delay in call receiving

[travisscumming]

i found out that when prople try to call me, and ive tested this myself... the people on the other side hears the phone ringing 5 times before it satrts to show that i am getting a call on my end....i never experienced this in the earlies... i have throttle lock ,selboriyorker in conjuction with ultimate launcher... assistance would be appreciated

[Superman369]

Originally Posted by travisscumming

i found out that when prople try to call me, and ive tested this myself... the people on the other side hears the phone ringing 5 times before it satrts to show that i am getting a call on my end....i never experienced this in the earlies... i have throttle lock ,selboriyorker in conjuction with ultimate launcher... assistance would be appreciated

Thats because your phone only checks the tower every 5 seconds. Thats the default from sprint. You need your MSL to manually change it. Go here https://www.wckediden.com/showthread...ight=generator
Hit the thanks and the install button there. Obtain your MSL then change your SCI (slot cycle index) to 1 or 0(I have mine at 0) I believe you have to dial ##778# to get to your phones settings. If this helps, hit the thanks.

[TaylorSPJ]

Originally Posted by ofcsu1

Thats because your phone only checks the tower every 5 seconds. Thats the default from sprint. You need your MSL to manually change it. Go here https://www.wckediden.com/showthread...ight=generator
Hit the thanks and the install button there. Obtain your MSL then change your SCI (slot cycle index) to 1 or 0(I have mine at 0) I believe you have to dial ##778# to get to your phones settings. If this helps, hit the thanks.

Also i believe if you change your SCI your battery life goes down a little bit if i'm not mistaken due to more frequent signal searching.....let me know if i'm wrong...

[Superman369]

Originally Posted by Taylor

Also i believe if you change your SCI your battery life goes down a little bit if i'm not mistaken due to more frequent signal searching.....

True, but very very minor, not even noticeable really. This is the first mod I do on any WM phone.

[TaylorSPJ]

Originally Posted by ofcsu1

True, but very very minor, not even noticeable really. This is the first mod I do on any WM phone.

huh good to know....i was goin to do it cause where i live my reception is really bad and roaming goes in and out way to much durring calls....would changing it help with roaming?

[Superman369]

Originally Posted by Taylor

huh good to know....i was goin to do it cause where i live my reception is really bad and roaming goes in and out way to much durring calls....would changing it help with roaming?

You can turn roaming off. I hate roaming

[D/\SH]

Originally Posted by Taylor

Also i believe if you change your SCI your battery life goes down a little bit if i'm not mistaken due to more frequent signal searching.....let me know if i'm wrong...

naw it doesnt go down even enough to notice... i have left activated phones (no one had the number too) sit there with the sci to 0 on one and the stock on the other (same phone) and by time the one completely died the other one died within a couple minutes... so not much difference at all and the difference could have been in the battery.

Originally Posted by Taylor

huh good to know....i was goin to do it cause where i live my reception is really bad and roaming goes in and out way to much durring calls....would changing it help with roaming?

no that will only press the calls through faster. for roaming you will be looking at the PRL (preferred roaming list ) and to get that updated all you have to do is call sprint and tell them that you want it updated and they will do that for you :>

[Superman369]

Originally Posted by D/\SH

no that will only press the calls through faster. for roaming you will be looking at the PRL (preferred roaming list ) and to get that updated all you have to do is call sprint and tell them that you want it updated and they will do that for you :>

The master does it again. Hahaha.

[TaylorSPJ]

Originally Posted by D/\SH

naw it doesnt go down even enough to notice... i have left activated phones (no one had the number too) sit there with the sci to 0 on one and the stock on the other (same phone) and by time the one completely died the other one died within a couple minutes... so not much difference at all and the difference could have been in the battery.



no that will only press the calls through faster. for roaming you will be looking at the PRL (preferred roaming list ) and to get that updated all you have to do is call sprint and tell them that you want it updated and they will do that for you :>

Thank you good sir!! Roaming is the only thing that works out at my house....so i hope callin them helps.

[D/\SH]

Originally Posted by Taylor

Thank you good sir!! Roaming is the only thing that works out at my house....so i hope callin them helps.

let us know how it goes :>

[iLuvFon3s]

Hey..I looked through all of the posts on this issue...even replied to one, but never got an answer. Maybe because the post was so old, but anyway. I'm havin this issue and I used the app to get your msl, but it didn't work and I kept getting an error message. I can soft reset my touch and calls will come through for about a week, but then its back to delaying everything! Please Help!

[D/\SH]

Originally Posted by iLuvFon3s

Hey..I looked through all of the posts on this issue...even replied to one, but never got an answer. Maybe because the post was so old, but anyway. I'm havin this issue and I used the app to get your msl, but it didn't work and I kept getting an error message. I can soft reset my touch and calls will come through for about a week, but then its back to delaying everything! Please Help!

ask in the thread of the app that wasnt working for you and they will teach you how to use the app..... no need to jump from thread to thread sicne we dont even know the exact application you were using.

[iLuvFon3s]

Mr. Dash Sir..as previously stated, I did reply in that thread but no one responded so I tried another thread..I just assumed that the thread was too old & thats why I got no response...here is the thread: https://www.wckediden.com/showthread...nerator&page=5

[D/\SH]

Originally Posted by iLuvFon3s

Mr. Dash Sir..as previously stated, I did reply in that thread but no one responded so I tried another thread..I just assumed that the thread was too old & thats why I got no response...here is the thread: https://www.wckediden.com/showthread...nerator&page=5

than just quote it and bump the thread in the future please.... sometimes certain posts get lost in the scuffle..

[aprilsky]

Ok, I've searched the internet and this site and couldn't find anything. Yell at me if it's there and I just didn't see it. I got my MSL, but I have Verizon. Does anyone know how I can change the SCI on the touch pro for Verizon? This is extremely aggravating as I constantly miss calls. Thanks for any help and I know this post doesn't really relate to the original, but since everyone else was talking about it.... yea.....

[D/\SH]

Originally Posted by aprilsky

Ok, I've searched the internet and this site and couldn't find anything. Yell at me if it's there and I just didn't see it. I got my MSL, but I have Verizon. Does anyone know how I can change the SCI on the touch pro for Verizon? This is extremely aggravating as I constantly miss calls. Thanks for any help and I know this post doesn't really relate to the original, but since everyone else was talking about it.... yea.....

yup dial the number to get to your epst settings and than add that msl as your password and it will be right on the list called sci..... i dont know the numbers to verizons but it should be the same that you dial when you activate a verizon phone.

[aprilsky]

Originally Posted by D/\SH

yup dial the number to get to your epst settings and than add that msl as your password and it will be right on the list called sci..... i dont know the numbers to verizons but it should be the same that you dial when you activate a verizon phone.

Er... They don't ask for a password when you call that number. BTW, if anyone's wondering, it's *228. When you call, they ask you to press "1" to program your phone , "2" to update roaming capabilities, or "3" to change your phone. When I called, I tried entering the msl instead of "1" or "2", it said that it was not a valid option. So I pressed "1" to see what would happen. Nothing happened. It played music for a while and said that my phone was programmed successfully.
THEN, I tried ##778 instead of the ##778# that everyone was saying to dial and it took me right to it, where it says "view" "edit" or "cancel." When I hit "edit" it asked for the unlock code and my msl would not work. I finally tried "000000" and it worked!
So I had to hit the right soft key that said "View Info" and i went to "modem settings" and the slot cycle index was under there. It was set to 2 and I changed it to 0. Hopefully this will work and maybe help someone else out, too.

Thank you thank you thank you thank you!! :D

[D/\SH]

Originally Posted by aprilsky

Er... They don't ask for a password when you call that number. BTW, if anyone's wondering, it's *228. When you call, they ask you to press "1" to program your phone , "2" to update roaming capabilities, or "3" to change your phone. When I called, I tried entering the msl instead of "1" or "2", it said that it was not a valid option. So I pressed "1" to see what would happen. Nothing happened. It played music for a while and said that my phone was programmed successfully.
THEN, I tried ##778 instead of the ##778# that everyone was saying to dial and it took me right to it, where it says "view" "edit" or "cancel." When I hit "edit" it asked for the unlock code and my msl would not work. I finally tried "000000" and it worked!
So I had to hit the right soft key that said "View Info" and i went to "modem settings" and the slot cycle index was under there. It was set to 2 and I changed it to 0. Hopefully this will work and maybe help someone else out, too.

Thank you thank you thank you thank you!! :D

no troubles and trust me it will help.... make yourself a test call.

[Tilt13]

I am not able to go to the link get retrieve my MSL number. I am getting an error that says I do not have permission. Any suggestions on how to get around this? I am having the same problem and miss A LOT of calls.

Thanks,

Tilt

--------- New Post Merged on 14/6/2009 at 01:52:01 --------

Originally Posted by Tilt13

I am not able to go to the link get retrieve my MSL number. I am getting an error that says I do not have permission. Any suggestions on how to get around this? I am having the same problem and miss A LOT of calls.

Thanks,

Tilt

No worries i was able to figure it out.

Tilt13