[HTC-PRO] [Update 04/02/09] ATR 30 Manila/Rhodium Touch Pro TF3D2(build 21028)

[tr0s]

“ Originally Posted by Moebius ”

Have you tried a re-flash yet? Also, you might want to check ##DATA# to verify the active profile is set to 1.

see i don't remember even having to mess with that with my 6800 or 6900. however when i change it to a 1 my username field is still blank and it gives me flack about bad username. so far the 0 and 1 haven't made the difference in connecting. i just now hard reset it again and reprogrammed my number into it, if this doesn't work i'll flash back to stock i suppose and get it back and running. sucks cuz i really like the look of this rom.

[D/\SH]

“ Originally Posted by tr0s ”

see i don't remember even having to mess with that with my 6800 or 6900. however when i change it to a 1 my username field is still blank and it gives me flack about bad username. so far the 0 and 1 haven't made the difference in connecting. i just now hard reset it again and reprogrammed my number into it, if this doesn't work i'll flash back to stock i suppose and get it back and running. sucks cuz i really like the look of this rom.

have you gone to settings and used the update feature and see if that gets the internet working for you?

[tr0s]

if you mean the update profile, yes with no luck. that's when it gives me the error code 407. "The profile update could not be completed. Please try again later. If the problem persists, you may need to contact Customer Service." This one is a new one to me.

[Moebius]

“ Originally Posted by tr0s ”

see i don't remember even having to mess with that with my 6800 or 6900. however when i change it to a 1 my username field is still blank and it gives me flack about bad username. so far the 0 and 1 haven't made the difference in connecting. i just now hard reset it again and reprogrammed my number into it, if this doesn't work i'll flash back to stock i suppose and get it back and running. sucks cuz i really like the look of this rom.

I went through something similar a while back when I first got my TP. It ended up taking a Tier3 rep (or whatever they call them) from Sprint to walk me through a reset that I can't remember now (it was one of the ## codes, but don't remember which or where) that basically flattened the phone back to factory state including the msl data and everything. We provisioned from there and it started working like a charm.

[ronaldsdv]

“ Originally Posted by tr0s ”

if you mean the update profile, yes with no luck. that's when it gives me the error code 407. "The profile update could not be completed. Please try again later. If the problem persists, you may need to contact Customer Service." This one is a new one to me.

I had the same problem at one point and I had to put it back to the stock rom and reload the ATR .... ever since then I did not do a PRL or profile update and I got my internet working just fine.

“ Originally Posted by Moebius ”

I went through something similar a while back when I first got my TP. It ended up taking a Tier3 rep (or whatever they call them) from Sprint to walk me through a reset that I can't remember now (it was one of the ## codes, but don't remember which or where) that basically flattened the phone back to factory state including the msl data and everything. We provisioned from there and it started working like a charm.

When I called them they were unable to help me at all .... they did the remote setup, I did reprogramming, HR, SR, and a newer way they had to HR the phone .... none of them work.... so I did what I stated in the previous quotation, and it worked for me.

[medic88]

“ Originally Posted by TaylorWckediden ”

confirmed it does work with Telus, just install carrier cab after flash and HR.

The only Carrier Cab i could find was for the Titan. Will this work on the Pro?

[jr5416]

“ Originally Posted by medic88 ”

The only Carrier Cab i could find was for the Titan. Will this work on the Pro?

Yes this will work for the pro .

[broSki]

“ Originally Posted by tr0s ”

if you mean the update profile, yes with no luck. that's when it gives me the error code 407. "The profile update could not be completed. Please try again later. If the problem persists, you may need to contact Customer Service." This one is a new one to me.

Flash back to stock, acquire an internet connection, then flash back to atr and u should be good

“ Originally Posted by medic88 ”

The only Carrier Cab i could find was for the Titan. Will this work on the Pro?

in the wm application location there is taylors tweaks thread, dl your carriers cab and then install it and u should be good

[Sparkhawk]

“ Originally Posted by crensmeyer ”

I am also having the same battery drain that was mentioned, almost down to the exact percentage and time of day it plays out. I do Direct Push to an Exchange server with updates "as they arrive" from 7a to 10p every day and "manually" at all other times, but I also did this prior to flashing to this ROM.

Sorry to jump on the bandwagon, but it seems to be an issue. I also have this issue. I have done the registry edit to shut down connections after 60 seconds. Love this ROM you guys rock, but this battery thing is rough.

[PHE-NOM]

“ Originally Posted by Sparkhawk ”

Sorry to jump on the bandwagon, but it seems to be an issue. I also have this issue. I have done the registry edit to shut down connections after 60 seconds. Love this ROM you guys rock, but this battery thing is rough.

wow! that is the weirdest thing that you guys are having those problems, since this rom is actually one,if not, the best in battery life.....i say you re-flash, make sure you pull battery out for 1 minute, and hartd reset, than see if you still have that problem.

[Sparkhawk]

“ Originally Posted by NINE'SICKS ”

bro.. that rom already has a thread on this site please post comments to it over there not in this thread..
also it maybe a nice rom now but well see what happens when we drop ATR3 PLATINUM EDITION 6.5

can't wait for ATR PE!!! Your mouse pic almost made me pi$$ my pant. Nice!

--------- New Post Merged on 25/4/2009 at 05:58:42 --------

“ Originally Posted by PHE-NOM ”

wow! that is the weirdest thing that you guys are having those problems, since this rom is actually one,if not, the best in battery life.....i say you re-flash, make sure you pull battery out for 1 minute, and hartd reset, than see if you still have that problem.

Reflashing now. I did pull the battery last time but what the hell it only takes a few minutes. Hopefully it will fix 2 other tiny issues I have.
1 op mon does not hold
2 battery indicator does not work at all.

I'll let you know how it goes.

[lordhelmet]

“ Quote ”

Reflashing now. I did pull the battery last time but what the hell it only takes a few minutes. Hopefully it will fix 2 other tiny issues I have.
1 op mon does not hold
2 battery indicator does not work at all.

I'll let you know how it goes.

As far as Opmon goes, it has not worked well for me since owning a TPro. It worked well on my Mogul only. Do a search for a program called "Personalizer." That works well for me. And as far as the battery indicator, didn't have any issues w that w ATR. If the re-flash don't work, what exactly does the battery indicator not do? There are different solutions for that because overall, there are different bugs that come up with the battery indicator on different ROMs. And Hard Reset a couple of times after flash.

[PHE-NOM]

“ Originally Posted by Sparkhawk ”

can't wait for ATR PE!!! Your mouse pic almost made me pi$$ my pant. Nice!

--------- New Post Merged on 25/4/2009 at 05:58:42 --------



Reflashing now. I did pull the battery last time but what the hell it only takes a few minutes. Hopefully it will fix 2 other tiny issues I have.
1 op mon does not hold
2 battery indicator does not work at all.

I'll let you know how it goes.

the battery thing is normal for some people, i myself had that little problem, but thats why they posted the task bar zip. opmon works on my pro, huh? thats weird...., did you set the timer to 1? or interval i mean, to 1?

[mikewhooo]

Okay I have flashed both versons of this rom. they are both great smooth fast but I can not get the intenet to work flashed them both 3 times each hard reset them a couple times i have read like 40 pages in this thread looking for a soultion after the first 20 pages it all runs together any help will be great. Had to go back stock for now

[D/\SH]

“ Originally Posted by mikewhooo ”

Okay I have flashed both versons of this rom. they are both great smooth fast but I can not get the intenet to work flashed them both 3 times each hard reset them a couple times i have read like 40 pages in this thread looking for a soultion after the first 20 pages it all runs together any help will be great. Had to go back stock for now

dont know internet always works fine for me after atr flash

[PHE-NOM]

“ Originally Posted by mikewhooo ”

Okay I have flashed both versons of this rom. they are both great smooth fast but I can not get the intenet to work flashed them both 3 times each hard reset them a couple times i have read like 40 pages in this thread looking for a soultion after the first 20 pages it all runs together any help will be great. Had to go back stock for now

hey try this, go to start/settings/connections/connections/advance, and make sure both boxes read "sprint". dont know what else to say bro, sorry. you flashed back to stock, so that should have fixed it......

[mikewhooo]

yea works fine on stock rom even talk to tech they walked me threw and tried to manuelly set it up still didnt work

[dlascorpio21]

personalizer 2.0 works perfectly fine you dont have to set anything besides what u want it to say

[Sparkhawk]

“ Originally Posted by mikewhooo ”

Okay I have flashed both versons of this rom. they are both great smooth fast but I can not get the intenet to work flashed them both 3 times each hard reset them a couple times i have read like 40 pages in this thread looking for a soultion after the first 20 pages it all runs together any help will be great. Had to go back stock for now

I remember reading another person had this issue. I think his fix was to reflash stock ROM then reflash this. That was the last I heard. I'm guessing it worked. If your thinking screw that takes too much time, think again. This ROM is well worth that step. Hope this helps.

--------- New Post Merged on 26/4/2009 at 02:47:00 --------

“ Originally Posted by PHE-NOM ”

the battery thing is normal for some people, i myself had that little problem, but thats why they posted the task bar zip. opmon works on my pro, huh? thats weird...., did you set the timer to 1? or interval i mean, to 1?

Lordhelmet thanks for your ides!! phe-nom, got opmon working using your method. I read this whole thread and must have missed the fact that the taskbar zip was posted for rhodium. I thought it was for the non rhodium build. I got a semi now as everything is fixed!! AWESOMENESS!!!

[mikewhooo]

i have flashed and reflashed again it tells me error code 407 when i try to go to the internet

[D/\SH]

“ Originally Posted by mikewhooo ”

i have flashed and reflashed again it tells me error code 407 when i try to go to the internet

ok the number means nothing to me as far as support..... what did the rest of the error code say so i can further assist you?

[dlascorpio21]

same here...i even went back to stock...flashed and still get error code 407, only works when its connected to pc thru activesync, also my pic mail stopped working now, can send but can't receive anymore?

[D/\SH]

“ Originally Posted by dlascorpio21 ”

same here...i even went back to stock...flashed and still get error code 407, only works when its connected to pc thru activesync, also my pic mail stopped working now, can send but can't receive anymore?

you need the newest version of arcsoft mms for your provider and that will be fixed.

[dlascorpio21]

ok it so it does it when trying to connect to the internet and update prl... "PRL could not be updated. Please try again later. If the problem persists, you may need to contact Customer service. Error code 407."

--------- New Post Merged on 26/4/2009 at 11:48:15 --------

oh do you have the link?

[D/\SH]

“ Originally Posted by dlascorpio21 ”

ok it so it does it when trying to connect to the internet and update prl... "PRL could not be updated. Please try again later. If the problem persists, you may need to contact Customer service. Error code 407."

--------- New Post Merged on 26/4/2009 at 11:48:15 --------

oh do you have the link?

do you have the newest prl that was released about a week or so ago? if your unsure i would call them and ask them to send you the newest prl update via your phone and they will do so and it only takes 15 minutes or so max by time they are done and send the code out.

[Moebius]

“ Originally Posted by dlascorpio21 ”

same here...i even went back to stock...flashed and still get error code 407, only works when its connected to pc thru activesync, also my pic mail stopped working now, can send but can't receive anymore?

Were you able to get internet while on the stock rom? If not, I'd suggest flashing back to it and getting on with Sprint support and keep pushing until they escalate you. I've been trying to remember what ended up happening, but the guy I finally talked to had me do a ##code I wasn't familiar with, then a reset from there. After the phone reset, we re-provisioned it and all was happy. According to him whichever code it was resets pretty much everything back to factory state, not just the rom.

[dlascorpio21]

yea ##786# thing is master reset, doesnt remove rom just all settings and themes and stuff...which is what im about to do that way i can get my picture mail back again..

[mikewhooo]

finally going flased it back to stock then reflashed aging 2 hard resets

[dlascorpio21]

installed,runs beautifully, lovin it, nominated, thanked im satisfied just want blow horn and fart machine lol.........GREAT WORK!

[jr5416]

hey guys i flashed to this rom like a month ago ant cant get the ATR welcome sceen off its there a way i can do that ,i flashed a couple times already but still dont go away .Thanks

[dlascorpio21]

i kno when i was stuck with big jews welcome screen i had to manually change it thru advanced config..worked for me and i put my own custom ichigo one in there....it allowed me to change both the welcome and splash screens manually

[Sparkhawk]

“ Originally Posted by jr5416 ”

hey guys i flashed to this rom like a month ago ant cant get the ATR welcome sceen off its there a way i can do that ,i flashed a couple times already but still dont go away .Thanks

This has been discussed. If you are no longer using this rom, reflash stock rom then it will be gone. There is also a program you can flash that gets rid of it. Do a search.

--------- New Post Merged on 27/4/2009 at 05:45:40 --------

Has anyone noticed you can't cut, copy, or paste in the calender? Not a huge deal but I use it a lot so it is a bit annoying. Also, I had no need for the keyboard fix until I added a theme. Once I did that I had to use the classic word completion cab. Again not a big deal since there is a fix for it. Thought that might be helpful on the next build.:unknw_mini: I had to reinstall the word completion cab again after installing a game last night?

--------- New Post Merged on 27/4/2009 at 11:03:42 --------

Hope this auto merges couldn't find edit. I just had to reinstall the keyboard cab again. I haven't added or removed any programs. I have the cab on my card for an easy fix, but does anyone have an idea as to why that would just quit working.

As far as battery life is concerned. I had problems and did a reflash. I took my phone off the charger at 10 am. I would have to call my usage heavy since I use it for business. 10 pm now and still have 20%.

[Sparkhawk]

Did everyone forget about this rom?

[CYBER WEESJE]

“ Originally Posted by Sparkhawk ”

Did everyone forget about this rom?

hi WHAT FORGET THIS whe have all lifes job ectra so be patience and taylor or one of the staff will ancer this when the have a chance oke


GRTZ WEESJE
MODERATOR@Wckediden

[Moebius]

“ Originally Posted by Sparkhawk ”

Hope this auto merges couldn't find edit. I just had to reinstall the keyboard cab again. I haven't added or removed any programs. I have the cab on my card for an easy fix, but does anyone have an idea as to why that would just quit working.

Certain applications that are designed to force it into number mode will "break" that fix. Editing contacts is one I know of off the top of my head. The good thing is all you have to do is re-run the classic word completion cab to fix it. Doesn't even require a soft reset. I remember reading some posts around the web on it where someone was thinking of writing a mortscript or some manner of app to watch the registry key and just switch it back whenever it changes. Never saw if anyone did though.

Bottom line, whenever it happens just re-run the cab and you'll be good to go.

[TaylorSPJ]

“ Originally Posted by Sparkhawk ”

Did everyone forget about this rom?

not sure what u mean by this??? elaborate please.

[Sparkhawk]

“ Originally Posted by weesje ”

hi WHAT FORGET THIS whe have all lifes job ectra so be patience and taylor or one of the staff will ancer this when the have a chance oke


GRTZ WEESJE
MODERATOR@Wckediden

Not impatient at all was just really surprised how quiet things were.

--------- New Post Merged on 28/4/2009 at 08:50:40 --------

“ Originally Posted by TaylorWckediden ”

not sure what u mean by this??? elaborate please.

Just amazed at how quiet things were in here.

--------- New Post Merged on 28/4/2009 at 08:54:18 --------

“ Originally Posted by Moebius ”

Certain applications that are designed to force it into number mode will "break" that fix. Editing contacts is one I know of off the top of my head. The good thing is all you have to do is re-run the classic word completion cab to fix it. Doesn't even require a soft reset. I remember reading some posts around the web on it where someone was thinking of writing a mortscript or some manner of app to watch the registry key and just switch it back whenever it changes. Never saw if anyone did though.

Bottom line, whenever it happens just re-run the cab and you'll be good to go.

Exactly what I was wondering!! Thanks for the answer!! I keep it on my memory card for exactly that purpose. Not a big deal, just wanted to know why.

[TaylorSPJ]

“ Originally Posted by Sparkhawk ”

Not impatient at all was just really surprised how quiet things were.

--------- New Post Merged on 28/4/2009 at 08:50:40 --------



Just amazed at how quiet things were in here.

--------- New Post Merged on 28/4/2009 at 08:54:18 --------



Exactly what I was wondering!! Thanks for the answer!! I keep it on my memory card for exactly that purpose. Not a big deal, just wanted to know why.

not sure why its quiet but no big....and to avoid auto merges from now on, just use the multi qoute feature on each post u wish to qoute and u wont have auto merge...

[streetnExx]

flashing back to this rom, man i like ths ROM lol

[crensmeyer]

Any news on when Platinum might drop???

[TaylorSPJ]

“ Originally Posted by crensmeyer ”

Any news on when Platinum might drop???

https://www.wckediden.com/showthread...405#post365405

[claudius]

I'm having some trouble wit this the time on my phone is wrong and the wrong batterry life is showing and the tfl3d2 is not playing war should I do

[TaylorSPJ]

“ Originally Posted by claudius ”

I'm having some trouble wit this the time on my phone is wrong and the wrong batterry life is showing and the tfl3d2 is not playing war should I do

battery issue was discussed in the orginal thread in BIG BOLD LETTERS......as well as the time issue, been discussed on EVERY SITE for ppc's......all fixes are posted in this thread as well....lol where have u been???

[Garonfilms]

Great post bro 5 stars :glasses1:

[madskills384]

How do you get the ATR3 off the welcome screen or the screen when u restart your phone? I tried flashing to a different ROM didn't work. So i then tried flashing to the stock ROM didn't work.

[NINE'SICKS]

This has been discussed many times bfor, the image was cook into the rom the only way to get it off is to flash to a rom that has the image u want, then flash to the rom u want to use..

[TaylorSPJ]

“ Originally Posted by madskills384 ”

How do you get the ATR3 off the welcome screen or the screen when u restart your phone? I tried flashing to a different ROM didn't work. So i then tried flashing to the stock ROM didn't work.

i beleive a few pages back I posted a splash screen nbh file.....you basically are going to reflash the radio boot.....it wont HR ur phone or anything.....or u can build a nbh file to flash with any picture you want...its actually pretty easy to do.....but im not ganna go into details about it.....google is your friend.

[madskills384]

“ Originally Posted by TaylorWckediden ”

i beleive a few pages back I posted a splash screen nbh file.....you basically are going to reflash the radio boot.....it wont HR ur phone or anything.....or u can build a nbh file to flash with any picture you want...its actually pretty easy to do.....but im not ganna go into details about it.....google is your friend.

You wouldn't happen to have a link that give me instrutions on how to do that would???

[TaylorSPJ]

“ Originally Posted by madskills384 ”

You wouldn't happen to have a link that give me instrutions on how to do that would???

Code

http://www.google.com

sorry bro, i learned on my own.....but i know ive seen some threads on other site....google will find it for u though...

[scott8813]

Alright I know that the mainscreen clock issue has been clucked to death but I thought that there might be a few others out there (myself being one) that the fixes still for some odd reason didn't work. Well I may have found a possible solution for us less fortunate who love the hell out of this rom but can't stand the clock issue

CHECK THIS OUT

https://www.wckediden.com/showthread...412#post366412

This is a newly released version of a program called chronos. It may seem like another clock/alarm program like the thousands of others BUT it has one new feature to it. It is able to use radio signaled atomic clock settings to updatte your devices time. I just uploaded it and haven't tried it but am about to. I would appreciate any feedback to see if this is working for others as well.