WckedIDen Forum Renovations

D/\SH · #**151** 08-13-2008, 05:13 PM

“ Originally Posted by vcg5090 ”

i have been trying to do this but have been getting a communications error during the rom update utility ver. 3.16.4.2 and then it goes into recovery mode, but i never need to recover because the phone boots fine. it does bring up the percentage bar on both the pc and the phone, what could be the problem?

well what phone do you have???? have you unlocked the phone??? what rom are you trying to flash???? come on bro we need the details to help you...... and also if you follow the steps you will be fine..... these are step by step and dont understand why this is such a hard process......

vcg5090 · #**152** 08-14-2008, 09:02 AM

sorry, i have the mogul and i was trying to install take 3 enhanced... i started with Titan_Radio_ROM_3[1].42.30 the .exe and had the same error. It seems like its communicating and it brings up the % bars on both the pc and phone but stays at 0% and then after about a min or two it comes back with a communications error. i also tried the titan unlocker and it does the same thing (hard-SPL-MFG). i followed the instructions even tried the sd card way and it sits there with a loading... on the screen i used a 512mb sd card formatted fat32 with only the Titan_Radio_ROM_3[1].42.30 nbh file on it it was named TITAIMG.nbh. i admitt i dont have much experience with these phones, but i do have over 20 years in the computer and networking field.

D/\SH · #**153** 08-14-2008, 03:56 PM

“ Originally Posted by vcg5090 ”

sorry, i have the mogul and i was trying to install take 3 enhanced... i started with Titan_Radio_ROM_3[1].42.30 the .exe and had the same error. It seems like its communicating and it brings up the % bars on both the pc and phone but stays at 0% and then after about a min or two it comes back with a communications error. i also tried the titan unlocker and it does the same thing (hard-SPL-MFG). i followed the instructions even tried the sd card way and it sits there with a loading... on the screen i used a 512mb sd card formatted fat32 with only the Titan_Radio_ROM_3[1].42.30 nbh file on it it was named TITAIMG.nbh. i admitt i dont have much experience with these phones, but i do have over 20 years in the computer and networking field.

try to do a hard reset than try it and see what it does.

thermus · #**154** 08-21-2008, 02:09 AM

ok so I download big jews rom. its an nbh file. I download the ruu llisted here and its the mogul on it. is this ok???? Second do I have to unlock if I ran the upgrade from htc? I WAS unlocked before with cokeman.

D/\SH · #**155** 08-21-2008, 04:01 AM

“ Originally Posted by thermus ”

ok so I download big jews rom. its an nbh file. I download the ruu llisted here and its the mogul on it. is this ok???? Second do I have to unlock if I ran the upgrade from htc? I WAS unlocked before with cokeman.

if you unlocked your still fine........ and you said bigjews rom so you have a touch correct? and what do you mean the the nbh has a mogul on it..... big jew nbh is for a touch not a mogul?

thermus · #**156** 08-21-2008, 10:29 AM

“ Originally Posted by D/\SH ”

if you unlocked your still fine........ and you said bigjews rom so you have a touch correct? and what do you mean the the nbh has a mogul on it..... big jew nbh is for a touch not a mogul?

I know that much. When i went through the steps it said do download the RUU file for the touch, unzip, place .nbhj file in the RUU folder and then run the installer. When I did that a picture of the mogul came up on the installer.

As far as the unlocked thing I was unlocked when I flashed the HTC Rom update. Does that mean I am still unlocked?

D/\SH · #**157** 08-21-2008, 01:36 PM

“ Originally Posted by thermus ”

I know that much. When i went through the steps it said do download the RUU file for the touch, unzip, place .nbhj file in the RUU folder and then run the installer. When I did that a picture of the mogul came up on the installer.

As far as the unlocked thing I was unlocked when I flashed the HTC Rom update. Does that mean I am still unlocked?

no you dont unlock for flashing stock roms....... and you shouldnt.... if you do a search on google for blank ruu you will find it also.... it shouldnt show mogul but since it does it prollly wont work because of the enter bootloader aspect and all.

thermus · #**158** 08-21-2008, 05:13 PM

“ Originally Posted by D/\SH ”

no you dont unlock for flashing stock roms....... and you shouldnt.... if you do a search on google for blank ruu you will find it also.... it shouldnt show mogul but since it does it prollly wont work because of the enter bootloader aspect and all.

I was unlocked already cause I did the gps update before the official update cam out. I will see if I can find a blank RUU from google. Do I need to reunlock since I flashed the official release from htc's website???

D/\SH · #**159** 08-21-2008, 06:10 PM

“ Originally Posted by thermus ”

I was unlocked already cause I did the gps update before the official update cam out. I will see if I can find a blank RUU from google. Do I need to reunlock since I flashed the official release from htc's website???

naw on a touch you will always be unlocked.

thermus · #**160** 08-21-2008, 06:20 PM

“ Originally Posted by D/\SH ”

naw on a touch you will always be unlocked.

OK, cause it doesn't say cokeman anymore on the startup. Also, if you could help find the RUU it would be awesome. Maybe post a thread with this program in it so other dummies like me can find it better. :P

D/\SH · #**161** 08-21-2008, 07:07 PM

“ Originally Posted by thermus ”

OK, cause it doesn't say cokeman anymore on the startup. Also, if you could help find the RUU it would be awesome. Maybe post a thread with this program in it so other dummies like me can find it better. :P

bro its not hard to find at all come on try a search on google takes 10 seconds to do so...... and if it doesnt say it than you need to unlock....

ftp://ppcgeeks.com/Vogue/Users/ImCoKeMaN

thermus · #**162** 08-21-2008, 07:23 PM

“ Originally Posted by D/\SH ”

bro its not hard to find at all come on try a search on google takes 10 seconds to do so...... and if it doesnt say it than you need to unlock....

ftp://ppcgeeks.com/Vogue/Users/ImCoKeMaN

Thanks for the help............

D/\SH · #**163** 08-21-2008, 07:39 PM

“ Originally Posted by thermus ”

Thanks for the help............

no problem.

badluckben · #**164** 08-31-2008, 07:11 PM

“ Originally Posted by thermus ”

Thanks for the help............

can anyone help me flash a boost mobile i425??, ive found alot of places that say how and ive done the directions to the "t" but at the last second it says error "flash device not supported" ive downloaded the i425.s19 file from several locations but can't seem to get it to work for me. this is an american phone and service.. trying to make it work with nextel.. can anyone help me?

D/\SH · #**165** 08-31-2008, 09:07 PM

“ Originally Posted by badluckben ”

can anyone help me flash a boost mobile i425??, ive found alot of places that say how and ive done the directions to the "t" but at the last second it says error "flash device not supported" ive downloaded the i425.s19 file from several locations but can't seem to get it to work for me. this is an american phone and service.. trying to make it work with nextel.. can anyone help me?

this is more for the ppc. if you ask in the help desk area under the correct area (iden area) than my man wcked will see the post and be more than willing to help you out.

demonoid · #**166** 09-02-2008, 01:57 PM

This is some nice work... Looks a bit scary but im pretty sure it would be an easy task to accomplish .. Once i do it the first time .... thank ya for all the info..

D/\SH · #**167** 09-02-2008, 03:24 PM

“ Originally Posted by demonoid ”

This is some nice work... Looks a bit scary but im pretty sure it would be an easy task to accomplish .. Once i do it the first time .... thank ya for all the info..

no problem and after the first time you will cruise through flashing and not think anything of it.

thekool · #**168** 09-06-2008, 01:48 PM

could you add the nextel i870 please

wcked · #**169** 09-06-2008, 03:13 PM

“ Originally Posted by thekool ”

could you add the nextel i870 please

first you posting and asking for something that has nothing to do with the topic..any nextel related stuff is archived which it can be found the bottom of the page.I suggest you read the forum rule about posting in the wrong area..

D/\SH · #**170** 09-06-2008, 03:22 PM

“ Originally Posted by thekool ”

could you add the nextel i870 please

the i870 doesnt have roms so how am i supposed to do it??? the i870 isnt a ppc or a smartphone which would have roms.

rashumble7 · #**171** 09-09-2008, 02:43 AM

Any chance of a pm or post for my HTC Touch p3050 from Telus to Metropcs full flash. Thanks, keep up the good work.

TweetyBear · #**172** 09-09-2008, 07:07 AM

“ Originally Posted by rashumble7 ”

Any chance of a pm or post for my HTC Touch p3050 from Telus to Metropcs full flash. Thanks, keep up the good work.

for you to do that, you'd need to clone esn and i'm not too clear on that. hope someone else can help u further

D/\SH · #**173** 09-09-2008, 09:21 AM

“ Originally Posted by rashumble7 ”

Any chance of a pm or post for my HTC Touch p3050 from Telus to Metropcs full flash. Thanks, keep up the good work.

thats cdma correct???? it would be the same process than as listed for verizon users...... just follow theose steps and than at the point of flash after unlock run the rom that you need :>

rashumble7 · #**174** 09-09-2008, 12:03 PM

Yes it is cdma, thanks for the swift reply. So i would use the verizon method of flashing, after flashing/unlocking i would call my metropcs service provider to connect the phone to my account and then flash new rom to the device. Is that correct? If not please correct me, im quite new to flashing but will pick up easy with detailed instructions. Thanks again for your time and patience

D/\SH · #**175** 09-09-2008, 12:31 PM

“ Originally Posted by rashumble7 ”

Yes it is cdma, thanks for the swift reply. So i would use the verizon method of flashing, after flashing/unlocking i would call my metropcs service provider to connect the phone to my account and then flash new rom to the device. Is that correct? If not please correct me, im quite new to flashing but will pick up easy with detailed instructions. Thanks again for your time and patience

yes you will follow the verizon one and than you unlock like it says to do and than flash to the rom of your choice.

xx585xx · #**176** 09-12-2008, 09:18 PM

my phone is stuck on the red green blue screen. in the red part it says TITA100 MFG
SPLA-2.40.olipro
Cpld-9
i ran the exit bootloader but it says that it cannot open usb port please make sure that usb connection in activesync is diabled. i cant turn off the phone and i tried pressing the button with the stylus someone plz help.......xx585xx aim me

D/\SH · #**177** 09-12-2008, 09:20 PM

“ Originally Posted by xx585xx ”

my phone is stuck on the red green blue screen. in the red part it says TITA100 MFG
SPLA-2.40.olipro
Cpld-9
i ran the exit bootloader but it says that it cannot open usb port please make sure that usb connection in activesync is diabled. i cant turn off the phone and i tried pressing the button with the stylus someone plz help.......xx585xx aim me

bro your fione just flash the rom of your choice now and your good to go.... this has been discussed before so you would have found your answer by doing a search...... ( for future reference) as long as the serial on the bottom screen changes to usb you iwll be connected to activesync or mobile device center and ready to flash.

marvlman · #**178** 09-12-2008, 09:57 PM

that sux dude, mine did the same a while back and stayed that way

D/\SH · #**179** 09-12-2008, 10:23 PM

“ Originally Posted by marvlman ”

that sux dude, mine did the same a while back and stayed that way

no its fine if he follows the steps i stated above......... not even close th being bricked and when flashing you will always get that screen

shacklock · #**180** 09-13-2008, 12:35 AM

admin edited: infraction issued posting in wrong thread. asking for support which has no relevant to this title

tmor5078 · #**181** 09-21-2008, 10:26 PM

i have a mogul and trying to flash kaos new rom, this is my first rom. Read and followed your directions to a t. now after I unlock it and the screen is red and blue, and it reads USB. I run the ruu but i can't get it to connect. error 260

I tried find the answer by searching but no luck been at it for 2 hours any help would be greatly appreciated.

D/\SH · #**182** 09-21-2008, 10:38 PM

“ Originally Posted by tmor5078 ”

i have a mogul and trying to flash kaos new rom, this is my first rom. Read and followed your directions to a t. now after I unlock it and the screen is red and blue, and it reads USB. I run the ruu but i can't get it to connect. error 260

I tried find the answer by searching but no luck been at it for 2 hours any help would be greatly appreciated.

i bet you that you didnt follow the steps and unlock your phone...... what does the bootloader screen up top say like numbers??? it should be coke 2.40. and also did you try to flash via storage card???? fastest and easiest way to go. :>

tmor5078 · #**183** 09-21-2008, 10:45 PM

“ Originally Posted by D/\SH ”

i bet you that you didnt follow the steps and unlock your phone...... what does the bootloader screen up top say like numbers??? it should be coke 2.40. and also did you try to flash via storage card???? fastest and easiest way to go. :>

TITA100 MFG
SPL-2.40 Olipro
CPLD-9

haven't tried the card method yet

D/\SH · #**184** 09-21-2008, 11:03 PM

“ Originally Posted by tmor5078 ”

TITA100 MFG
SPL-2.40 Olipro
CPLD-9

haven't tried the card method yet

i would try that... jsut rename to TITAIMG.NBH

tmor5078 · #**185** 09-21-2008, 11:32 PM

“ Originally Posted by D/\SH ”

i would try that... jsut rename to TITAIMG.NBH

did it the went to the bootloader screen thought cam+power+reset. bootloader came up normal then said loading then back to red blue green screen. did hard reset and now wont go past the windows 6.1 screen:40::40::40::40::40::40:

D/\SH · #**186** 09-21-2008, 11:35 PM

“ Originally Posted by tmor5078 ”

did it the went to the bootloader screen thought cam+power+reset. bootloader came up normal then said loading then back to red blue green screen. did hard reset and now wont go past the windows 6.1 screen:40::40::40::40::40::40:

ok did it complete the flash???? if it did all you need to do is get the radio out of the first post of kaos's rom and flash that the same way..... than hard reset the phone and than let it do its thang than take the battery out for a minute.

tmor5078 · #**187** 09-21-2008, 11:40 PM

how do you know if it flashed completely?

is this the radio?????????
-Now based on 3.42.30 or 3.42.50 (SPRINT build) (BELL BUILD) -

--------- New Post Merged on 21/9/2008 at 11:43:22 --------

i think mines 3.42.02 dose that sound right

D/\SH · #**188** 09-22-2008, 02:16 AM

“ Originally Posted by tmor5078 ”

how do you know if it flashed completely?

is this the radio?????????
-Now based on 3.42.30 or 3.42.50 (SPRINT build) (BELL BUILD) -

--------- New Post Merged on 21/9/2008 at 11:43:22 --------

i think mines 3.42.02 dose that sound right

yes on the bell rom and it will say complete up top and the bars will be full at 100%

dragonzkin · #**189** 09-22-2008, 01:18 PM

Whoa! This thread was exactly what I was lookin for. Thanks for showing me what the hell a .nbh extension was. Even google barely knows! :)

--------- New Post Merged on 22/9/2008 at 02:05:02 --------

BWUAHAHAHHAH!

This is great. Thanks for the great walkthrough. Things worked out on my first shot!! (sort of).

First time I booted it up after the successful flash it just started vibrating and wouldn't stop (not the first time my phone has done this, not sure if it is a ROM or hardware issue, has anyone else ran into this?).

After pullin the battery though everything worked out great. Booted up and is syncing now.

Thanks to Dash n Kaos for great work!!!!:yahoo:

tmor5078 · #**190** 09-22-2008, 03:29 PM

“ Originally Posted by D/\SH ”

yes on the bell rom and it will say complete up top and the bars will be full at 100%

mine just flashes loading then go right back to red blue green

I didn't format my card:dash3:

is there a way to format the sd without a card reader?

Porschefb61 · #**191** 09-23-2008, 07:40 AM

Dash.....I just got the nuerom pre3 Rom.....can I install it the way described here or do i have to use their method?

TweetyBear · #**192** 09-23-2008, 08:12 AM

“ Originally Posted by Porschefb61 ”

Dash.....I just got the nuerom pre3 Rom.....can I install it the way described here or do i have to use their method?

should be the same way. i believe nuerom is in a folder with ruu_signed.nbh, ruuupdateutility.exe and other stuff. all you gotta do is make sure you're on a gps enabled rom and then unlock your phone then flash away!

csmartycssmarty · #**193** 09-24-2008, 12:54 PM

ok i think is a good place to ask this... i hope anyway... any difference in flashing roms to the diamond. i know the rom would have to be designed for the diamond but other than that... do we still follow the same steps with the hardspl unlocker and all or is there a different unlocking program... just smack me if this is a stupid question!!!!

GokuSS3 · #**194** 09-24-2008, 01:51 PM

“ Originally Posted by csmartycssmarty ”

ok i think is a good place to ask this... i hope anyway... any difference in flashing roms to the diamond. i know the rom would have to be designed for the diamond but other than that... do we still follow the same steps with the hardspl unlocker and all or is there a different unlocking program... just smack me if this is a stupid question!!!!

Yep same windows mobile system you would just need hard SLP and RUU for the Diamond then you could go Flash happpy :brows:

D/\SH · #**195** 09-24-2008, 10:35 PM

“ Originally Posted by GokuSS3 ”

Yep same windows mobile system you would just need hard SLP and RUU for the Diamond then you could go Flash happpy :brows:

all you need is the unlcoker for the diamond as said above and than the rom....... the custom roms i have seen (juicy is the best and made mine off of his) have the nbh already inserted into the ruu upon download.... so unlock grab your rom and flash away... the steps are all the same as the mogul just a different unlocker. i will try to remember to get a tutorial for the diamond added later tonight :>

thekool · #**196** 09-26-2008, 07:00 AM

Ok sorry for the trouble

LOoLoO · #**197** 09-30-2008, 11:28 PM

I saw there was an extra section for flashing under the touch section.

I am wondering is there any issues i should expect to run into while flashing my htc mogul with laptop running Vista 64bit?

(I know I could run into a million different possible failures....but I am just wondering if there are consistent errors while using vista 64bit I should be prepared for.)

Thanks in advance for the help.

GokuSS3 · #**198** 09-30-2008, 11:50 PM

“ Originally Posted by LOoLoO ”

I saw there was an extra section for flashing under the touch section.

I am wondering is there any issues i should expect to run into while flashing my htc mogul with laptop running Vista 64bit?

(I know I could run into a million different possible failures....but I am just wondering if there are consistent errors while using vista 64bit I should be prepared for.)

Thanks in advance for the help.

I have not run into any problems flashing roms using Vista yet it works great for me :brows: I think you should be fine flashing your mogul on that!!!!!!

LOoLoO · #**199** 10-01-2008, 12:11 AM

Thanks for your quick reply.

A quick question.

Are you using the 32bit os or the 64 bit os of Vista?

Seems I have problems doing things on 64bit version that people on 32bit version do not experience.

GokuSS3 · #**200** 10-01-2008, 12:17 AM

“ Originally Posted by LOoLoO ”

Thanks for your quick reply.

A quick question.

Are you using the 32bit os or the 64 bit os of Vista?

Seems I have problems doing things on 64bit version that people on 32bit version do not experience.

:40: lmao not sure ill have to check on that !!!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yet another company makes flashing custom ROMs more restrictive	phillynews215	Digital Scoop	0	01-03-2025 03:20 PM
New @ flashing roms	quique79	AT&T Tilt Questions	10	03-28-2009 04:27 PM