont want to uninstall and reinstall. Any quick crack?

Quick Crack: Read Thread until you find activation instructions. Its in there several times, I promise......... Really easy to execute as well....... Happy Reading....

[ca3sar]

“ Originally Posted by sl8dogg ”

Quick Crack: Read Thread until you find activation instructions. Its in there several times, I promise......... Really easy to execute as well....... Happy Reading....

I dont see where there is any crack once you have this installed, Please read again. Im trying not to uninstall and reinstall. (pain in the ass, i have everything setup) Any crack without uninstalling?

I had the install from the original site.

[sl8dogg]

Posted via Mobile DeviceNo bro. I didnt mean read the first post where the prog is. I meant read the whole 20 some odd page thread.... Activate program with any serial number as discussed MANY times in the THREAD

[broSki]

“ Originally Posted by ca3sar ”

any way you can provide the crack were i can overite. Ive been using the trial for awhile and dont want to changes my pages by uninstalling. Also will the crack stop the not activated? You current review still shows you changing the seriall? I love it but dont want to uninstall and reinstall. Any quick crack?

you hav to download from here to get the crack, there is no way we can get you a keygen bro being that the one posted is already cracked. no quick crack, you would have to uninstall the trial version and install our version.

[sl8dogg]

“ Originally Posted by brol1k ”

you hav to download from here to get the crack, there is no way we can get you a keygen bro being that the one posted is already cracked. no quick crack, you would have to uninstall the trial version and install our version.

Right on. Hey yeah, I didnt see he got it from the website.....My bad for sounding like a dick.... Thanks brolik. I was being an ass for no reason....

Posted via Mobile Device

[ca3sar]

Yeah im advanced in this. But no harm done thanxs guys. Keep up the good work.:wink2:

You see any problems from uninstalling this>? or any good method?

[broSki]

“ Originally Posted by ca3sar ”

Yeah im advanced in this. But no harm done thanxs guys. Keep up the good work.:wink2:

You see any problems from uninstalling this>? or any good method?

nah just remove program like any other app, and then install our version thats all. and set it up like you like

[sl8dogg]

“ Originally Posted by ca3sar ”

Yeah im advanced in this. But no harm done thanxs guys. Keep up the good work.:wink2:

You see any problems from uninstalling this>? or any good method?

I uninstalled fine on the touch & reinstalled. The configs wont take you that long bro if you know what youre doing.....



Posted via Mobile Device

[littlec]

“ Originally Posted by sl8dogg ”

I uninstalled fine on the touch & reinstalled. The configs wont take you that long bro if you know what youre doing.....



Posted via Mobile Device

or you can also back up your settings.ini prior to reinstalling.

[huntingmatt418]

Everything has been working great with this app. Only problem I keep having is when I shut down for the night or do a soft reset, the htc home is running when it comes up and I have to go in and uncheck. Anyone else with this or know of a fix???

[DASH]

“ Originally Posted by huntingmatt418 ”

Everything has been working great with this app. Only problem I keep having is when I shut down for the night or do a soft reset, the htc home is running when it comes up and I have to go in and uncheck. Anyone else with this or know of a fix???

huh never heard of that happening. try to make sure that when you bring it over from the home to the laucher again that you click the ok in the top right corner.... cant think of any other reason why it would keep switching back like that on you........ also have you registered the product with digits that you want????? it might ba that you havent and that can be the problem also.

[ambriz]

I clicked on the activate plugin on startup and know my phone is frozen.......... *$#@
PLEASE HELP!!!!!!!!

[DASH]

“ Originally Posted by ambriz ”

I clicked on the activate plugin on startup and know my phone is frozen.......... *$#@
PLEASE HELP!!!!!!!!

if you read through this thread we clealr ysay not to click that or the activesync. you will have to soft reset and see if you can get into the settings and change that or if you cant get by the freezing you will have to do a hard reset.

[TOUCHED]

Any special instruction for use with HHC. Im out on the hard resets, 3 is enough now.

[DASH]

“ Originally Posted by TOUCHED ”

Any special instruction for use with HHC. Im out on the hard resets, 3 is enough now.

already been stated in here and the hhc thread that you posted it in bro. please read and search before asking.

1. uncheck UL
2. check home plugin
3. open HHC
4. make the changes you want
5. save the changes
6. uncheck the home plugin
7. recheck ultimate launch

[TOUCHED]

“ Originally Posted by D/\SH ”

already been stated in here and the hhc thread that you posted it in bro. please read and search before asking.

1. uncheck UL
2. check home plugin
3. open HHC
4. make the changes you want
5. save the changes
6. uncheck the home plugin
7. recheck ultimate launch

Sorry man, I see so much here and lots of stuff I dont understand.

[kaos]

dude if you don't understand it and can't follow the videos..then don't mess with it...

[DASH]

“ Originally Posted by kaos ”

dude if you don't understand it and can't follow the videos..then don't mess with it...

im sorry but i agree with what kaos said above bro the way i put it was in lamens terms and very easy to follow. so if you dont understand that i wouldnt mess with it.

[TOUCHED]

“ Originally Posted by kaos ”

dude if you don't understand it and can't follow the videos..then don't mess with it...

WOW, sorry not savvy with this stuff. Anyone else want to blast the non tech savvy dumba$$?

[DASH]

“ Originally Posted by TOUCHED ”

WOW, sorry not savvy with this stuff. Anyone else want to blast the non tech savvy dumba$$?

dude we aint dissing and there is no other way to explain it bro other than the way i did. all you have to do is go to start/settings/personal/today and uncheck and recheck not that hard to do......

[kaos]

“ Originally Posted by TOUCHED ”

WOW, sorry not savvy with this stuff. Anyone else want to blast the non tech savvy dumba$$?

not blasting you stating truth..the videos are step by step..if you still cant get it then not much anyone can do.this is why we offer a modding service..

[ambriz]

What is a hard reset?

[DASH]

“ Originally Posted by ambriz ”

What is a hard reset?

it returns your phone back to the stae wehn you first opened it and turned it on from the box. so you will lose all info on the phone including apps, contacts, text messages, etc.

[ambriz]

What do i do to do a hard reset.

[DASH]

“ Originally Posted by ambriz ”

What do i do to do a hard reset.

since you have the touch you will want to press and hold the green and red call and call end buttons while soft resetting with the stylus.

[ambriz]

thank you

[mustlovej]

i would like to download this program to my ppc6800 mogul
how do i go about it?
please be specfic im new to this.

[DASH]

“ Originally Posted by ambriz ”

thank you

no problem just hit the thanks button

“ Originally Posted by mustlovej ”

i would like to download this program to my ppc6800 mogul
how do i go about it?
please be specfic im new to this.

bro in the future please search before posting. look in my signature and than it will teach you how to search in one link i would read that and also read the noob guide one since that will teach you how to install files cabs and exe's.

[shuriken]

thanks kaos for the vid....finally got it working! :D

[shuriken]

is there a way to get rid of the bar at the bottom of ultimate launch?

ie the one that looks like [||||||||||||||||||||]> and <||||||||||||||||||||]>

[DASH]

“ Originally Posted by shuriken ”

is there a way to get rid of the bar at the bottom of ultimate launch?

ie the one that looks like [||||||||||||||||||||]> and <||||||||||||||||||||]>

i have no clue what you are talking bout. can you post a screen shot?

[sl8dogg]

[QUOTE=shuriken;225714 ]is there a way to get rid of the bar at the bottom of ultimate launch?

ie the one that looks like [||||||||||||||||||||]> and <||||||||||||||||||||]>[ /QUOTE]

Yeah. All mine shows is one arrow I the right. Mess with the configs in UL. Uncheck show grid and one that has to do with transparacy or sumthin like that. also maybe the refresh headers option. Its gon off mine but im not sure which setting it was. Just play around and you should be able to get it.

Posted via Mobile Device

[Psycho]

go into your UL settings, headers tab, and set height to 0 pixels, I think that is what you were talking about, hope this helps!

[sl8dogg]

“ Originally Posted by Psycho ”

go into your UL settings, headers tab, and set height to 0 pixels, I think that is what you were talking about, hope this helps!

That WILL do it, but then its hard to go back to the settings if not impossible if you deleted the UL icon that was default. I have my header at 10, but I have the whole bar transparent except for the arrow on the right. Not sure exactly which setting did it, but it seems like it happened when I wasnt expecting it to.

Posted via Mobile Device

[Psycho]

I found a nice little trick, go into your UL settings, click on home tab and hit change, be careful not to change the wrong setting. Make sure you are in the tab labeled as tab, there is an option that says "Open tab on startup" check this, and UL will automatically pop up on startup, MAKE SURE YOU ARE NOT CLICKING ACTIVATE PLUGIN ON STARTUP (that launches active sync, and freezes the phone) MAKE SURE THE OPTION SAYS VERBATIUM "Open tab on startup" that way the tab that you choose, doesn't have to be the home tab, will automatically launch on startup!

Another great thing you can do is when you have the invisible tab highlighted, you can click combine, and then go into the settings, and add things, so that now your lg buttons, effcomm, perastats, and whatever else you have on there is now a part of UL, so that you dont have to have them on every page.

[Psycho]

“ Originally Posted by sl8dogg ”

That WILL do it, but then its hard to go back to the settings if not impossible if you deleted the UL icon that was default. I have my header at 10, but I have the whole bar transparent except for the arrow on the right. Not sure exactly which setting did it, but it seems like it happened when I wasnt expecting it to.

Posted via Mobile Device

if you deleted your icon, you can go to start/programs/file explorer(or resco explorer) then navigate to my device/program files/Ultimate Launch/ and click on the ultimate launch icon that is about 221 K (if neither of your files have 221 k, just pick the one that doesn't have the windows symbol in the icon) That should open your UL Settings,

now to get your icon back, so that you can easily get to it

select any of your tabs that you have the space to put one more icon, or make a new tab.

Click new, then select "XP-Icon (32 bit) then click browse *.* and navigate to \Program Files\UltimateLaunch\UltimateLaunchConfig.exe

Then go over to the XP-Icon tab, and beside XP-Icon (normal): click on Browse, then navigate to \Program Files\UltimateLaunch\Icons and select UL.ico

This will get you back the icon for Ultimate Launch, hope this solves your issue!

[sl8dogg]

“ Originally Posted by Psycho ”

if you deleted your icon, you can go to start/programs/file explorer(or resco explorer) then navigate to my device/program files/Ultimate Launch/ and click on the ultimate launch icon that is about 221 K (if neither of your files have 221 k, just pick the one that doesn't have the windows symbol in the icon) That should open your UL Settings,

now to get your icon back, so that you can easily get to it

select any of your tabs that you have the space to put one more icon, or make a new tab.

Click new, then select "XP-Icon (32 bit) then click browse *.* and navigate to \Program Files\UltimateLaunch \UltimateLaunchConfig .exe

Then go over to the XP-Icon tab, and beside XP-Icon (normal): click on Browse, then navigate to \Program Files\UltimateLaunch \Icons and select UL.ico

This will get you back the icon for Ultimate Launch, hope this solves your issue!

Yeah, that will work if you wanna mess with all that. I got mine the way I like it though somehow without all that, but oh well...... To each his own....


Posted via Mobile Device

[Psycho]

“ Originally Posted by sl8dogg ”

Yeah, that will work if you wanna mess with all that. I got mine the way I like it though somehow without all that, but oh well...... To each his own....


Posted via Mobile Device

its not as complicated as it looks, I tried to put it into laymans terms as much as possible

[sl8dogg]

“ Originally Posted by Psycho ”

its not as complicated as it looks, I tried to put it into laymans terms as much as possible

No, what youre talking about isnt complicated, but seriously, it is a lot more complicated than it was to make it transparent.One check box... Its all good bro, lets stop crapping the thread.....


Posted via Mobile Device

[shuriken]

“ Originally Posted by D/\SH ”

i have no clue what you are talking bout. can you post a screen shot?

i took a few pics:

[shuriken]

“ Originally Posted by Psycho ”

if you deleted your icon, you can go to start/programs/file explorer(or resco explorer) then navigate to my device/program files/Ultimate Launch/ and click on the ultimate launch icon that is about 221 K (if neither of your files have 221 k, just pick the one that doesn't have the windows symbol in the icon) That should open your UL Settings,

now to get your icon back, so that you can easily get to it

select any of your tabs that you have the space to put one more icon, or make a new tab.

Click new, then select "XP-Icon (32 bit) then click browse *.* and navigate to \Program Files\UltimateLaunch\UltimateLaunchConfig.exe

Then go over to the XP-Icon tab, and beside XP-Icon (normal): click on Browse, then navigate to \Program Files\UltimateLaunch\Icons and select UL.ico

This will get you back the icon for Ultimate Launch, hope this solves your issue!

thanks, i kept this in mind and made sure i could get back to config before i changed anything.

[shuriken]

“ Originally Posted by Psycho ”

I found a nice little trick, go into your UL settings, click on home tab and hit change, be careful not to change the wrong setting. Make sure you are in the tab labeled as tab, there is an option that says "Open tab on startup" check this, and UL will automatically pop up on startup, MAKE SURE YOU ARE NOT CLICKING ACTIVATE PLUGIN ON STARTUP (that launches active sync, and freezes the phone) MAKE SURE THE OPTION SAYS VERBATIUM "Open tab on startup" that way the tab that you choose, doesn't have to be the home tab, will automatically launch on startup!

Another great thing you can do is when you have the invisible tab highlighted, you can click combine, and then go into the settings, and add things, so that now your lg buttons, effcomm, perastats, and whatever else you have on there is now a part of UL, so that you dont have to have them on every page.

useful info, thanks.

[shuriken]

“ Originally Posted by Psycho ”

go into your UL settings, headers tab, and set height to 0 pixels, I think that is what you were talking about, hope this helps!

thanks, that did it! :)

[shuriken]

[QUOTE=sl8dogg;225719]

“ Originally Posted by shuriken ”

is there a way to get rid of the bar at the bottom of ultimate launch?

ie the one that looks like [||||||||||||||||||||]> and <||||||||||||||||||||]>[ /QUOTE]

Yeah. All mine shows is one arrow I the right. Mess with the configs in UL. Uncheck show grid and one that has to do with transparacy or sumthin like that. also maybe the refresh headers option. Its gon off mine but im not sure which setting it was. Just play around and you should be able to get it.

Posted via Mobile Device

thanks for your response.

[broSki]

[QUOTE=shuriken;225824]

“ Originally Posted by sl8dogg ”

thanks for your response.

you can also make it smaller, the space we were talkin about last nite. go to the configurations of the ul launcher and go to the headers tab and make the decrease the height, I have mine on 0 instead of 20 which is what dash has on the video.

[Munchie94]

Hello,

I have the ultimate launcher installed on my phone and it works well, the problem I am having is that the clock in the launcher will not update. After a soft reset, it will get the current time, but it never changes after that. Please help...

[Balkar]

[QUOTE=sl8dogg;225719]

“ Originally Posted by shuriken ”

is there a way to get rid of the bar at the bottom of ultimate launch?

ie the one that looks like [||||||||||||||||||||]> and <||||||||||||||||||||]>[ /QUOTE]

Yeah. All mine shows is one arrow I the right. Mess with the configs in UL. Uncheck show grid and one that has to do with transparacy or sumthin like that. also maybe the refresh headers option. Its gon off mine but im not sure which setting it was. Just play around and you should be able to get it.

Posted via Mobile Device

Hey, i am using this prog and UL for me is pretty much full screen(Cube goes from top to bottom of my screen). At the bottom, i got 2-3 color so i cant just pick lets say black and have the whole bar disapear on a black background... I tried setting my header height to 0 or 1 but the damn arrows still show up. Have you found a clear way to make the arrow disapear? THe middle part isnt there, but those arrows are from hell... And on top of that, THEY DONT EVEN WORK lol!

Thanks in advance

[BigBadWolf77]

[QUOTE=Balkar;225914]

“ Originally Posted by sl8dogg ”

Hey, i am using this prog and UL for me is pretty much full screen(Cube goes from top to bottom of my screen). At the bottom, i got 2-3 color so i cant just pick lets say black and have the whole bar disapear on a black background... I tried setting my header height to 0 or 1 but the damn arrows still show up. Have you found a clear way to make the arrow disapear? THe middle part isnt there, but those arrows are from hell... And on top of that, THEY DONT EVEN WORK lol!

Thanks in advance

HEADERS
Height set to 0
Visible headers set to 1
Show Grid unchecked
Inactive tabs unchecked

FONT
Fontsize 0