[Mogul] Manilla 2d mogul

[eknoz]

i downloaded the rom from the scott link and now my internet doesn't work..when i go into conections it doesnt have sprint in there or *777

[1mrlcb]

“ Originally Posted by eknoz ”

i downloaded the rom from the scott link and now my internet doesn't work..when i go into conections it doesnt have sprint in there or *777

Install the dcd carrier cab here RIGHT HERE

[eknoz]

Ok. Thanks alot. Another thing is that when i connect my phone to the computer it pops up on the phone and says USB cable detected - Select a method - active sync (RNDID) , Active Sync (USB-Serial) ,Mass Storage and i tried all three but it wont connect on active sync

[1mrlcb]

“ Originally Posted by eknoz ”

Ok. Thanks alot. Another thing is that when i connect my phone to the computer it pops up on the phone and says USB cable detected - Select a method - active sync (RNDID) , Active Sync (USB-Serial) ,Mass Storage and i tried all three but it wont connect on active sync

Sure and hit the thanks button and try to pull out the usb cable then recconect because my phone even does that some times and make sure all the setting are right

[eknoz]

where can i get a rom with slide to unlock and all the features on this rom and icube?

[Superman369]

“ Originally Posted by eknoz ”

where can i get a rom with slide to unlock and all the features on this rom and icube?

Just use this rom and then dl the cab for slide 2 unlock

[D/\SH]

“ Originally Posted by eknoz ”

where can i get a rom with slide to unlock and all the features on this rom and icube?

you arent going to be able to fit all of that on one rom or even ocme close...... your device isnt capable because of memory limits.

[eknoz]

hey, one problem i am having with the rom is that when someone calls me it doesn't show up whos calling me. And sometimes it exits what im doing and says click here to start touchflo.

[Sh0wNuF]

“ Originally Posted by eknoz ”

hey, one problem i am having with the rom is that when someone calls me it doesn't show up whos calling me. And sometimes it exits what im doing and says click here to start touchflo.

I had that problem, calls not showing up, for a little bit too, but it fixed itself so i'm not sure what the issue is on that but for the random exiting, its because the touchflo always wants to be on top so no other today plugins will mess with it. If you don't use your open app for a few seconds then touchflo will override it and go on top. Your program sometimes will still be running in the background so you can get back to it with your task manager. As far as i know there is no fix for this

[dragonzkin]

This ROM worked absolutely great for 3 months, and then the phone started becoming unresponsive.

I tried multiple soft resets, and am about to try a hard reset. It especially bogs down (to the point of being useless) when trying to use hard keys for navigtation (front dpad or side scroller).

Tried completely emptying all email, txt, and PIM information because I thought maybe I was getting too full.

It started giving me an error message last week about trying to open a "" file and that something may be in use or corrupted.

Hard reset is going down today, if that doesnt work I'll flash to the same ROM again. Dunno what messed it up but I love this ROM too much to let it go!!!!

Any news on an updated version running the latest release of Manilla 2d?

Thanks!

[GokuSS3]

“ Originally Posted by dragonzkin ”

This ROM worked absolutely great for 3 months, and then the phone started becoming unresponsive.

I tried multiple soft resets, and am about to try a hard reset. It especially bogs down (to the point of being useless) when trying to use hard keys for navigtation (front dpad or side scroller).

Tried completely emptying all email, txt, and PIM information because I thought maybe I was getting too full.

It started giving me an error message last week about trying to open a "" file and that something may be in use or corrupted.

Hard reset is going down today, if that doesnt work I'll flash to the same ROM again. Dunno what messed it up but I love this ROM too much to let it go!!!!

Any news on an updated version running the latest release of Manilla 2d?

Thanks!

Sound like you should try to hard reset and if that does not helped. Then try flashing back to stock sprint rom. Then either flash back to this rom or pick another rom on the site and search 2d it should come up with the thread where has all the files to where you can make phone like it did with this rom

[dragshawn]

how do i change my sliding tone,i dnt even see it or is there a program i need to download for it

[monkeyxiv]

wait so this has 20 megs of ram with m2d running? hmm

with kaos's newest rom running m2d i gets 10 megs >_<

how quick is this rom for responsive?

[neo3500]

I am trying to install this however it gets to the progress screen and the program on my computer says there was a communication error and I have to start the recovery process...any ideas? I have a Mogul.

[D/\SH]

“ Originally Posted by neo3500 ”

I am trying to install this however it gets to the progress screen and the program on my computer says there was a communication error and I have to start the recovery process...any ideas? I have a Mogul.

have you unlocked your phone and followed all the correct steps for flashing that you can find in my signature below this post?

[mrpants20]

“ Originally Posted by THE I NCREDIBLE ”

By any chance, is there a hack I can use to edit the registry for the camera. When I was testing it out, I noticed there was no option to use the flash for taking pictures. I tried downloading one of those apps to where you can use your camera as a flash light, but as soon as I pulled up the camera it disabled the flash.

Any ideas?

“ Originally Posted by 1mrlcb ”

When i had my mogul flash worked for me but let me digg up the camera cab

For some reason I can't see like 30 posts (122-132sih) on this thread, I keep getting some Internal Server Error, any way.... So if I missed it sorry, but is there a way to fix the camera flash? I also can't get it to work.

[monkeyxiv]

i just ported this and i must say realy impressed it works really good so far nice and stable and really quick

one question though does anyone know if theres a way i can replace the tf3d contacts with icontacts when i go to the tab?

[n1nj4Lo]

Which of the carriers would be best suited for metroPCS, if any at all? Or could I just install any and just have to have my phone reflashed over to metro again, if they would flash the same phone with the same esn again...

[D/\SH]

“ Originally Posted by n1nj4Lo ”

Which of the carriers would be best suited for metroPCS, if any at all? Or could I just install any and just have to have my phone reflashed over to metro again, if they would flash the same phone with the same esn again...

at his website he has a universal with no bloat ware and than has the dcd carrier cabs built in so you could just run that for your provider if there is one. if not have none of the bloatware.

[monkeyxiv]

wow i can't figure this out for the life of me... everytime i close a program with this rom it opens up my dialer.. so basically i close a program then have to close the dialer...

[Sh0wNuF]

“ Originally Posted by monkeyxiv ”

wow i can't figure this out for the life of me... everytime i close a program with this rom it opens up my dialer.. so basically i close a program then have to close the dialer...

try installing a custom dialer...i think that is what ended up working for me when I had the mogul and was running his rom

[monkeyxiv]

worked like a charm and my dialer is sexy now ^^ thanks

[n1nj4Lo]

Anyone have or know of a mirrored site? All I get when I go to his website or even try to download the rar file from any Phone Provider it says error:



I'd really love to get the Titan/Mogul R4R Loaded Edition..

My hard drive with all of this crashed.. Thanks a lot!!

[D/\SH]

“ Originally Posted by n1nj4Lo ”

Anyone have or know of a mirrored site? All I get when I go to his website or even try to download the rar file from any Phone Provider it says error:



I'd really love to get the Titan/Mogul R4R Loaded Edition..

My hard drive with all of this crashed.. Thanks a lot!!

check out the ink to the developers page in the first post.

[n1nj4Lo]

Nevermind I finally managed to salvage the files and struggle them off of the hard drive...

Hooked it up into another desktop computer, went to that drive... Set up network sharing on the whole drive and copied the files I wanted one by one...

http://www.megaupload.com/?d=790113VT
Included are ftouchflo_v1.4.1.cab and ftouchfloconfig_v0.9.cab for smoother TouchFlo actions..

[elmdel]

Can you please re-post the Sprint ROM again, Tried to pull it down but no go

[D/\SH]

“ Originally Posted by elmdel ”

Can you please re-post the Sprint ROM again, Tried to pull it down but no go

the stock one? if so just go to the stock unsuported rom section and pick it up there or go to

Code

http://www.htc.com

and than you can download it there.

[sweetgurly21]

i have the kaos rom take 3 i wanted to know if i can flash directly to this. i also need a RUU link that would work with this rom update there are so many on the site i don't know which will work with my phone. i have the rom version 3.56 and radio version 3.42.02 from the kaos take 3 rom. if that makes any difference.

[D/\SH]

“ Originally Posted by sweetgurly21 ”

i have the kaos rom take 3 i wanted to know if i can flash directly to this. i also need a RUU link that would work with this rom update there are so many on the site i don't know which will work with my phone. i have the rom version 3.56 and radio version 3.42.02 from the kaos take 3 rom. if that makes any difference.

yup you can download and flash the samew ay you would for any custom rom.... this should come inside a ruu already so all you have to do is connect and run the romupdateutility.exe

[sweetgurly21]

i am getting the error 262

[GokuSS3]

“ Originally Posted by sweetgurly21 ”

i am getting the error 262

I am pretty sure that means you are not connected threw active syn !!!! I could be wrong tho

[sweetgurly21]

i think i have an activesync issue cuz i have tried twice and i keep getting error 262 i know i can do it with a memory card. how do i convert to fat32 or something like that.

--------- New Post Merged on 13/10/2009 at 03:06:51 --------

can someone please help

--------- New Post Merged on 13/10/2009 at 05:19:04 --------

“ Originally Posted by D/\SH ”

yes you can flash straight to this without unlocking again..... and for the flashing from sd card you will need a card 2 gigs or less and you need to format it to FAT32 (you will lose files so backup on pc) and than once you do that you take the .nbh file and instead of taking it and placing it in the RUU just rename to TITAIMG.nbh and drop on the card than manually place the phone into bootloader mode by pressing and holding the camera and power buttons while soft resetting and follow the prompts on the screen.

i think i got it figured. ok i did it with the storage card but its still on the gray screen saying "loading..." for like 10mins now, how long is it supposed to be that way. can i do something else

[D/\SH]

“ Originally Posted by sweetgurly21 ”

i think i have an activesync issue cuz i have tried twice and i keep getting error 262 i know i can do it with a memory card. how do i convert to fat32 or something like that.

--------- New Post Merged on 13/10/2009 at 03:06:51 --------

can someone please help

--------- New Post Merged on 13/10/2009 at 05:19:04 --------



i think i got it figured. ok i did it with the storage card but its still on the gray screen saying "loading..." for like 10mins now, how long is it supposed to be that way. can i do something else

no try to reformat and the nbh file renamed correctly (TITAIMG) has to be the only thing on the card which also has to be 2gb or less to do successfully...... and you are flashing this to a mogul correct?

[sweetgurly21]

yup its a mogul. i reformatted the storage card so i don't know what else. i guess i should forego this rom which isn't fair.