TomTom7 Working On Touch!!!

TomTom 7 extracted from HTC Diamond (repack3)[/b]
Requirements: WM2003SE/WM5.x/6.x (and a good bit of free RAM)
Overview: TomTom Navigator 7 for PDA. Rebuilt installer and ready patched for use on all PDAs.

[break]

More Info:
Thread recreated due to a slight admin glitch ;-)

Ok guys, this might help a few of you out:

This freshly built cab contains TT v7.450.9028.

Hacks included:
setup.dll is patched so you can install it on anything (& its broken digital sig removed).
The program is also patched so that it will run on anything and allow keygenned maps (so you can change your hardware and use still use the maps you already bought) (& its broken digital sig removed).
Several different device types are forced allowing you a choice of colour and screen resolution.
v6 map support has been enabled on device types that aren't supposed to support it (i.e. modern PDAs are supposed to require v7 maps).

Since TomTom aren't selling this software this will help people move to newer hardware where v6 doesn't run, so you can use all those maps you already own. Remember, you should buy your maps for this (I'd say buy the software too, but you can't!).

Download Instructions:
Repack3 archive contains 3 cabs (vga (black) & qvga (blue/black)), just install the one you want.

repack3 (all versions): http://rapidshare.com/files/12454104...028_repack3.7z (uploaded by Mig-32) - supports v6 & v7 maps, vga & qvga versions (qvga available in black & blue)

Mirrors (please create some more mirrors and post a link in the thread):
http://rapidshare.com/files/12459925...028_repack3.7z (thanks to rayarcafe)
http://rapidshare.com/files/12453350...28_repack3.rar (thanks to tabarda) - note this mirror is larger due to less compression

Basic Instructions:
All you need to do is add your voices and maps.
UK voices are included in the archive (but not installed with the cab), all official voices available here: http://www.megaupload.com/?d=O0BPDK1A (thanks to mioa201)

If you need transfer maps to your new device use the keygen on the pc, run it against the map folder (v7 maps) and give it your device id (no space, uppercase), then copy the map folder to your device.
You run this in a command prompt, like this: tt7_keygen "map_folder" "deviceid"
For v6 maps activation codes use: tt6_keygen "path to .mid file" (then enter your device id when prompted)
To get your device id, run tomtom and exit. Look on your storage card for ttnavigator.bif, it will have your device id in it (DeviceUniqueID=<10chars>).

Mapshare instructions: http://forum.ppcwarez.org/viewtopic.php?f=277&t=49465

Potential Problems:
You don't know your device id: Read the instructions above, it tells you how to find it.
No sound after installing: Rename BTCoreif.dll and BtSdkCE30.dll (in your windows folder) to anything, then soft reset.
Map can't be loaded (incorrect code error): read the instructions above, you need to use the keygen to activate your map.
Large too font: use the qvga version.
Can't use v6 maps: repack3 has support for v6 maps in both vga & qvga versions, however you may also need to run this patch against the map if it was released for certain PNA devices: http://www.megaupload.com/?d=4U8UQ0GF
Doesn't run on PNA devices (out of memory error): no known solution, currently only usable on PDA devices.

[D/\SH]

“ Originally Posted by mike20pr ”

Thanks to starbase64 who shared with us a Tomtom version which works on Touch (using bluetooth gps).....

http://rapidshare.com/files/12398912...and_6.cab.html

http://www.megaupload.com/?d=6EF2ABE2


Original Thread
http://forum.xda-developers.com/showthread.php?t=402040

all we need are the maps!!!

maps needed no more here you go guys. i can confirm that these do work on the touch.

TomTom USA and Canada v720 build 1802
Requirements: TomTom 7
Overview: Map for North America (2GB) for Navcore 7


More Info:

Code

http://www.tomtom.com

Download Instructions:
meta.txt
; USA_and_Canada_720_1803
AB 26 81 FB B9 E5 82 D4 BE 4D 14 92 B5 A4 F4 4C USA_and_Canada-14.meta
Don't forget to use a TT-7 dct file generator. Here is the one I used:
http://rapidshare.com/files/12450957...CT_Builder.rar
Note PPC Version also requires the Cracked TT7 exe from HTC Diamond Rom
Links:
http://rapidshare.com/files/12470791...803.part01.rar
http://rapidshare.com/files/12470791...803.part02.rar
http://rapidshare.com/files/12470792...803.part03.rar
http://rapidshare.com/files/12470791...803.part04.rar
http://rapidshare.com/files/12470792...803.part05.rar
http://rapidshare.com/files/12471652...803.part06.rar
http://rapidshare.com/files/12471656...803.part07.rar
http://rapidshare.com/files/12471658...803.part08.rar

[Mike20PR]

woohoo!!! thanx 4 da awesome add Dash!!

[D/\SH]

“ Originally Posted by mike20pr ”

woohoo!!! thanx 4 da awesome add Dash!!

lmao you know how i do.

[rwcj63]

how does all this work? i've been using tomtom v6 for a long time and am familiar with the working of it but i have no idea what to do here. i thoght i could use my current maps with v7 but it tells me no maps when i try it.

[D/\SH]

“ Originally Posted by rwcj63 ”

how does all this work? i've been using tomtom v6 for a long time and am familiar with the working of it but i have no idea what to do here. i thoght i could use my current maps with v7 but it tells me no maps when i try it.

are you kidding!!! read through the thread including thefirst post.

[rwcj63]

nope. not kidding. the program itself isn't the issue. the maps are. i don't have a clue how to recombine them into one. when i extract them, all i get is overwritten files. the one that needs combining is the 'cline.dat' file, which in the rar file is displayed 'cline.data <->' and i'm clueless as to what that means.

[D/\SH]

“ Originally Posted by rwcj63 ”

nope. not kidding. the program itself isn't the issue. the maps are. i don't have a clue how to recombine them into one. when i extract them, all i get is overwritten files. the one that needs combining is the 'cline.dat' file, which in the rar file is displayed 'cline.data <->' and i'm clueless as to what that means.

download all parts from rapidshare
use winrar and open first folder..
take maps and add to the tom tom folder
DONE.|

[sl8dogg]

“ Originally Posted by mike20pr ”

Thanks to starbase64 who shared with us a Tomtom version which works on Touch (using bluetooth gps).....

http://rapidshare.com/files/12398912...and_6.cab.html

http://www.megaupload.com/?d=6EF2ABE2


Original Thread
http://forum.xda-developers.com/showthread.php?t=402040

all we need are the maps!!!

Anyone have any insight as to any major differences here over TOMTOM 6? If not, i'll probably try this one anyway... Cheers

[D/\SH]

“ Originally Posted by sl8dogg ”

Anyone have any insight as to any major differences here over TOMTOM 6? If not, i'll probably try this one anyway... Cheers

not sure all ive heard is that it is better...... i never used 6 so i wont be help lmao.

[sl8dogg]

“ Originally Posted by D/\SH ”

not sure all ive heard is that it is better...... i never used 6 so i wont be help lmao.

Right on. I went to igo8 becausr the maps on Tomtom 6 were a freakin storage hog. All of Canada and USA was a lot of MB.

[MattOktaNZ]

Okay.. so I did read how it said works with Touch with External GPS... does that mean it defintely won't work on the Touch with internal GPS? Garmin works fine so does TomTom not support the Intermediate driver or something?

[sl8dogg]

“ Originally Posted by MattOktaNZ ”

Okay.. so I did read how it said works with Touch with External GPS... does that mean it defintely won't work on the Touch with internal GPS? Garmin works fine so does TomTom not support the Intermediate driver or something?

I havent tried 7 yet, but 6 works fine with internal/intermediate. Gotta either prime with google maps, or do what I did and get astro launcher. I dont see why 7 would be different.

Posted via Mobile Device

[rwcj63]

“ Originally Posted by D/\SH ”

download all parts from rapidshare
use winrar and open first folder..
take maps and add to the tom tom folder
DONE.|

i guess i'm an idiot. this doesn't appear to be as straight forward as it would seem to be.

has anyone actually got the maps to work properly? if so, a detailed explaination as to how would be greatly appreciated.

[D/\SH]

“ Originally Posted by rwcj63 ”

i guess i'm an idiot. this doesn't appear to be as straight forward as it would seem to be.

has anyone actually got the maps to work properly? if so, a detailed explaination as to how would be greatly appreciated.

if it is the same as the old you just drop the maps in the tom tom folder..... you might have to make a folder namd maps and inside there though if that doesnt work.

[rwcj63]

“ Originally Posted by D/\SH ”

if it is the same as the old you just drop the maps in the tom tom folder..... you might have to make a folder namd maps and inside there though if that doesnt work.

i know where they go. like i said before, i've been working with Tom Tom v6 for quite some time. there are 8 parts to the maps themselves. most of the files are duplicates, the last file has beeen split into 8 pieces and must be reconnected. i have NO idea how. that's problem #1. problem #2 is i have no idea how to use the other code generators to make them work properly. the version 6 maps didn't have this issue.

this is a very very wonderful post and for anyone who uses TomTom, the idea of having a new version with newer maps is fantastic. however, if the posts require a PhD in computer engineering, what good does it do anyone?

but then again maybe i'm just stupid.

[sl8dogg]

Ill try this out soon and report back if I can figure it out.

[rwcj63]

“ Originally Posted by sl8dogg ”

Ill try this out soon and report back if I can figure it out.

thanks!!!

[sl8dogg]

“ Originally Posted by rwcj63 ”

thanks!!!

I was looking at your post further. As for "reconnecting" that large file, you need Winrar. Do a search here and look for the corporate edition V 3.71 I think.

Maybe that's not what you're talking about, but from what I read, that's what it sounds like. Once you DL all the files that need to be reconnected, and you have winrar installed, you right click on one of them, click on extract, and it will reassemble the split archive.

Back to topic though...

[MattOktaNZ]

“ Originally Posted by sl8dogg ”

I havent tried 7 yet, but 6 works fine with internal/intermediate. Gotta either prime with google maps, or do what I did and get astro launcher. I dont see why 7 would be different.

Posted via Mobile Device

Installed and tested successfully on Touch(Vogue).

Installed NZ maps and unlocked with "Easyusetools_for_Keygen_Mapcheck_Metacheck_ttsyst empatcher1.rar"

Verdict: Garmin seems to have more voice prompting at regular intervals.. TomTom has more useful menu options (alt. route) and can have custom nav voices. Garmin has IMO the easiest to read maps of the two and the planned route is more clearly shown.

[LOGITECH]

i still need some help. i have all the maps downloaded extracted them.......downloaded that tt dct generator from the first post. now what?????? stuck

[D/\SH]

“ Originally Posted by LOGITECH ”

i still need some help. i have all the maps downloaded extracted them.......downloaded that tt dct generator from the first post. now what?????? stuck

bro did you follow the read me if you got all them parts done take the maps and place them in the tom tom folder.

[menikfire]

Hey junkies whats up??? Hopefully one of you can help me out. I have been trying to install this “âââ⠂¬Å¡Ã‚¬Ã‚ÂÂ�TomTomâ€ÆšÃ‚Â�â€ÂÂÂ� thing in my touch but I can seem to get it right since its not working lol!!!

Ok I DL the rapidshare files form the first post and used “Winrarâà ƒÂ¢Ã¢â‚¬Å¡Ã‚¬Ã‚ÂÂ� to open the first folder, then I DL the files that DASH madeâ€ÂÂÂ�TT_Seven_DCT_B uilderâ€ÂÂÂ� and all the 8 parts of the maps as well. Now what???

What I did was I put all the 8parts of the map in the file that dash made which says “insert_meta_fro m_Map_here�. Then I transfer them to my phone in to the tomtom folder but it doesnt read them????

Tomtom works but I cant get it to read the maps??? Do I have to use Winrar to extract ALL 8 parts of the map and then transfer to phone an into tomtom folder??? Help plz!!!
i only what this program for the GPS, iT works right??? if not i dont really need this. thanks you guys!! L8TZ

[D/\SH]

“ Originally Posted by menikfire ”

Hey junkies whats up??? Hopefully one of you can help me out. I have been trying to install this “âââ⠂¬Å¡Ã‚¬Ã‚ÂÂ�TomTomâ€ÆšÃ‚Â�â€ÂÂÂ� thing in my touch but I can seem to get it right since its not working lol!!!

Ok I DL the rapidshare files form the first post and used “Winrarâà ƒÂ¢Ã¢â‚¬Å¡Ã‚¬Ã‚ÂÂ� to open the first folder, then I DL the files that DASH madeâ€ÂÂÂ�TT_Seven_DCT_B uilderâ€ÂÂÂ� and all the 8 parts of the maps as well. Now what???

What I did was I put all the 8parts of the map in the file that dash made which says “insert_meta_fro m_Map_here�. Then I transfer them to my phone in to the tomtom folder but it doesnt read them????

Tomtom works but I cant get it to read the maps??? Do I have to use Winrar to extract ALL 8 parts of the map and then transfer to phone an into tomtom folder??? Help plz!!!
i only what this program for the GPS, iT works right??? if not i dont really need this. thanks you guys!! L8TZ

yes each map has to be free and cant be in a folder or zip

[Jjday7]

you guys can flame me if you want but I have been toying with this for days and it is not working. I have downloaded all files the 8 needed and the dct. I have followed the directions in the bat files and nothing. I just cannot figure this out. Anybody got this working that can help on a step by step. I have read your post dash and everyone elses about 50 times and I just don't get it.

This is the error message I get activation failed... sorry this is no the activation code for this product usa_and_canada

[D/\SH]

“ Originally Posted by Jjday7 ”

you guys can flame me if you want but I have been toying with this for days and it is not working. I have downloaded all files the 8 needed and the dct. I have followed the directions in the bat files and nothing. I just cannot figure this out. Anybody got this working that can help on a step by step. I have read your post dash and everyone elses about 50 times and I just don't get it.

This is the error message I get activation failed... sorry this is no the activation code for this product usa_and_canada

huh very odd when i get a chance i will whip a step by step up but got a lot going on right now with trying to fix stuff on top of my normal thing....

[rwcj63]

“ Originally Posted by D/\SH ”

bro did you follow the read me if you got all them parts done take the maps and place them in the tom tom folder.

it doesn't work like that. you can't just put then in the folder and they work. they have to be decoded first. i spent hours figuring that out. the end result is a really good product with many nice changes over version 6.

[D/\SH]

“ Originally Posted by rwcj63 ”

it doesn't work like that. you can't just put then in the folder and they work. they have to be decoded first. i spent hours figuring that out. the end result is a really good product with many nice changes over version 6.

well i havent used it and would think it would have been the same instead of saying that you got them to work can you share how?

[rwcj63]

“ Originally Posted by Jjday7 ”

you guys can flame me if you want but I have been toying with this for days and it is not working. I have downloaded all files the 8 needed and the dct. I have followed the directions in the bat files and nothing. I just cannot figure this out. Anybody got this working that can help on a step by step. I have read your post dash and everyone elses about 50 times and I just don't get it.

This is the error message I get activation failed... sorry this is no the activation code for this product usa_and_canada

Installation Instructions:

1. Copy TomTom_Navigator_7.450.9028_repack1.cab (or whatever particular cracked tt7 name you have) onto your PDA and Install It.
2. Copy USA_and_Canada_720.1803 and voices to the root directory of your SD Card
3. Launch Tomtom and proceed through the setup instructions and select the USA_and_Canada map when prompted.

************************************************** ************************************
-- If the screen gives you the option to manually activate, go to 3A
-- if the screen says "Invalid map activation" and or "voucher" option, go to 3B

3A. Choose manual activation. Write down the manual activation code "XXXXX XXXXX" This is your device ID. Go to Step 4

3B. Shut down TomTom on the PDA and on your storage card, you'll find a file named "ttnavigator.bif". Copy this file to your PC and open it with Notepad, you'll see DeviceUniqueID=XXXXXXXXX about the 5th line from the top. Go to Step 4
************************************************** ************************************

4. Copy USA_and_Canada-14.meta from your PDA's USA_and_Canada_720.1803 folder into the tt7-stuff folder on your PC
5. Open a command prompt (run->cmd) and navigate to tt7-stuff

6. In the command prompt type:
tt7_keygen.exe "path to *.meta file" "DEVICEID" (NO SPACES IN THE DEVICE ID!)
Example: tt7_keygen.exe "C:\tt7-stuff" "XXXXXXXXXX"
If successful it should say "OK" and create USA_and_Canada-14.meta.dct inside tt7-stuff folder on your PC.

7.Now copy USA_and_Canada-14.meta and USA_and_Canada-14.meta.dct from tt7-stuff on your PC into USA_and_Canada_720.1803 folder on your PDA overwriting existing files.

8. Run TomTom 7 and Select the USA and Canada map. You should be good to go.

now a few extra notes:

1) the info that you got from D/\SH doesn't have the tt7-stuff folder. the name of the folder is not important as long as all the info is there. i think the one you have is "insert_meta_file_here" or something like that.

2) you need to add the info D/\SH provided right under where it says "meta.txt" in the supplied meta.txt file.

these instructions will get you where you're going. let me know if you still have problems have trying it again with these instructions.

[D/\SH]

“ Originally Posted by rwcj63 ”

Installation Instructions:

1. Copy TomTom_Navigator_7.450.9028_repack1.cab (or whatever particular cracked tt7 name you have) onto your PDA and Install It.
2. Copy USA_and_Canada_720.1803 and voices to the root directory of your SD Card
3. Launch Tomtom and proceed through the setup instructions and select the USA_and_Canada map when prompted.

************************************************** ************************************
-- If the screen gives you the option to manually activate, go to 3A
-- if the screen says "Invalid map activation" and or "voucher" option, go to 3B

3A. Choose manual activation. Write down the manual activation code "XXXXX XXXXX" This is your device ID. Go to Step 4

3B. Shut down TomTom on the PDA and on your storage card, you'll find a file named "ttnavigator.bif". Copy this file to your PC and open it with Notepad, you'll see DeviceUniqueID=XXXXXXXXX about the 5th line from the top. Go to Step 4
************************************************** ************************************

4. Copy USA_and_Canada-14.meta from your PDA's USA_and_Canada_720.1803 folder into the tt7-stuff folder on your PC
5. Open a command prompt (run->cmd) and navigate to tt7-stuff

6. In the command prompt type:
tt7_keygen.exe "path to *.meta file" "DEVICEID" (NO SPACES IN THE DEVICE ID!)
Example: tt7_keygen.exe "C:\tt7-stuff" "XXXXXXXXXX"
If successful it should say "OK" and create USA_and_Canada-14.meta.dct inside tt7-stuff folder on your PC.

7.Now copy USA_and_Canada-14.meta and USA_and_Canada-14.meta.dct from tt7-stuff on your PC into USA_and_Canada_720.1803 folder on your PDA overwriting existing files.

8. Run TomTom 7 and Select the USA and Canada map. You should be good to go.

now a few extra notes:

1) the info that you got from D/\SH doesn't have the tt7-stuff folder. the name of the folder is not important as long as all the info is there. i think the one you have is "insert_meta_file_here" or something like that.

2) you need to add the info D/\SH provided right under where it says "meta.txt" in the supplied meta.txt file.

these instructions will get you where you're going. let me know if you still have problems have trying it again with these instructions.

thank you for doing this rep given.

[rwcj63]

i didn't come up with those instructions. i was given a link to where they were. i wasn't sure if i was allowed to post where i got them from so i just copied the instructions. i'm sorry if i did anything wrong with that. i just knew all the trouble i was having and wanted to help anyone else who was having the same troubles i was.

[D/\SH]

“ Originally Posted by rwcj63 ”

i didn't come up with those instructions. i was given a link to where they were. i wasn't sure if i was allowed to post where i got them from so i just copied the instructions. i'm sorry if i did anything wrong with that. i just knew all the trouble i was having and wanted to help anyone else who was having the same troubles i was.

its all good at least you posted them up and all and edited the first post also... thanks sooooo much for the contribution.

[uboy187]

the links are not working am i too late or can some1 reup

[D/\SH]

“ Originally Posted by uboy187 ”

the links are not working am i too late or can some1 reup

ill reup after work if i can remember too but you can also go to the xda developers link and get it there.

[ataxia1]

Thanks for posting the new link when you have time. Appreciate the help.

[D/\SH]

“ Originally Posted by ataxia1 ”

Thanks for posting the new link when you have time. Appreciate the help.

here you go updated the first post for you. many changes to the app and making it easier to install also comes with full instructions so see first post.

[lowpro3210]

EDIT: GOT IT WORKING, thanks!

[hueman84]

I have just spent about an hour trying to type the commands correctly in order to generate the dct.

It's not working for reasons I dont know why. It just says "Can't find 'North_America_720.1803\*,meta' file

I put the map folder on my storage card, I took out the ttnavigator file to find my DeviceID "AB2HJAMUMJ", then I typed everything in cmd like the instructions said to, and it just isnt working...any idea how I can make this work?

[rwcj63]

“ Originally Posted by hueman84 ”

I have just spent about an hour trying to type the commands correctly in order to generate the dct.

It's not working for reasons I dont know why. It just says "Can't find 'North_America_720.1803\*,meta' file

I put the map folder on my storage card, I took out the ttnavigator file to find my DeviceID "AB2HJAMUMJ", then I typed everything in cmd like the instructions said to, and it just isnt working...any idea how I can make this work?

on this first page of this post, D/\SH has added some information that needs to be added to the meta file. without that information added, it won't work.

[hueman84]

“ Originally Posted by rwcj63 ”

on this first page of this post, D/\SH has added some information that needs to be added to the meta file. without that information added, it won't work.

I'm sorry but I dont see what part you are talking about. There is another rapidshare link to a DCT builder, which is down for having illegal content. That's all I can see that is different than anything else I have followed. It seems that file would be EXTREMELY helpful to me, considering the DCT file is the file I need to create.

[rwcj63]

“ Originally Posted by hueman84 ”

I'm sorry but I dont see what part you are talking about. There is another rapidshare link to a DCT builder, which is down for having illegal content. That's all I can see that is different than anything else I have followed. It seems that file would be EXTREMELY helpful to me, considering the DCT file is the file I need to create.

i made the new DCT file for you (using "AB2HJAMUMJ"). download the zip i attached here and extact the DCT file out of it. it should work for you.

[hueman84]

“ Originally Posted by rwcj63 ”

i made the new DCT file for you (using "AB2HJAMUMJ"). download the zip i attached here and extact the DCT file out of it. it should work for you.

Thank you so much, I will try this out and let you know how it goes.

[hueman84]

yea still doesnt work...I really just have no idea what I am doing wrong. I copied the file you gave me to my North_America_720.1803 folder on my SD Card, but it still isnt working.

I might just upgrade my Sd Card to one with a higher capacity (2GB to 8GB) and just try installing the Garmin GPS software :( So sad because I already have everything set up for TomTom, but it just wont activate.

[rwcj63]

“ Originally Posted by hueman84 ”

yea still doesnt work...I really just have no idea what I am doing wrong. I copied the file you gave me to my North_America_720.1803 folder on my SD Card, but it still isnt working.

I might just upgrade my Sd Card to one with a higher capacity (2GB to 8GB) and just try installing the Garmin GPS software :( So sad because I already have everything set up for TomTom, but it just wont activate.

are you sure about the code you got from ttnavigator.bif? if the code was wrong, the crack's not going to work.

PM me and tell me exactly what you did. We should be able to get it working.

[rwcj63]

“ Originally Posted by hueman84 ”

yea still doesnt work...I really just have no idea what I am doing wrong. I copied the file you gave me to my North_America_720.1803 folder on my SD Card, but it still isnt working.

I might just upgrade my Sd Card to one with a higher capacity (2GB to 8GB) and just try installing the Garmin GPS software :( So sad because I already have everything set up for TomTom, but it just wont activate.

i have attached the revised meta.txt file with the info added from D/\SH. try the tt7_keygen again with this file in the directory. it should find the map data and create a new DCT file for you. perhaps being created from the files off your computer will fix the problem.

keep me posted.

[iTouch24]

anyone have an updated link for voices.. the one on first post is no longer available

[D/\SH]

“ Originally Posted by iTouch24 ”

anyone have an updated link for voices.. the one on first post is no longer available

i will see what i can find for you.

[iTouch24]

How to find your DeviceID?
1 When you run TomTom7 on your PPC before Cㄒαcк the map, it will ask you to active this map, choose manual active and you'll see your DeviceID;
or
2 You just shut down the TomTom. And On your storage card, you'll find a file" ttnavigator.bif" once you run TomTom7. Copy this file to your PC and open it with Notepad, you'll see DeviceUniqueID=AB645CDEE83(for example) on the 5 lines.

[iTouch24]

anyone have the keygen again ?
i am guessing it is in this link which doesnt work since that site has been down for some time
Mapshare instructions: http://forum.ppcwarez.org/viewtopic.php?f=277&t=49465

[iTouch24]

i was able to load and find keygen ...

now tomtom is just not detecting my internal GPS .. anyone know why or what needs to be done ...?