[UPDATES] PocketShield v2718 htc NEW 23/06

PocketShield v2.7.1.7[/b]
Requirements: WM6.1
Overview: PocketShield is an intelligent locking/unlocking application. Prevents accidental touch on the phone screen specially when it is turned on not precisely by you.


Have you ever accidentally ignored an incoming call? Have you ever accidentally answered a call and left the caller 'talking to your pocket'? Have you ever accidentally dismissed reminders or alarms? …or 'never heard of them'? Has your phone ever freezed because of too much 'touch input'? Have you ever had programs mysteriously starting 'by themselves'? Has your ear ever started a program? Has your phone ever drained out batteries too fast because of being ON inside your pocket?

If you answered 'YES!' for any of the questions above, then this is great news for you!
More Info:

Code

http://www.pocketshield.net/

If you answered 'YES!' for any of the questions above, then this is great news for you!

What is?
PocketShield is an intelligent locking/unlocking application. Prevents accidental touch on the phone screen specially when it is turned on not precisely by you. For example: when receiving calls, email notifications, SMS, alarms, etc. As you may have experienced, PocketPCs “wake up” whenever any of these events occur, they will also wake up when batteries are low, and randomly when phone signal changes antenna depending on your location. But the problem is: what if the phone is inside your pocket in that moment? or inside its case or pouch? Touch screens will take any touch over it as a user input, and arbitrary “touching” could cause many undesired results! (refer to questions on top).

“But Windows Mobile has a built in screen locker!”
Yes, Windows Mobile locks the screen, but unlocks the Answer and Ignore buttons as soon as a call rings, so doesn't help. The same happens when any notification pops up, the Snooze and Dismiss buttons are enabled even when screen is locked, leaving them vulnerable to any accidental touch.

Oh! Now I see… So, how it works?
PocketShield completely locks the screen when phone wakes up and is inside your pocket or case, and unlocks it automatically as soon as you take it off. Magic? Now a days, most phones come with an integrated light sensor, PocketShield uses this sensor to determine if the phone is inside something(without light reaching it). So if it’s receiving light it is probably because you have it in your hand, or you have it over your desk, or someplace where there would be no reason to have it locked. [more...]

Interesting… But what if it’s dark or it is night?
Good question! If that’s the case, you still have 5+ extra unlock options:

* Hand gesture, moving it in a particular way.
* Slide your finger over the screen from the top towards down.
* Stylus out.
* Press D-pad round button.
* Application permissions

You can combine any of the 5 unlocking mechanisms, as they are designed to work together. Choose the configuration that suits you better!
So, during day, unlocking is going to be 100% automatic, no need to worry. Only at night (or when no light) you would need an alternative way to unlock. [more...]

Features

* Auto lock, no need to worry about locking, just turn off(sleep) your phone and feel confident.
* Screen auto-unlock when out of pocket, or when light available.
* Screen unlock by sliding finger from top towards down (vertical sliding for improved hand ergonomics)
* Unlock by gestures (flipping or shaking phone).
* Unlock and lock with stylus.
* Customizable hardware keys blocking.
* Answer calls by gestures, or slide.
* Vibration feedback when you unlock or when auto-unlocks.
* Digital clock with date option. 12H or 24H option.
* Displays caller name, number and contact picture for incoming and outgoing calls.
* Displays missed calls, reminders, alarms, SMS, email, voice-mail.
* Accurate battery bar indicator.
* Manual lock.
* Option to directly power off device when manually locked.
* Auto power off after 20 seconds if never unlocked (battery protection).
* Screen protection during calls (or after calls).
* Customizable layout and/or background image.
* Skins/themes supported.
* Application permissions for unlock, grant clearance to specific apps.
* System settings helper.
* [more...]

Languages
Settings are available in the following languages: EN, FR, RU, PT, DE, IT, HU, NO, SK, SV, ES, CS, RO, TC, CN, NL, CA, PL, JP, DK.

Is this a battery killer app?
Not at all! Tests performed didn't throw any additional(nor noticeable) battery drain. When device is in unlocked state, PocketShield enters sleep mode so no extra battery is consumed (as well as when device is in standby/Off). Instead, it will help you avoid battery drain when turned on unintentionally, thanks to the auto power off mechanism it incorporates.

RAM footprint?
The activated version with no theme uses a range of 1.6Mb -1.8Mb of RAM. Not actually all because of itself, all .Net Framework based applications use a bit of extra memory to load some system libraries for quicker access and performance. To have a reference, the standard HTC Calculator which is a very simple application uses 1.2Mb. PocketShield takes only 0.4Mb extra, and this because it has to deal with light sensor, g-sensor, touch sliding, call handling, notifications, etc. HTC Diamond has 196Mb RAM and TouchPro has 288Mb, that is 0.85% and 0.6% of used memory, in both cases less than 1%.

What’s new?
- Notifications customization.
- Notification booster while in standby (will remind you your desired alerts and notifications so you never forget them).
- Slide-to-snooze for Notifications booster.
- Option to lock(or power off) with stylus in.
- Auto display hidden WM notifications after unlocking (no more need to click over the tiny taskbar bell).
- WM6.5 fully supported.
- WM Alarm supported in Applications Permissions (PS unlock upon WM alarm)
- Lite mode: can disable completely phone and/or notification options to just leave lock/unlock features.

What’s better?
- 15 secs power off (or only screen off with app permissions)
- Design tab / Themes
- Second calls handling
- Overall performance improvements
- Application Permissions optimized for music players
- Bigger caller ID picture

What’s fixed?
- Taskbar pop over when qwerty out
- Caller ID issues
- Light sensor false peaks causing random unlocking
- Installation location can now be Storage Card.

More Info

Code

http://pocketshield.netserver01.com

Code

http://www.uploadjockey.com/download/83939/pocketshield.2.7.0.0-tsrh.zip

Mirror:

Code

http://www.ziddu.com/download/4843388/pocketshield.2.7.0.0-tsrh.zip.html

some skins thanks jr









GRTZ CYBER WEESJE
MODERATOR@Wckediden HIT THANKS ON THE WAY OUT

[D/\SH]

by any chance can i get an attachment so when the new device comes im loaded with the newest version of this app :)

thanks guys

[CYBER WEESJE]

“ Originally Posted by D/\SH ”

by any chance can i get an attachment so when the new device comes im loaded with the newest version of this app :)

thanks guys

hi bro done and done addet to the first posted




GRTZ CYBER WEESJE
MODERATOR@Wckediden

[D/\SH]

“ Originally Posted by CYBER WEESJE ”

hi bro done and done addet to the first posted




GRTZ CYBER WEESJE
MODERATOR@Wckediden

thank you kind sir very much appreciated :)

[drdrewdown]

very slick app! i am going to use it in replace of S2u2 for a little while & see if it grows on me. i luv all the settings & configurable options.

right now i'm looking to see if it can give u a sms notification of the txt message like s2u2 does.

[CYBER WEESJE]

bump bump new releas addet



grtz cyber weesje
moderator@Wckediden

[CYBER WEESJE]

bump bump new releas addet



GRTZ CYBER WEESJE
MODERATOR@Wckediden

[polobreaka]

doesnt look like it supports 320x320 sq screen huh? i tried to use the qvga and it only display on 1 side of the screen.

[jr5416]

“ Originally Posted by polobreaka ”

doesnt look like it supports 320x320 sq screen huh? i tried to use the qvga and it only display on 1 side of the screen.

Yea bro that wont work for u ill do some search for u

[CYBER WEESJE]

“ Originally Posted by polobreaka ”

doesnt look like it supports 320x320 sq screen huh? I tried to use the qvga and it only display on 1 side of the screen.

hi now this dont support 320x320 qvga vga wvga thats all


grtz cyber weesje
moderator@Wckediden

[D/\SH]

“ Originally Posted by CYBER WEESJE ”

hi now this dont support 320x320 qvga vga wvga thats all


grtz cyber weesje
moderator@Wckediden

yup thus why it says htc devices in the title.... the only ones with square screen resolutions are palms.

[only1penny]

thanks for the app. this is my fav unlocker by far. it seemed that every different one i used had some little issues that made it not very attractive to me. but this one is great.

[VenumX]

“ Originally Posted by D/\SH ”

yup thus why it says htc devices in the title.... the only ones with square screen resolutions are palms.

HTC Snap :P.............

[jr5416]

Here are some nice skins i found :

[jr5416]

Here some more :

[hctr68]

Very nice Themes, and really love this program runs really smooth thanks!

[jr5416]

“ Originally Posted by hctr68 ”

Very nice Themes, and really love this program runs really smooth thanks!

Thanks for feedback bro make sure u hit the mark as installed and thank the author.

[CYBER WEESJE]

“ Originally Posted by jr5416 ”

Here some more :

thanks bro nice find



GRTZ CYBER WEESJE
MODERATOR@Wckediden

[jr5416]

Sorry weesjie always making u work huh lol

[drdrewdown]

needed to let you know. if there is an update to the HTC version of this phone, it wasn't included in the latest zip file. here are the file names of the files included in the updated zip release on 6/23

PocketShield.HTC.2.7.1.7.CAB
PocketShieldHdcp.2.7.1.8.CAB
PocketShieldOmnia.2.7.1.8.CAB

was this an error or only the other versions were updated?

btw this is my fav locking/unlocking app by far!!!

[CYBER WEESJE]

“ Originally Posted by drdrewdown ”

needed to let you know. If there is an update to the htc version of this phone, it wasn't included in the latest zip file. Here are the file names of the files included in the updated zip release on 6/23

pocketshield.htc.2.7.1.7.cab
pocketshieldhdcp.2.7.1.8.cab
pocketshieldomnia.2.7.1.8.cab

was this an error or only the other versions were updated?

Btw this is my fav locking/unlocking app by far!!!

yeah i notice that also yesterday i will see what i can do EDIT THE LAST FILE HTC CRACKED THATS THE 2.7.1.8



grtz cyber weesje
moderator@Wckediden

[only1penny]

i don't know what the problem is. i was using the older version and thought it was great. i installed the newer version and the phone keeps getting unlocked somehow. when i'm at work i wear big heavy bib overalls and a big thigh length coat over my clothes. when i check my phone i've often made several 8-15 second phone calls. i can't figure out how it's getting unlocked. any ideas? plz and thnx

[CYBER WEESJE]

“ Originally Posted by only1penny ”

i don't know what the problem is. i was using the older version and thought it was great. i installed the newer version and the phone keeps getting unlocked somehow. when i'm at work i wear big heavy bib overalls and a big thigh length coat over my clothes. when i check my phone i've often made several 8-15 second phone calls. i can't figure out how it's getting unlocked. any ideas? plz and thnx

hi not realy now since dont use this app but try reinstall and clean up your device if its doing it again install the old one and whait for new releas you thit download the last rar file right


GRTZ CYBER WEESJE
MODERATOR@Wckediden

[drdrewdown]

“ Originally Posted by only1penny ”

i don't know what the problem is. i was using the older version and thought it was great. i installed the newer version and the phone keeps getting unlocked somehow. when i'm at work i wear big heavy bib overalls and a big thigh length coat over my clothes. when i check my phone i've often made several 8-15 second phone calls. i can't figure out how it's getting unlocked. any ideas? plz and thnx

be sure to double check your settings.. this is a great app, its never posed or acted like a problem for me. its always in my pocket while riding sportbikes & its never been an issue.
& thx weesje for updating the thread

[only1penny]

“ Originally Posted by drdrewdown ”

be sure to double check your settings.. this is a great app, its never posed or acted like a problem for me. its always in my pocket while riding sportbikes & its never been an issue.
& thx weesje for updating the thread

what r your settings set to?

[drdrewdown]

i would make sure you have the hardware keys disabled as that is most likely your problem.

[only1penny]

i think the hard keys were my problem. i uninstalled and reinstalled didn't mess with the settings to much. now it's a great app once more!

[only1penny]

no it's not the hardware keys they're disabled. it happened again tonight. the phone would've had to turn on, navigate to the people tab, then call. the number it called is at the top of my favorites in the people tab, i'm running tf3d2. maybe i need a new case. i use the case that came with the tpro, velcro, horrible. on the waist it does get a lot of bumping at work.....but it still shouldn't be calling out.

[drdrewdown]

ok dude can you imagine how, in the case, it would do the vertical sliding action of unlocking it? on the unlocking tab of the configuration what all options do you have selected? dont be shy with the information, we need as much as you have to help you diagnose the problem as i'm pretty sure none of us are mind readers. =]

[ebuzz]

OK, so I made the mistake of hitting the "Check for updates" button and downloaded ver.2.7.2.2, now its asking for "activation." Is there a keygen somewhere or should i just go back to the one in the first post?

[D/\SH]

“ Originally Posted by ebuzz ”

OK, so I made the mistake of hitting the "Check for updates" button and downloaded ver.2.7.2.2, now its asking for "activation." Is there a keygen somewhere or should i just go back to the one in the first post?

just reninstall and use the newest version posted here following the steps to get it activated again for you....... on crakced apps 99.9% of the time you cant run the update without ir not staying registered since when cracking an app you overwrite certain files like dlls making it not recognize registration or recognize it as being registered already.

[ebuzz]

“ Originally Posted by D/\SH ”

just reninstall and use the newest version posted here following the steps to get it activated again for you......

Thanks, I did that. I was wondering about the "slide to answer" option in this app. It said it noticed that I was not using a WM based dialer and suggested "switching from HTC dialer to WM dialer." It even offered to download & install a .cab file to do that. Has anyone tried that and do you know if it would be easy to switch back to whatever dialer I am using now (not even sure which dialer I am using with the Star ROM)?

[drdrewdown]

basically the stock dialer is just a "push" to answer system where the new dialer you may have is the slider to answer system. it wants to switch you to the push version b/c in my estimation it has to emulate that sliding mechanism which takes a tad longer hence the 2second delay they mention.

now if you use their slide 2 answer system from pocketshield its a vertical layout where the left hand side of the phone will answer & the right side will reject the call. hope that helps good luck

[ebuzz]

“ Originally Posted by D/\SH ”

just reninstall and use the newest version posted here following the steps to get it activated again for you....... on crakced apps 99.9% of the time you cant run the update without ir not staying registered since when cracking an app you overwrite certain files like dlls making it not recognize registration or recognize it as being registered already.

Funny! I did just get a msg that "this is an evaluation version....." with a 6or 7 second count down. Eventhought I reinstalled the cracked app. Anyone else get that?

[CYBER WEESJE]

“ Originally Posted by ebuzz ”

Funny! I did just get a msg that "this is an evaluation version....." with a 6or 7 second count down. Eventhought I reinstalled the cracked app. Anyone else get that?

hi try removing whit sktools clean up device and reinstall


GRTZ CYBER WEESJE
MODERATOR@Wckediden

[ebuzz]

“ Originally Posted by CYBER WEESJE ”

hi try removing whit sktools clean up device and reinstall


GRTZ CYBER WEESJE
MODERATOR@Wckediden

Thanks, I'll give that a try and let you know.

[ebuzz]

“ Originally Posted by CYBER WEESJE ”

hi try removing whit sktools clean up device and reinstall


GRTZ CYBER WEESJE
MODERATOR@Wckediden

OK, so I removed and reinstalled on Saturday, before the end of the day, I got the same message that it was an evaluation version. It did not happen again until this morning. There is an email address and PIN on the activation screen, but the Activate button is greyed out.
Do these things only happen to me? :(

[CYBER WEESJE]

“ Originally Posted by ebuzz ”

OK, so I removed and reinstalled on Saturday, before the end of the day, I got the same message that it was an evaluation version. It did not happen again until this morning. There is an email address and PIN on the activation screen, but the Activate button is greyed out.
Do these things only happen to me? :(

hi that strange and you removed and clean whit sktools



GRTZ CYBER WEESJE
MODERATOR@Wckediden

[ebuzz]

“ Originally Posted by CYBER WEESJE ”

hi that strange and you removed and clean whit sktools



GRTZ CYBER WEESJE
MODERATOR@Wckediden

Yes, I did. But it's kind of strange, at least for me, if I try to remove an app with SK tools w/o first removing it with the standard "remove programs" it never really gets removed. It took forever to get it off that way b/c even though I used SK Tools and removed the app, when I tried to reinstall I got the msg that the old version would have to be removed first, when I said OK, the msg said, the old version can't be removed, installation unsuccessful. I had to go into the reg and delete anything associated with the app and then go into each folder associated with the app and delete that as well.
Once I got it all cleaned out, I was able to reinstall, but still get the msg about activation. Can't figure it out!

[CYBER WEESJE]

“ Originally Posted by ebuzz ”

Yes, I did. But it's kind of strange, at least for me, if I try to remove an app with SK tools w/o first removing it with the standard "remove programs" it never really gets removed. It took forever to get it off that way b/c even though I used SK Tools and removed the app, when I tried to reinstall I got the msg that the old version would have to be removed first, when I said OK, the msg said, the old version can't be removed, installation unsuccessful. I had to go into the reg and delete anything associated with the app and then go into each folder associated with the app and delete that as well.
Once I got it all cleaned out, I was able to reinstall, but still get the msg about activation. Can't figure it out!

yeah its strange sktools is the best remover for apps safe and the deepclean function realy cleans up good the only thing you can try is to install the early releas of the app i see if that works dont now if theres a keygen for it but all apps are cracked and alot of members use this whitout isseu


GRTZ CYBER WEESJE
MODERATOR@Wckediden

[ebuzz]

“ Originally Posted by CYBER WEESJE ”

yeah its strange sktools is the best remover for apps safe and the deepclean function realy cleans up good the only thing you can try is to install the early releas of the app i see if that works dont now if theres a keygen for it but all apps are cracked and alot of members use this whitout isseu


GRTZ CYBER WEESJE
MODERATOR@Wckediden

The deep clean function does seem to take a very long time to run (at least for me). Is that normal? As for the early release of the app, would that be the 2....7 version? and that would mean removing the one I have on now.

[CYBER WEESJE]

“ Originally Posted by ebuzz ”

The deep clean function does seem to take a very long time to run (at least for me). Is that normal? As for the early release of the app, would that be the 2....7 version? and that would mean removing the one I have on now.

so takes a bit longer yeah but not very long strange 2.7.1 or 2.7.00 and removed the ohter clean up soft reset and install


GRTZ CYBER WEESJE
MODERATOR@Wckediden

[ebuzz]

“ Originally Posted by ebuzz ”

, would that be the 2....7 version? and that would mean removing the one I have on now.

I did notice the when I unzipped the 2.7.1.8 zip file there were 2 cabs, one for Omina and one for hdcp, can I use the hdcp for my touch pro?

[CYBER WEESJE]

“ Originally Posted by ebuzz ”

I did notice the when I unzipped the 2.7.1.8 zip file there were 2 cabs, one for Omina and one for hdcp, can I use the hdcp for my touch pro?

what you need the lats rarfile htccracked one


GRTZ CYBER WEESJE
MODERATOR@Wckediden

[ebuzz]

“ Originally Posted by CYBER WEESJE ”

what you need the lats rarfile htccracked one


GRTZ CYBER WEESJE
MODERATOR@Wckediden

This one ? PocketShieldHTC.crk.CAB

[CYBER WEESJE]

“ Originally Posted by ebuzz ”

this one ? pocketshieldhtc.crk.cab

yeah so you installed the wrong one its says htc cracked this for your tp


grtz cyber weesje
moderator@Wckediden