S2U2 v1point60 (freeware)

[ICEM/\N]

S2U2 v1.60 (freeware)
Requirements: WM5 Phone or WM6/6.1 Professional devices, free RAM: at least 1M for QVGA; 4M for VGA
Overview: S2U2 (Slide2Unlock2) is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don't use your device. It has a CallerID function (but some devices may not work, so please try it first); S2P control plugin; and volume control.



Changes of v1.60
================
- added option to lock most of the system notifications (alarm, reminder, sms/mms & email notice) when the device is locked.
To dismiss the notification on S2U2 (not on the system), either press the Power button or wait for the backlight turns off.
There are also options to auto-dismiss the notifications on the system & to show a preview of the SMS/email when locked.
When a notification is shown on S2U2, unlock the device ("slide to view") will open the corresponding application.
- added option to delay the email preview.
Set a longer delay if your device alerts the new email notification much later than the email preview.
- added a command switch -password for iLock2 to trigger the password lock immediately if the password is set.
Run iLock2.exe -password will turn on the password lock immediately no matter how long the "require password" is set.
Append the iLock2 startup link with -password will trigger the password lock immediately after soft-reset.
However, even with this option added, it does not mean S2U2 is a highly secure password lock.
- added the back button in the password entry screen; it shares the same position of the clear button.
- added a small-style clock - "clockS", included in the clock pack file.
- added option to set up a 2nd clock (both format & clock path).
To switch between the 1st & 2nd clock, tap the clock area.
e.g. switch between digital (clock) & analog (clockA); or between normal & small (clockS).
- added option to set the Vibration LED.
If S2U2 does not vibrate even "Haptic Feedback" is turned on, try to change the value of the Vibration LED;
then turn on or off the "Haptic Feedback" to test it. e.g. the Vibration LED of Omnia is 11.
- added option to show Owner's Information (name & phone) at the bottom.
- added option to hide All-Day appointment.
- added option to do not lock the TouchFLO 3D.
Enable it if the TouchFLO 3D restarts/quits unexpectedly when S2U2 is running, but the Home key will not be locked as before.
- change the Wallpaper settings in the registry will trigger S2U2 to change it's wallpaper immediately.
- when save the settings by S2U2 Settings, a setting backup file "S2U2 Settings.reg" will be saved.
- removed option "Power Save" as the power leak problem is found & fixed.
Please read the FAQ if your device still has power leak when running this version.
- removed option "Don't double check Backlight" as it does not work on some devices.
- removed the command switch -refresh of iLock2 as it does not work in some cases. (actually, it'd been removed since v1.5x)
- fixed the occasional problem that the system hangs on the CallerID screen after rejected an incoming call.
- fixed the occasional problem that the unread count of Flexmail cannot be shown.
- some minor bugs fixed.

QVGA

http://rapidshare.com/files/214192194/S2U2-1.60-QVGA.zip


MIRROR:
http://rapidshare.com/files/214298947/S2U2-1.60-QVGA.zip

VGA

http://rapidshare.com/files/214192195/S2U2-1.60-VGA.zip


MIRROR:
http://rapidshare.com/files/214298946/S2U2-1.60-VGA.zip

[CYBER WEESJE]

hi iceman dubbel posted moving this to the bin


GRTZ WEESJE
MODERATOR@Wckediden