ROM Upgrade

[Cawagula]

I don't wanna be a pain in the rear or sound like a noob, but when it comes to smart phones, I'm brand new lol.

I have a Verizon Touch; stock rom. I wanted to load Kaos' Touch Hybrid ROM but I'm a little confused.

I already backed everything up, I'm just confused on what to do; I have read the guides and understand them but I wasn't sure wether I could just unlock; run the NBH file from the RUU folder and be done or since it's a GPS Rev A Rom do I have to do something different?

Like I said I'm new so I'm a noob I know, but I just don't wanna fry my phone lol

Thanks for the help.

[Fatal_Error]

Just follow the instructions and you will be fine

[Cawagula]

Which instructions though, the first set of

“ Quote ”

Stock Rom To Custom Rom
1. download the custom rom of your choice.
2. connect to activesync and run the unlocker found here: https://www.wckediden.com/show...touch+unlocker
3. once done with unlocking the bootloader drop the nbh file (get when download rom) into the RUU Folder found here: https://www.wckediden.com/show...ghlight=RUU%2A
4. run the romupdateutility.exe and follow the wizards instructions on your pc

or the second set that says:

“ Quote ”

"#1- Backup all pim info and anything else you might want (yes flashing will erase/wipe out E-V-E-R-Y-T-H-I-N-G!!)
#2- Ensure you are currently running your carriers original official oem rom (os and radio) (if you have never flashed it at all then dont worry youre good to go).
#3- Unlock using imcokemans 2.31 unlocker (this for gps roms)
#4- run the sprint leaked rom.exe (here, close to the bottom where it says "original rom")
#5- SPRINT ONLY: allow all customizations to complete and run (i know - it takes a lil while)
#6- flash to desired rom.
#7- after she's all booted up, hard-reset.
#8- download and run cab from here (altell users run your own ppst stuff, non-sprint and non-altell users SKIP TO STEP 12): http://forum.ppcgeeks.com/showpost.p...&postcount=139
#9- allow soft-rest.
#10- navigate to \windows folder and run ppst.exe
#11- allow soft reset.
#12- allow boot-up, customize, restore pim info etc...

[Ketil]

I've been doing computer for 20+ years and have flashed stock roms on a number of treos and palm in the past. However, those were all using the supplied upgrades from the manufacturer.

So, I feel your pain as you decide whether or not to flash a custom rom. My main hesitation was that I wanted to be sure I had a stock rom to go back to in case things went bad.

Then I read the flashing tutorial in D/\sh's sig. And I read it again. And then one more time for good measure.

Followed everything in there just like he laid it out and flashed without any problem.

Just make sure you read everything until you are certain you understand all the steps and you'll be fine.

[COWHEAD]

Yeah follow the 1st instructions and if you neen to go back to your stock rom they should have it here also

[Cawagula]

Ok, I followed everything, and now when it starts up it just stays at the first boot screen, is it totally screwed over or is there something I can do?

[D/\SH]

“ Originally Posted by Cawagula ”

Ok, I followed everything, and now when it starts up it just stays at the first boot screen, is it totally screwed over or is there something I can do?

ok i will tell you what i will do... i will make a quick how to flash a touch aka vogue and pos in in this thread in about 45 minutes :>

[Cawagula]

Ok cool, but here's the thing lol, my phones not starting up is it bricked? It hits the first boot screen and the red numbers/letters come up they go away and it goes no further

Sorry for being a pain.

[Sh0wNuF]

“ Originally Posted by Cawagula ”

Ok cool, but here's the thing lol, my phones not starting up is it bricked? It hits the first boot screen and the red numbers/letters come up they go away and it goes no further

Sorry for being a pain.

try waiting for a while cause usually when you flash a new rom or do a hard reset it takes a while for the phone to load all of the settings in the rom

[Cawagula]

It was bricked, but I managed to fix it, I realized I was just an idiot and didn't install the Sprint ROM before installing the new ROM from Kaos... just a quick question though, anyone know if Kaos' ROM is supposed to look a lot different than the origonal stock cause it doesn't have the big clock or anything like before; just wondering if that was something I messed up or if it's supposed to be that way...

Another thing is now it won't connect to activesync; any clue why?

[Ketil]

Since you have now flashed to kaos' rom, you should probably ask questions specific to that rom over in that thread. That way he will see it and anyone else experiencing that will also see it explained there.

[D/\SH]

“ Originally Posted by Cawagula ”

Ok cool, but here's the thing lol, my phones not starting up is it bricked? It hits the first boot screen and the red numbers/letters come up they go away and it goes no further

Sorry for being a pain.

what do you mean it isnt starting up.... do you have the rainbow screen???? and also i will have to redo the video again becasue of this...

[Cawagula]

Well, I think something went wrong because it doesn't look like a ROM; I got it to start up but the problem is it's so flat looking and I know that's now how it should look... I've tried switching to a new ROM with pics but that looks the same way, blank;

Also, everything comes up unable to authencate your phone, when I try to make calls, ect ect, anyone know where to get the verizon stock rom at?

[wcked]

“ Originally Posted by Cawagula ”

Well, I think something went wrong because it doesn't look like a ROM; I got it to start up but the problem is it's so flat looking and I know that's now how it should look... I've tried switching to a new ROM with pics but that looks the same way, blank;

Also, everything comes up unable to authencate your phone, when I try to make calls, ect ect, anyone know where to get the verizon stock rom at?

few stock roms has been posted in the rom section just the matter of finding it

[Cawagula]

Ok, fixed everything now, at least I hope.

Re-Flashing to Kaos rom now and here's the problem. The RUU linked to the Touch in D^SH's post is not for the XV6900; so it kept installing the .nbh wrong. Other issue was just the A-Key gotta call VZW Support for that now

Thanks for all the help guys.

[D/\SH]

“ Originally Posted by Cawagula ”

Ok, fixed everything now, at least I hope.

Re-Flashing to Kaos rom now and here's the problem. The RUU linked to the Touch in D^SH's post is not for the XV6900; so it kept installing the .nbh wrong. Other issue was just the A-Key gotta call VZW Support for that now

Thanks for all the help guys.

yes it is if you downloaded from the correct area of the tutorial....... everyone uses it including myself for that video without troubles.

[dette]

Glad you got everything worked out for you!