WMWifiRouter v1.01

[D/\SH]

WMWifiRouter v1.01
Requirements: PPC WM5, WM6 - Any Windows Mobile Pocket PC with WiFi connection
Overview: WMWifiRouter is a tool to use your Windows Mobile 6 (possibly 5) as a WiFi <-> GPRS/UMTS/HSPA router. It'll allow you to use WiFi capable devices to connect to the internet through your phone's data connection.
WMWifiRouter is a tool that turns your Windows Mobile device into almost an Access Point. Almost, because it uses an Ad-Hoc (computer-to-computer) connection instead of infrastructure mode. It’s purpose is the same though: allow your WiFi-enabled devices to use your WM device’s data connection to connect to the internet

Get online with any device anywhere.
WMWifiRouter instantly turns your wifi enabled smartphone* into a wireless internet hotspot. Now you can use your laptop and any other device with wifi to get online and surf, email, instant message, and anything else you normally use the internet for!
* check for requirements below

What Do I Need?
To use WMWifiRouter you need the following on your mobile device*:
- Windows Mobile 5 AKU 3.3 or newer or Windows Mobile 6
- Both a wifi and a cellular data connection
- An installed and working version of Internet Sharing**
- 15 MB of free device memory

More Info:
Code:
http://www.wmwifirouter.com/consumer/

Download Instructions: Users of WMWifiRouter version 0.91 and earlier should uninstall it before installing this version, to prevent conflicts.

For some users the normal versions do not install correctly.
There are modified versions of the installer below: ActiveSync - CAB
Note that you should only use these modfied installers if you are having installation issues!

HERE IS A UPDATED VERION WMWIFIROUTER: V.1.03 5/6/08

http://rapidshare.com/files/11583209...outer.zip.html
Complete with serial
Use Serial to Activate

Serial http://rapidshare.com/files/104687098/Serial.txt

ActiveSync http://rapidshare.com/files/10468348...uter-v1.01.exe
Cab http://rapidshare.com/files/10468348...uter-v1.01.cab
ActiveSync http://rapidshare.com/files/10468348...ter-v1.01i.exe (MODDED VERSION! SEE ABOVE)
Cab http://rapidshare.com/files/10468348...ter-v1.01i.cab (MODDED VERSION! SEE ABOVE)

[sracercelica]

If I access the internet through my laptop with this, will sprint know and charge me more?

[D/\SH]

Originally Posted by sracercelica

If I access the internet through my laptop with this, will sprint know and charge me more?

no they wont because you are technically running off of wifi... at least thats the way that i understand it and all....i dont use the app personally but if someone wants to chime in and help that would be great.

[beastman]

I've used the prior version of WMWifiRouter this past month. When my bill posts, I will let you all know if they charge extra.

[BiG JeW]

If you have the unlimited data internet pack on your phone, you will notbe charged!! I use this app religiously, Never been charged...ENJOY!

[beastman]

I didn't use it excessively last month but did use it. No charge to my latest bill.

[D/\SH]

Originally Posted by beastman

I didn't use it excessively last month but did use it. No charge to my latest bill.

thanks for the update shouldnt charge anyone with the unlimited data package....

[sracercelica]

Im going to download this when I get home. Can anyone tell me if this is better than PDA Net? speedwise? I know that for the 15 min that I got pdanet to work it was impressively fast (faster than my home dsl).

[D/\SH]

Originally Posted by sracercelica

Im going to download this when I get home. Can anyone tell me if this is better than PDA Net? speedwise? I know that for the 15 min that I got pdanet to work it was impressively fast (faster than my home dsl).

this si blazing fast and up to 2 times faster than pdanet im using this right now.

[sracercelica]

Originally Posted by D/\SH

this si blazing fast and up to 2 times faster than pdanet im using this right now.

cool cant wait to try.

By the way have you ever had any overheating issues? I checked out their website and it said that sometimes it will overheat if you have the phone charging while routing and you have to wait 12 hrs. :(

[BiG JeW]

i personally never ran into the phone overheating to the point i had to wait for 12hrs. The phone does get above normal temp when pluged in and charging, but never overheated OR locked up!

[D/\SH]

Originally Posted by BiG JeW

i personally never ran into the phone overheating to the point i had to wait for 12hrs. The phone does get above normal temp when pluged in and charging, but never overheated OR locked up!

i myslef havent ever heard this or seen this happen and i used it for hours straight.

[TweetyBear]

thanks for this app. been looking for it like forever.

EDIT: also, do you recommend installing to phone or sd card?

[D/\SH]

Originally Posted by TweetyBear

thanks for this app. been looking for it like forever.

EDIT: also, do you recommend installing to phone or sd card?

phone for sure i install all my apps to the phone and never to the car.

[TweetyBear]

Originally Posted by D/\SH

phone for sure i install all my apps to the phone and never to the car.

ok. i'll trust ya on this one lol. loving this app

[JDMSOHC]

after i erased this off my phone, upon soft reset an error message pops up before phone even fully restores saying that it cant find file "wmwr_cprog", an than i have to hit the LG prada phone button, or goto CommManager and manually turn my phone on now... Wasnt doin this before i erased wmwifirouter, now it is... Whats the deal..?? I've cleared all wmwifi files that i could find on my phone, went into registry searchin around an seems like its all gone, so why is it still lookin for that file..??

[D/\SH]

Originally Posted by JDMSOHC

after i erased this off my phone, upon soft reset an error message pops up before phone even fully restores saying that it cant find file "wmwr_cprog", an than i have to hit the LG prada phone button, or goto CommManager and manually turn my phone on now... Wasnt doin this before i erased wmwifirouter, now it is... Whats the deal..?? I've cleared all wmwifi files that i could find on my phone, went into registry searchin around an seems like its all gone, so why is it still lookin for that file..??

because you didnt erase all the files on the phone. there is still some trace somewhere in the registry program files or the windows folder.

[broSki]

This app is simply wonderful bro, I was using pdanet and left that as soon as I saw this. I got a question tho: I notice my internet sharing opens whenever I connect, is this normal? B/c if i hit disconnect in the internet sharing it just disconnects me from everything.


Also dash, I ws having some trouble configuring some options and I asked jew for help so I found this video on youtube and he describes how to configure everything in the simplest terms, so if you want you can add to 1st post also, wmwifiRouter

[TweetyBear]

Originally Posted by broSki

This app is simply wonderful bro, I was using pdanet and left that as soon as I saw this. I got a question tho: I notice my internet sharing opens whenever I connect, is this normal? B/c if i hit disconnect in the internet sharing it just disconnects me from everything.


Also dash, I ws having some trouble configuring some options and I asked jew for help so I found this video on youtube and he describes how to configure everything in the simplest terms, so if you want you can add to 1st post also, wmwifiRouter

wifirouter uses internet sharing so it has to be on. you can't turn it off. hope that helped

[Mandingo]

Loving the app. JUst one more Knife in the Iphone. Still trying to figure out if i can create a secure connection. so that no one else can leech off my phone?

[BiG JeW]

Dont think it is possilbe as i have tried securing with both WEP and other methods. I had no luck ... it tell me when accessing the network from the pc to type the pw or secutity code in and no matter how simple a make the code, the computer doesnt accept it. If anyone knows if a way to secure please let us know.! Thanks!

[BiG JeW]

Dont think it is possible as i have tried securing with both WEP and other methods. I had no luck ... it tell me when accessing the network from the pc to type the pw or security code in and no matter how simple a make the code, the computer doesn't accept it. If anyone knows if a way to secure please let us know.! Thanks!



Sorry for the DOUBLE POST!! Wckediden site told me a had to wait 30sec before posting, I did wait and then it posted twice. PLEASE FORGIVE! LMAO!

[D/\SH]

Originally Posted by BiG JeW

Dont think it is possible as i have tried securing with both WEP and other methods. I had no luck ... it tell me when accessing the network from the pc to type the pw or security code in and no matter how simple a make the code, the computer doesn't accept it. If anyone knows if a way to secure please let us know.! Thanks!



Sorry for the DOUBLE POST!! Wckediden site told me a had to wait 30sec before posting, I did wait and then it posted twice. PLEASE FORGIVE! LMAO!

lol no problem bro

[broSki]

to secure it just go to setting/connections/Wi-Fi and once your on it, click and hold on the name of your network and hit edit,after it will bring you to a page that says network name and connects to etc.... hit next, on this page is where you will go to where it says data encryption and select the drop down and select WEP, when you select WEP under that just type in the network key you want and hit next then finish and your set.

Now for my question:
in the configure wireless networks page, we have to select only computer-to-computer, but the thing is that selection wont stay like that, when i exit out and use wmwifi and disconnect and then lets say tomorrow i want to use it again, and i open the config wireless networks page again just to check its set at only access points...does this happen to anybody or what?

[TweetyBear]

Originally Posted by broSki

to secure it just go to setting/connections/Wi-Fi and once your on it, click and hold on the name of your network and hit edit,after it will bring you to a page that says network name and connects to etc.... hit next, on this page is where you will go to where it says data encryption and select the drop down and select WEP, when you select WEP under that just type in the network key you want and hit next then finish and your set.

Now for my question:
in the configure wireless networks page, we have to select only computer-to-computer, but the thing is that selection wont stay like that, when i exit out and use wmwifi and disconnect and then lets say tomorrow i want to use it again, and i open the config wireless networks page again just to check its set at only access points...does this happen to anybody or what?

mine also defaults to only access points even though i put all available. i don't know why either. i'll check it out on all my phones and see if it's true for all

[TweetyBear]

on my other phone with a stock rom it defaults at all available. i don't understand. on my main phone i use kaos rom (best rom ever lol)

[broSki]

Originally Posted by TweetyBear

on my other phone with a stock rom it defaults at all available. i don't understand. on my main phone i use kaos rom (best rom ever lol)

lol hmmm I wonder whats going on. Ima see and search to see if there is a registry edit.

[BigBadWolf77]

Originally Posted by BiG JeW

Dont think it is possilbe as i have tried securing with both WEP and other methods. I had no luck ... it tell me when accessing the network from the pc to type the pw or secutity code in and no matter how simple a make the code, the computer doesnt accept it. If anyone knows if a way to secure please let us know.! Thanks!

I believe that for a WEP to work correctly it needs to have 10 digits for 64bit encryption and 26 digits for 128bit encrytion. Your best bet is to have a 10 digit number. I have mine set to 1234554321 that way it is somewhat secure, but also easy enough to give someone else who needs a hotspot. I can also confirm that mine works.

[BiG JeW]

OK thanks for that info Bigbadwolf. you aare probably right. I never inputed a 10 digit character before. thanks for the heads up!

[make-ya-kri]

OMG this app is D/\shit. LOve this, keep up the good work folks. Question will this work with the VX6800 from Verizon?

[BiG JeW]

yes it will make sure you install through the pc on this phone (exe file),,, I dont believe the cab file will install on this model as i have modded one like this out before and had issues with cab, but no issues with the exe file....Press the thanks button.

[Mandingo]

Originally Posted by broSki

to secure it just go to setting/connections/Wi-Fi and once your on it, click and hold on the name of your network and hit edit,after it will bring you to a page that says network name and connects to etc.... hit next, on this page is where you will go to where it says data encryption and select the drop down and select WEP, when you select WEP under that just type in the network key you want and hit next then finish and your set.

Now for my question:
in the configure wireless networks page, we have to select only computer-to-computer, but the thing is that selection wont stay like that, when i exit out and use wmwifi and disconnect and then lets say tomorrow i want to use it again, and i open the config wireless networks page again just to check its set at only access points...does this happen to anybody or what?

thanks everything works great, also set up the 10 bit encryption like BiGBADWOLF said i just used my phone number like everyone uses for there wireless passcode. works great.

[broSki]

Posted via Mobile Device
yup np bro, glad it worked for you,i also have my phone number aswell to lol

[D/\SH]

Originally Posted by broSki

Posted via Mobile Device
yup np bro, glad it worked for you,i also have my phone number aswell to lol

lol me too but mine is my number backwords!!!! and bigman that means i know your password!!!!!!

[broSki]

Originally Posted by D/\SH

lol me too but mine is my number backwords!!!! and bigman that means i know your password!!!!!!

lol word

[BiG JeW]

Awsome .. I am going to secure mine now... YipPiEE!:groupwave:

[Lopan]

Can anyone verify if WMWifiRouter REQUIRES PAM (Phone as a modem), or does the mo cheap $15 Sprint PCS Vision (Data for phone only) works with this. I sure would like to take my phone bill down a notch.

All I've hear so far is "It should" instead of "it works on my $15 PCS Vision".

I have been using my Sprint Mogul with WMWifiRouter for a few months now and I can tell you that phone gets so hot that the battery overheating protection causes it to stop charging and then drains the battery shortly afterward as a result. This happens on all four of my batteries even the HTC provided one. If I keep a fan on it or in a cool place... no problem.

[D/\SH]

Originally Posted by mcgowanbl

Can anyone verify if WMWifiRouter REQUIRES PAM (Phone as a modem), or does the mo cheap $15 Sprint PCS Vision (Data for phone only) works with this. I sure would like to take my phone bill down a notch.

All I've hear so far is "It should" instead of "it works on my $15 PCS Vision".

I have been using my Sprint Mogul with WMWifiRouter for a few months now and I can tell you that phone gets so hot that the battery overheating protection causes it to stop charging and then drains the battery shortly afterward as a result. This happens on all four of my batteries even the HTC provided one. If I keep a fan on it or in a cool place... no problem.

never had the overheating problem and if you have been using it for months now should you know the 15 dollar plan works? i use that all the time without problems and havent been billed for it yet!!! love it and full always comes off a lil warm but not bad at all and fully charged.

[lalo41]

can u connect your phone to the xbox 360 and used xbox live ?

[D/\SH]

Originally Posted by lalo41

can u connect your phone to the xbox 360 and used xbox live ?

maby it does make a new router but the lag would be ridiculous and wouldnt be enjoyable even.

[Balkar]

Hey, i read the whole thing and i am still wondering if you can install this on the vogue touch... I heard somewhere in some other thread of a Wifi microSD card that could work... I was wondering if something like an external bluetooth wifi antena(kinda like gps but for wifi) existed... I did a few search on google but my googling skills kinda suck 9 out of 10 times...


Thanks

[D/\SH]

Originally Posted by Balkar

Hey, i read the whole thing and i am still wondering if you can install this on the vogue touch... I heard somewhere in some other thread of a Wifi microSD card that could work... I was wondering if something like an external bluetooth wifi antena(kinda like gps but for wifi) existed... I did a few search on google but my googling skills kinda suck 9 out of 10 times...


Thanks

no the only way is wifi card but for the touch users you can use pdanet.

[Mandingo]

I took this progam to the test this weekend. Hooking up my PS3, Computer, and Xbox 360. Haven't found it to over heat. Just got warm. Battery lasted for about 3 or so, with the Wifi is constantly running. Xbox 360 works perfect. I Loged on, Downloaded content, and online play. Same with the PS3. Computer and streaming video works also. Very happy with the program, I'm even considering canceling my Cable internet subscription. As far as extra charges for sprint. i have unlimited data and everything. no xtra charge for turning it in to a modem.

[spidermonkey21]

Works Great. Key works without problems for me. No more need for that cable running from the computer and running into the problem of people not having ActiveSync installed for PDAnet. Thanks D/\SH. In the configuration do you need to select Phone as Modem, or Sprint PCS. Or, do you just simply leave it blank and let it connect however?

[broSki]

Originally Posted by spidermonkey21

Works Great. Key works without problems for me. No more need for that cable running from the computer and running into the problem of people not having ActiveSync installed for PDAnet. Thanks D/\SH. In the configuration do you need to select Phone as Modem, or Sprint PCS. Or, do you just simply leave it blank and let it connect however?

just leave that alone.

[spidermonkey21]

The serial that was originally provided by D/\SH also works for the latest version 1.03

Just tested and working today. I love how it also provides that you can use WEP security.

[broSki]

Originally Posted by spidermonkey21

The serial that was originally provided by D/\SH also works for the latest version 1.03

Just tested and working today. I love how it also provides that you can use WEP security.

yup you can also use wep in this version also, I posted hot to do that a few pages before this one.

[Mandingo]

I'm a strong believer in ...if its not broke don't fix it. what the Difference from V1.01 to V1.03

[broSki]

Originally Posted by Mandingo

I'm a strong believer in ...if its not broke don't fix it. what the Difference from V1.01 to V1.03

word, I just search other forums for tht new version and i dont see it, so it means he probably got it from the site which means it isnt hacked.

[Balkar]

Originally Posted by D/\SH

no the only way is wifi card but for the touch users you can use pdanet.

Thanks for getting back to me quickly...

But as far as the wifi card is concerned, do you think the card does a similar job when compared to the mogul's built in wifi? Because i do use pdanet but i read in the thread that people seem to exprience a faster speed with wmwifirouter.... I wouldnt mind the swapping card between my microsd storage card and the wifi one...

Thanks